How to make a Swan Neck for Standard Guttering | Gutter Supplies Tutorial
Вставка
- Опубліковано 5 вер 2024
- Gutter Supplies demonstrates how to make a swan neck for rainwater downpipe using two offset bends and a small piece of pipe.
Two offset bends are used along with a small offcut of downpipe to make the swan neck shape that returns the downpipe from the eaves back to the wall. These bends are a push fit connection so no glue or sealant is required. Usually referred to as swan neck bends.
Gutter Supplies, a subsidiary of Professional Building Supplies, specialises in the supply of Guttering Systems and associated products. We hold an extensive stock of top quality, innovative products from market leading suppliers and offer excellent customer service and industry expertise to help you choose the right products for your project.
Purchase our white standard half round guttering system here: www.guttersupp...
Subscribe to our channel for more useful guttering installation guides and reviews:
www.youtube.com...
Watch other episodes in our Workshop series - Installation & How To Guides:
• How to Install Plastic...
Connect with Gutter Supplies online:
www.guttersuppl...
Facebook: / guttersupplies
Twitter: / guttersupplies
Google+: plus.google.co...
Wish all diy video's were as clear and concise as this. He clearly knows what he is talking about. No awful music in the background.
Well done, very helpful video.
Thank you. That's very kind. I'm glad you found the video helpful.
7 years later this is still useful and helps me a lot, thank you
Exactly what I have been looking for. After 4 years fitted by a professional it has came away so now I know what is needed to fix this 👍👏
Brilliant. I replaced mine today, as now the bottom of the swan neck goes INSIDE the downpipe. Nice and dry.
Previous the bottom of the swan neck went outside/over the downpipe, which had water dribbling all over the downpipe.
Great video.
This was brilliant, clearly explained and demonstrated. I got my new downpipe put up and re-routed round a couple of turns in less than an hour! Thanks
Thank you for your comment. I'm glad you found it helpful.
good simple clear instructions on creating a swan neck
This is just perfect thanks... I am currently fixing a waterbutt and connector kit and your tutorial was great, easy to follow thanks again...👍👩🦳
Great to be of assistance and best of luck with your project! 💪
Thank you for this. Followed it to the letter worked a treat. Got me plenty brownie points with the wife. Legend
Thank you So much. Clear and concise instruction. 👍🏻
A very clear instruction from someone you know will do a good job - as shown. I'm looking at fixing what was a very good gutter but ruined by the neighbours contractor who soon went out of business! The wrong profile, the wrong height, and the wrong side of boundary!
Thanks, glad you found the video helpful!
you make it look so easy :) Thanks for a very helpful vid
Thanks, we're happy it has helped you!
Great presentation style. Very informative. Thank you
Thanks, we're glad it helps!
You're useful❤
This is excellent. Really helped. Thank you
Thank you. I'm glad it helped!
Excellent Sir.
Thank you
Thank you so much for showing how to join a facia gutter outlet to the downpipe.
Would like to know if the two small sections of pipe that you cut to connect the two bends is of the same diameter as the downpipe ?
very good advice and good recording
Thank you!
Geezer - great video
Very intersting, but you could if you wish safe the paper & pen idea and simply place the spigot into either end of both the running gutter outlet and the downpipe and simple measure across the space for the correct size of pipe required.
I generally use a self tapping screw to retain the running gutter spigot in place and free up both hands.
Don't mean to be a know all here, but my experience here is just hands on figuering out the job as I go along.
Mr Spence Eng
Good little video.
Thanks. I'm glad you found it useful.
Thank you so much for sharing....
We hope it helps!
Very creative
Or just stick both 45 bends in the down pipe and outlet measure the distance between then and cut your pipe
Do you screw these pieces together at all?
Great video! Thanks very much. :-)
Thanks! I'm glad you found it useful.
The last piece of pipe you cut. What's it for? And how did you determine its length?
Its length is determined by how much too short the bottom pipe was.
@@jeffreylewis9114 Good man, Cheers👍. I ended up just having a crack anyway and it turned out great.
But it won't work, cos whats if dowpipe facing to floor its much lower that on your video that's means it won't work your measurements, I'm I right?
Was the downpipe just resting on the floor at the bottom when you offered it for the swan neck mesaurement or already fixed in place by other brackets further down?
If it takes you this long to do a couple swans, the whole job must take you ages!!!😱😱
This video was created for educational purposes and doesn't reflect the actual time taken to do it without talking through each step. 🙂 That being said, the time taken will of course vary depending on the size of each job.
Sorry to be a picky, but you haven't explained why you have to put small short pipe between bends? Can you explain
Hi, thanks for your comment. One end of the offset bend is female (a socket) and the other end is male (a spigot). The small piece of pipe acts as a sleeve between these two ends and fills the gap between the bends. Hope this helps!
You didn't add cos without small pipe there will be a leak you mean? Also if dowpipe is not like yours length wise that kind measure won't work am afraid
So no need for glue in the joints?
U so much look like Tom Cruise really,I'm huge fan 😍😘
Thank you.
@@PBSLGroup welcome please tell me is there any job for me
Do you have adapters to join to a narrower pipe? our builders left the main down pipe empty into midair. Think its 2.5" diameter
How did you determine the height of the downpipe?
Hi, will 2 x 112.5 degree offset bends do the same job?
Yes, those are the correct bends to make a swan neck
Thanks for your reply.
How do you know what height to make the downpipe?
67.5 degree bends?......they are known as 112 degree bends around these parts....
Can you solvent weld downpipes?
Jaydon Towers no you cannot it's mainly push fit just get the measurements right and your fine
You can solvent weld them but we wouldn't recommend it in case you need to take them apart for cleaning at any point.