I’m so happy to see you do an assessment of these products. I purchased from HSN a few months ago. I didn’t know you had already done 3 videos before this one. I will be sure to look those up too. Thanks for the storage idea as well. I so appreciate your videos.
Kathy, I really appreciate that you watch the videos and leave comments. I'm so glad you find them helpful! Hopefully you have had time to play with your new pens and try them out...
Hi! You mentioned you wish they had a similar cutter for gift wrap - and there is one out there. Its called the Gift Wrap Cutter and it works beautifully! I got mine on HSN for about $20 over a year ago. Amazon is out of stock, but they do sell it on the giftwrapcutter website. Just thought I'd share.
Hello, Marilyn! Thanks for watching! I think We R released it within the last couple of months. I will get more use out of the pretty gold magnetic ruler, but I like the foil cutter too, since I seem to be collecting a lot of rolls of foil...
Hmmm, interesting! Sizzix sells a foam pad called The Stamper’s Secret (or something like that), I have one and will try this, curious to see if it’ll “work”! Thanks for sharing your tips and demos, certainly saves me some time knowing what works or doesn’t work.
hi I subscribed to your UA-cam channel n those little black thing u had in you're ✋ you can use them to set your pens on while you're using them so it doesn't burn anything or you! 😁
Helpful tip I learned from sewing and cutting fabric: Hold ruler down with left hand and cut along the right side of ruler...Will work much better. Remember to keep left hand fingers away from ruler edge!
I've seen someone use a heat laminator to apply the foil through a stencil. It seemed to work really well but I don't have a laminator to try it out myself.
If I’m not mistaken, the Hobby Lobby Heat Transfer foil is meant to be cut in the machine, with the design mirrored, then the foil side goes next to the material and you iron on the white side so it wouldn’t have worked with the pens.
I bought the cutting accessory and I love it, I also use it to cut rolls of vinyl for my cricut as well. Use a 60%off coupon at Joann’s and it’s only 12$.
awaiting my new toys just ordered the standard pen and paper but my question is I have cricut glitter iron on transfer sheets "12×12" can I use them with the Coral pens ?
I love my lil tulip iron, for some stuff... lol. I Actually have a VERY OLD Cast Iron- Iron... when I want a Real Hot transfer, I put that bad dude on a hot plate. A FLAT Bacon press, will do the same...
Hi...good tutorial :) thank you...I use the little black(mine r white)sticky 'holders' in my embossing powder tubs, they hold small plastic spoon, used to scoop the embossing powder onto the versamark impression. NB fyi... Metallic items seem to b great but, unfortunately... need to b avoided by any1 fitted with a pacemaker.
Thanks so much for watching, Lynda! Thanks for the tip on using the holders for embossing spoons. Yes, please be safe when crafting! I appreciate the heads-up on the metal items.
Would it be possible to use the freestyle pens to foil on fabric if you treated the fabric with fabric medium first? I will try that when I get my set and let you know how it turns out.
Found a 4 slot USB port at walmart that can plug in wall or another USB port. And post it signature flags from office store will close foil roll without damage
Hello, Carol! Thank you for watching! I had used a Teflon sheet for my first attempts (off camera) but realized it would not hurt the foil - if it was still attached to the carrier sheet.
I’m so happy to see you do an assessment of these products. I purchased from HSN a few months ago. I didn’t know you had already done 3 videos before this one. I will be sure to look those up too. Thanks for the storage idea as well. I so appreciate your videos.
Kathy, I really appreciate that you watch the videos and leave comments. I'm so glad you find them helpful! Hopefully you have had time to play with your new pens and try them out...
OMG you answered all my comments!
I love you. 🌷
Hi! You mentioned you wish they had a similar cutter for gift wrap - and there is one out there. Its called the Gift Wrap Cutter and it works beautifully! I got mine on HSN for about $20 over a year ago. Amazon is out of stock, but they do sell it on the giftwrapcutter website. Just thought I'd share.
Hello Danielle! Thanks for watching! Thanks for the tip on the gift wrap cutter. I will definitely check it out!
@@stampjg WE R Memory Keepers also has one and you can get it at Joanns. Looks good and more versitle, too.
I'll have to see if my local Joanns has it. Thanks so much!
Stampjg - StephG I love mine!
Thanks. I did not know that We R had the ruler and mat and cutter. They seem like great tools for someone who uses a lot of foil.
Hello, Marilyn! Thanks for watching! I think We R released it within the last couple of months. I will get more use out of the pretty gold magnetic ruler, but I like the foil cutter too, since I seem to be collecting a lot of rolls of foil...
Hmmm, interesting! Sizzix sells a foam pad called The Stamper’s Secret (or something like that), I have one and will try this, curious to see if it’ll “work”! Thanks for sharing your tips and demos, certainly saves me some time knowing what works or doesn’t work.
hi I subscribed to your UA-cam channel n those little black thing u had in you're ✋ you can use them to set your pens on while you're using them so it doesn't burn anything or you! 😁
Helpful tip I learned from sewing and cutting fabric: Hold ruler down with left hand and cut along the right side of ruler...Will work much better. Remember to keep left hand fingers away from ruler edge!
nice. i actually use my regular. and that works great for me. i do like the magnetic ruler.
Hello, MsCraftlife! Thanks so much for watching!
Oh no. I missed a word. I use my cutter. I start it after the edge and cuts great. Thanks for responding.
I've seen someone use a heat laminator to apply the foil through a stencil. It seemed to work really well but I don't have a laminator to try it out myself.
Love the craft iron....in a bind, you could use the little, craft iron to iron out any garment, in a bind.
The craft iron is really cute! It works ok too! 😎
If I’m not mistaken, the Hobby Lobby Heat Transfer foil is meant to be cut in the machine, with the design mirrored, then the foil side goes next to the material and you iron on the white side so it wouldn’t have worked with the pens.
I bought the cutting accessory and I love it, I also use it to cut rolls of vinyl for my cricut as well. Use a 60%off coupon at Joann’s and it’s only 12$.
Thanks for watching, Tonya! Gotta love the Joann's coupons! You scored a great deal.😀
awaiting my new toys just ordered the standard pen and paper but my question is I have cricut glitter iron on transfer sheets "12×12" can I use them with the Coral pens ?
I love my lil tulip iron, for some stuff... lol. I Actually have a VERY OLD Cast Iron- Iron... when I want a Real Hot transfer, I put that bad dude on a hot plate.
A FLAT Bacon press, will do the same...
Hi...good tutorial :) thank you...I use the little black(mine r white)sticky 'holders' in my embossing powder tubs, they hold small plastic spoon, used to scoop the embossing powder onto the versamark impression. NB fyi... Metallic items seem to b great but, unfortunately... need to b avoided by any1 fitted with a pacemaker.
Thanks so much for watching, Lynda! Thanks for the tip on using the holders for embossing spoons. Yes, please be safe when crafting! I appreciate the heads-up on the metal items.
Would it be possible to use the freestyle pens to foil on fabric if you treated the fabric with fabric medium first? I will try that when I get my set and let you know how it turns out.
Hello, Cynthia! Thanks for watching! That is a great question! I would really love to know if it works, so please do let me know.
Important tip for measuring, you are ignoring the first inch on the ruler. When you measured your 3', it looked like you really cut 4.
Thanks for watching Carol! I appreciate your comment!
Found a 4 slot USB port at walmart that can plug in wall or another USB port. And post it signature flags from office store will close foil roll without damage
Hello, madusonkeeper, thank you for watching! I love the idea of using post it flags!
I have never seen an iron used directly on foil.
Hello, Carol! Thank you for watching! I had used a Teflon sheet for my first attempts (off camera) but realized it would not hurt the foil - if it was still attached to the carrier sheet.
🙂
Thanks for watching, Shelley!