Had my v3 for a couple of years now and although it is expensive when compared to other items you can buy for the rig, it really adds to the immersion, it may not make you faster but it makes the whole experience more fun. When combined with VR it is awesome. when you get hit from the rear or when you drive onto the banked circuit at Daytona and the seat starts to tilt, big smile every time.
Fantastic addition for the sim racing experience!!! I've had it for close to a year and unfortunately caused trauma to the base of my thumbs from paddle shifting and having my seat to close to the wheel. This combo caused heavy forces applied to the thumbs with subsequent injury. I toned my DD1 and the longitudinal forces on the motion rig down, set my seat further back and do sequential shifting with my right hand ( I'm a US driver). It is apparent that the newer Sim racing equipment is starting to require the drivers to be more "in shape" to avoid injury and raised awareness of ergonomics when possible. I do love the motion rig and would not change it for the world, though.
Hello man, thanks for the vid. Thanks to you and Barry from SRG I ended up going to one of those. Considering before the DOF reality that was less than half of this price, but went with the v3 (smoothness, speed of reaction, software, form factor, noise). My conclusion, after having it simracing is just in another level, the feeling of the car through g forces, increase in consistency, modulation of braking, ability to use my 6channel bass shakers with its software, ... It is difficult to explain to someone without it how it feels... For me has created a huge leap in realism and immersion that didn't know can be felt in simracing. If you like this feeling and immersion, although is not a cheap gear, once you try it you just will find ways on how to get it, because it's addition makes so so so much for this hobby. Just mind blowing, unbelievable... Also for people worry about if it will make you slow, if you are competitive... Well I'm not by no means an alien, but I'm not slow at all and pretty competitive... After having the platform in specific tracks and Cars, it gave me this extra buffer to improve laptimes which I attributed to the extra information an feeling from the platform... It has never decrease my laptimes after having it, the opposite, in all cases a better performance on track, in some combinations (track/car) a good increase of performance and laptimes from before ...
Love mine. First one I bought was broken out of the box with a USB problem. Was replaced immediately be Pagnian and haven’t had a single problem since. It’s just an amazing transformative bit of kit for your rig. Pagnian were great to deal with too.
Fully agree with all your comments and feedback here, it is nice to have a product that doesn't need constant tweaking or fixing. Keep up the great work!
Having tried 2 full motion platforms before I know what you mean by trying one that’s turned up! First experience was a Motum Simulation chassis + 6DOF platform for a pre-AusGP promo event was quite an impressive first experience - combined with VR it was tuned quite well The other one I got to try was Tom Randle’s Dream Simulation with the CKAS 6DOF platform, which was designed for aviation experiences I’d wager 😅 but that was turned way up and took a good 15 odd minutes to be able to focus on what was on the monitors that were attached to the rig as well!
The simple and brutal truth about motion platforms: You need at least 5000$ today, to get a platform that actually works and does more than just create confusion. Why? All the cheaper systems do not provide enough acceleration or speed (200mm/s+) or low enough lag. For that you need PRS actuators (or actuators with similar specs) -> problem: even the smallest versions have a price tag of around 700$ for one single piece (!). And you still need a controllerbox, the frame, the rig... I use a Dofreality P3 right now, nice for some additional immersion, but in the end it is more a distraction if you really want to do fast lap times.
You are 100% correct. I also have. DOF P3 and immersion is great as all rig moves rather than just seat which is not a natural move in relation to feet and hand controls. But in the end if you want speed get a good wheel base and pedal set. I also have a P5 with PRS system and it is insane for realism way better than P3, but then again it’s not for everyone’s budget, but if you can afford it, it really is next level motion and you won’t drive anything else. Long live sim racing.
Great video as always. I'm surprised you haven't gone with the Traction Loss system that goes with this. It seems like that would add a ton of immersion and valuable feedback.
In a passenger car the G- forces you get taking a corner at high speeds can # 1 make you feel like your sliding across the seat even with seat belt on your legs feel like they are going to the other side of the car not to mention your feet wanting to slide off the pedals or when going air born your feet can go up and off the pedals towards the bottom of the dashboard . so does the seat mover that you have give that kind of sensation even if your feet don't actually come off the pedals from not having actual g forces
It doesn’t give the sensation to the same extent but it does give similar cues. So when you’re driving and everything else is going on the immersion level is pretty amazing. No compact system can simulate sustained gforces unfortunately.
Will, new to sim racing just bought a new DD1 and Podium button Porsche wheel and so on. I’m confused about button mapping, the process of programming them. A training video of some type would help newbie’s like me a lot. Really enjoy your channel. (Yes sucking up a little😀)
Each game handles that differently. in ACC with my SC2 and wireless wheel, I just clicked the assignment with the mouse and then the button on the wheel and it registered.
@@spellcaster39ify thanks I will keep working at it. Seems sometimes it works and other times nothing. It has been a learning experience going from consoles to PCs
Great overview. I agree less is more for sure. Been using mine for 2+ years and still love it. Been a great product, easy to tune and continually updated for games etc. I finally actually lubricated the rods on it. Lol.
Look forward to seeing your profile set ups, I've been using mine for nearly 2 years on mainly DCS World however I'm really starting to become interested in the sim racing world and keen to see how your settings compare to mine.
@@Yoda_NZ yeah pretty well. Adds to the immersion in vr. Only issue I have is pitching up my feet come off the rudder pedals at max pitch. But I doubt too many people are using rudder in that scenario.
@@Yoda_NZ its not overly bad I only notice it when I pitch hard. obviously it has the opposite effect when pitching down and if your tall like me it feels like being constricted but not uncomfortable just awkward.
Great channel, great review. One question, Where can I find the frame plate that you use to fix to your cockpit? What is the brand? Or is hand made? Thx a lot
Thank you for this 18 month follow up - great progress in 3 years, remember you paid a discount price for it. Tech question:, when I brake, my body is usually throw forward first by is momentum and then front suspension compression. Does this thing work in the work the when I brake, seat tilt back briefly (0.2s) then tilt downward more slowly (0.5-1s) to simulate the procedure? Further, if I combine this with the motion platform plus, can this simulation the body momentum (brake tilt backward) and the motion plus platform simulate the suspension change (tilt forward)? Thank you.
Thinking about getting this platform - I have the GT track so this would just bolt in. As you may know the GT track seat is fixed pretty much level for the seat part (I know the back reclines). Can you pls provide some input as to whether the motion platform provides for some seat inclination? Thanks in advance
With the seat sitting higher on the rig, and the wheel deck also raised, did you also jack up the pedals as well? Interested to know how you managed that on the p1-x. Great videos by the way. cheers.
Hey Will, I know this is an old video and you now have an actuator rig but I have a question for you... I am looking to build a rig with a center console, passenger diamond plate floorboard and triple 32" curved monitors. Do you think a seat mover would be ideal since due to the design of my rig a full motion I feel wouldn't work too great with keeping everything where it needs to be? My biggest concern with getting a seat mover is everyone that gives input regarding them states that they provide too much of a disconnect to driving, you had owned one longer than most anyone I can think of, what is your true thought on it now that you have experienced a full motion actuator style rig? Would you recommend someone with my above build go with a seat mover, or should I maybe look at the motion plus platform or actuators?
Honestly in your situation I’d probably get some powerful bass shakers and leave it at that. I run a Dbox on my daily driver rig for the past 3 years now and use it primarily as haptics. The seat mover was cool but it definitely made me slower.
@@boostedmedia I don’t do much competitive racing its more a build for myself to enjoy and be immersed, currently running 5 bass shakers, in the time that you owned your seat mover, did you find it to be a big disconnect from your rig? What I am mainly looking for is some additional immersion in VR and triples mainly feeling breaking and acceleration a bit more than the shakers can provide, also liked your concept of the seat mover with a harness on bungees to simulate breaking pressure! i am truly torn between a seat mover and actuator setup. With so many saying the seat mover is awkward to use but then I see many reviews of people who love it.
Wow glad I saw this, I have 4 of the motion v3 and noticed movement in one 3 days ago, wondered if it was normal, cheers mate, I have found them to be great, 2 of my sims have the traction platform as well with no problems apart from occasional resets on the traction platforms
In USA this is $3000. So I'm hoping we see a black friday sale also if Australia has it for about $2750 USD. I thought I saw it for only $2000 USD for a very brief time a year or two ago, not sure if that was a fluke or it was really on sale for a few days.
Thanks for the q&a, digging the new video style (i.e that cameraman you roped in haha), the sfx-100 kit is around the same price, albeit a lot more diy, when you cover the traction platform, can you investigate if it would be compatible with an actuator type motion setup? (i.e weight and mounting), all three combined would be epic! Epically expensive, but we all need that moon shoot concept to have wet dreams about haha
Will do, but in the meantime check out Barry from Sim Racing Garage's video here. He did exactly that with a PT Actuator's system so it's definitely possible - ua-cam.com/video/AzOBXu9gRtc/v-deo.html
The buttkicker alone adds about 1/3 of total immersion. The remaining 2/3 comes from motion (Feel) and vision (video). Its a game changer even without motion platform. Project cars 2, Assetto Corsa, FM7 come alive whether gaming in a console or PC. Hook it up to a home surround sound system with a subwoofer and you'll feel like you're at a race track.
would you ever want to build your own SFX100 motion rig? I would love to watch you source all the parts and build one yourself. It's very hard to find a place that has every bit of info in one place with videos. I'm very DIY but still looks daunting the more I look at it.
Had mine since the v2 came out then upgraded to the v3, and although mine is good I hate the back lash in the gears, if they sorted that out it would be perfect.
If its any help, try an iPhone 12 Max Pro as it would offer very smooth and higher quality recordings than Go Pro. For a phone its got amazing video quality and stabilisation, not to mention the first camera to record in Dolby Vision.
Another glorious vid. And another bitter little urchin who deigned to give it a dislike. Keep em coming my Australian ripper, has your brother tried it ? Can you link two together ? My Corona stock of beer has reached dangerous levels and I need to shop. Is it worth buying any of these new faulty consoles? I'm so confused.
I have a doubt that is driving me crazy ... I have a 27 "monitor, 1080p, and I consider it small ... I need a bigger one ... my options are: a 1080p AOC, 165hz or a 4k 60hz tv .. .use for simulators only ... the idea of the bigger size seems excellent to me ... will I lose a lot due to the update rate?
I have 3 x 27" monitors, all at 60Hz (their max) and I don't miss any details or have any issues. I used to have a 55" 4K and used TrackIR to look at the apex & mirrors. Honestly there is no comparison when you have the triple-screen. I also added the ASUS bezel-free kit. Epic.
Hi Will, I will be purchasing a Cube Controls FORMULA PRO matched with a Fanatec clubsport wheel base 2.5 soon and want to know if i need to buy any sort of an adapter or mount. Do i need a fanatec podium hub?
The GT Track didn’t stand up to the direct drive bases or high end pedals we were using it with. It developed a heap of flex in the wheel deck and pedal plate.
@@boostedmedia Oh now thats interesting since i am planning to buy a fanatec DD1 with that Rig. So i better stay away from that combination, right? Can you recommend a rig for DD Bases like that for under 1000€? :) Oh and greetings from germany.
hardly noticeable, I would be more worried about my sub woofer than this thing, also you could isolate your whole rig with rubber feet or a mat if you were really concerned.
Same question here - I am looking for a 80/20 that works well with my NLR v3. I found the "NLR motion base mounting brackets for P1(-X) " for P1(-X), but it says specifically on their website it won't work with the buttkicker add-on. In the video, the buttkicker seem to fit though. so the questions are: 1) is this the same adaptor on their website, and does it indeed work with the buttkicker add-on, and 2) will it also work with e.g. a TR160 or GT Omega Prime 80/20?
The version I have is before they changed the design of the brackets. The new design drops the seat lower in the rig which solves problems with the wheel deck uprights not being tall enough, but causes the buttkicker mount to interfere with the chassis.
Looking down at the comments, there are a lot of questions unanswered by yourself? This is so off putting!. I have questions but seems pointless asking them here if they dont get answered - shame. Unsubbed !!
Had my v3 for a couple of years now and although it is expensive when compared to other items you can buy for the rig, it really adds to the immersion, it may not make you faster but it makes the whole experience more fun. When combined with VR it is awesome. when you get hit from the rear or when you drive onto the banked circuit at Daytona and the seat starts to tilt, big smile every time.
How many hours on hour V3? I heard they last about 2000 hours is that right?
Fantastic addition for the sim racing experience!!! I've had it for close to a year and unfortunately caused trauma to the base of my thumbs from paddle shifting and having my seat to close to the wheel. This combo caused heavy forces applied to the thumbs with subsequent injury. I toned my DD1 and the longitudinal forces on the motion rig down, set my seat further back and do sequential shifting with my right hand ( I'm a US driver). It is apparent that the newer Sim racing equipment is starting to require the drivers to be more "in shape" to avoid injury and raised awareness of ergonomics when possible. I do love the motion rig and would not change it for the world, though.
Hello man, thanks for the vid. Thanks to you and Barry from SRG I ended up going to one of those. Considering before the DOF reality that was less than half of this price, but went with the v3 (smoothness, speed of reaction, software, form factor, noise). My conclusion, after having it simracing is just in another level, the feeling of the car through g forces, increase in consistency, modulation of braking, ability to use my 6channel bass shakers with its software, ... It is difficult to explain to someone without it how it feels... For me has created a huge leap in realism and immersion that didn't know can be felt in simracing. If you like this feeling and immersion, although is not a cheap gear, once you try it you just will find ways on how to get it, because it's addition makes so so so much for this hobby. Just mind blowing, unbelievable...
Also for people worry about if it will make you slow, if you are competitive... Well I'm not by no means an alien, but I'm not slow at all and pretty competitive... After having the platform in specific tracks and Cars, it gave me this extra buffer to improve laptimes which I attributed to the extra information an feeling from the platform... It has never decrease my laptimes after having it, the opposite, in all cases a better performance on track, in some combinations (track/car) a good increase of performance and laptimes from before ...
Love mine. First one I bought was broken out of the box with a USB problem. Was replaced immediately be Pagnian and haven’t had a single problem since. It’s just an amazing transformative bit of kit for your rig. Pagnian were great to deal with too.
Good stuff as usual. I like some of these shorter vids as can get through them quickly in a short break, like eating lunch for example
Fully agree with all your comments and feedback here, it is nice to have a product that doesn't need constant tweaking or fixing. Keep up the great work!
Having tried 2 full motion platforms before I know what you mean by trying one that’s turned up!
First experience was a Motum Simulation chassis + 6DOF platform for a pre-AusGP promo event was quite an impressive first experience - combined with VR it was tuned quite well
The other one I got to try was Tom Randle’s Dream Simulation with the CKAS 6DOF platform, which was designed for aviation experiences I’d wager 😅 but that was turned way up and took a good 15 odd minutes to be able to focus on what was on the monitors that were attached to the rig as well!
The simple and brutal truth about motion platforms: You need at least 5000$ today, to get a platform that actually works and does more than just create confusion. Why? All the cheaper systems do not provide enough acceleration or speed (200mm/s+) or low enough lag. For that you need PRS actuators (or actuators with similar specs) -> problem: even the smallest versions have a price tag of around 700$ for one single piece (!). And you still need a controllerbox, the frame, the rig...
I use a Dofreality P3 right now, nice for some additional immersion, but in the end it is more a distraction if you really want to do fast lap times.
You are 100% correct. I also have. DOF P3 and immersion is great as all rig moves rather than just seat which is not a natural move in relation to feet and hand controls. But in the end if you want speed get a good wheel base and pedal set. I also have a P5 with PRS system and it is insane for realism way better than P3, but then again it’s not for everyone’s budget, but if you can afford it, it really is next level motion and you won’t drive anything else. Long live sim racing.
Great video as always. I'm surprised you haven't gone with the Traction Loss system that goes with this. It seems like that would add a ton of immersion and valuable feedback.
Its amazing the kind of versitility available in SIM rigs that people are able to set up to increase immersion.
In a passenger car the G- forces you get taking a corner at high speeds can # 1 make you feel like your sliding across the seat even with seat belt on your legs feel like they are going to the other side of the car not to mention your feet wanting to slide off the pedals or when going air born your feet can go up and off the pedals towards the bottom of the dashboard . so does the seat mover that you have give that kind of sensation even if your feet don't actually come off the pedals from not having actual g forces
It doesn’t give the sensation to the same extent but it does give similar cues. So when you’re driving and everything else is going on the immersion level is pretty amazing.
No compact system can simulate sustained gforces unfortunately.
Will, new to sim racing just bought a new DD1 and Podium button Porsche wheel and so on. I’m confused about button mapping, the process of programming them. A training video of some type would help newbie’s like me a lot. Really enjoy your channel. (Yes sucking up a little😀)
Each game handles that differently. in ACC with my SC2 and wireless wheel, I just clicked the assignment with the mouse and then the button on the wheel and it registered.
@@spellcaster39ify thanks I will keep working at it. Seems sometimes it works and other times nothing. It has been a learning experience going from consoles to PCs
Great overview. I agree less is more for sure. Been using mine for 2+ years and still love it. Been a great product, easy to tune and continually updated for games etc. I finally actually lubricated the rods on it. Lol.
Look forward to seeing your profile set ups, I've been using mine for nearly 2 years on mainly DCS World however I'm really starting to become interested in the sim racing world and keen to see how your settings compare to mine.
Does it work well with DCS?
@@Yoda_NZ yeah pretty well. Adds to the immersion in vr. Only issue I have is pitching up my feet come off the rudder pedals at max pitch. But I doubt too many people are using rudder in that scenario.
@@nickrainey1077 Thanks. Interestingly I hadn't thought about that. Makes sense. for choppas and warbirds that could be an issue. Cheers
@@Yoda_NZ its not overly bad I only notice it when I pitch hard. obviously it has the opposite effect when pitching down and if your tall like me it feels like being constricted but not uncomfortable just awkward.
Great channel, great review. One question, Where can I find the frame plate that you use to fix to your cockpit? What is the brand? Or is hand made? Thx a lot
Great review/update. I love my NLRV3. 👍
Thank you for this 18 month follow up - great progress in 3 years, remember you paid a discount price for it. Tech question:, when I brake, my body is usually throw forward first by is momentum and then front suspension compression. Does this thing work in the work the when I brake, seat tilt back briefly (0.2s) then tilt downward more slowly (0.5-1s) to simulate the procedure?
Further, if I combine this with the motion platform plus, can this simulation the body momentum (brake tilt backward) and the motion plus platform simulate the suspension change (tilt forward)? Thank you.
Thinking about getting this platform - I have the GT track so this would just bolt in. As you may know the GT track seat is fixed pretty much level for the seat part (I know the back reclines). Can you pls provide some input as to whether the motion platform provides for some seat inclination? Thanks in advance
With the seat sitting higher on the rig, and the wheel deck also raised, did you also jack up the pedals as well? Interested to know how you managed that on the p1-x. Great videos by the way. cheers.
Great Video, I would like to see a video of your settings in some titles if you want to make one. I think it would get alot of views!
Hi. Great video. Did you end up driving the buttkicker with the V3 platform software or do you also run simhub or a separate software for the BK?
Hey Will, I know this is an old video and you now have an actuator rig but I have a question for you... I am looking to build a rig with a center console, passenger diamond plate floorboard and triple 32" curved monitors. Do you think a seat mover would be ideal since due to the design of my rig a full motion I feel wouldn't work too great with keeping everything where it needs to be? My biggest concern with getting a seat mover is everyone that gives input regarding them states that they provide too much of a disconnect to driving, you had owned one longer than most anyone I can think of, what is your true thought on it now that you have experienced a full motion actuator style rig? Would you recommend someone with my above build go with a seat mover, or should I maybe look at the motion plus platform or actuators?
Honestly in your situation I’d probably get some powerful bass shakers and leave it at that. I run a Dbox on my daily driver rig for the past 3 years now and use it primarily as haptics.
The seat mover was cool but it definitely made me slower.
@@boostedmedia I don’t do much competitive racing its more a build for myself to enjoy and be immersed, currently running 5 bass shakers, in the time that you owned your seat mover, did you find it to be a big disconnect from your rig? What I am mainly looking for is some additional immersion in VR and triples mainly feeling breaking and acceleration a bit more than the shakers can provide, also liked your concept of the seat mover with a harness on bungees to simulate breaking pressure! i am truly torn between a seat mover and actuator setup. With so many saying the seat mover is awkward to use but then I see many reviews of people who love it.
Wow glad I saw this, I have 4 of the motion v3 and noticed movement in one 3 days ago, wondered if it was normal, cheers mate, I have found them to be great, 2 of my sims have the traction platform as well with no problems apart from occasional resets on the traction platforms
Are you running a sim hub/arcade or are these personal setups of yours?
do you need that frame at 6:04 for flight simming in VR only and not car racing?
In USA this is $3000. So I'm hoping we see a black friday sale also if Australia has it for about $2750 USD. I thought I saw it for only $2000 USD for a very brief time a year or two ago, not sure if that was a fluke or it was really on sale for a few days.
For the love of all that is holy, what model seat is that? Absolutly love it!
www.lusomotors.com/portfolio/rcc-bucket-seats/
@@boostedmedia thanks!
@@boostedmedia how much was it? There is no price on the site, and i was looking for something like this one! :)
Great video, I am considering a similar setup. Did you comment the Buttkicker to the Motion platform or the seat and how?
@boosted media
The brakets are the originals? Just up side down?
Thanks for the q&a, digging the new video style (i.e that cameraman you roped in haha), the sfx-100 kit is around the same price, albeit a lot more diy, when you cover the traction platform, can you investigate if it would be compatible with an actuator type motion setup? (i.e weight and mounting), all three combined would be epic! Epically expensive, but we all need that moon shoot concept to have wet dreams about haha
Will do, but in the meantime check out Barry from Sim Racing Garage's video here. He did exactly that with a PT Actuator's system so it's definitely possible - ua-cam.com/video/AzOBXu9gRtc/v-deo.html
@@boostedmedia Whoa! Damn, need to start scalping 3080's or something... haha
Can I add the V3 to NLR Boeing military edition cockpit?
Great Video like always! What does the Buttkicker add to this motion platform or is it even needed? Thanks keep up the great work.
The buttkicker alone adds about 1/3 of total immersion. The remaining 2/3 comes from motion (Feel) and vision (video). Its a game changer even without motion platform. Project cars 2, Assetto Corsa, FM7 come alive whether gaming in a console or PC. Hook it up to a home surround sound system with a subwoofer and you'll feel like you're at a race track.
would you ever want to build your own SFX100 motion rig? I would love to watch you source all the parts and build one yourself. It's very hard to find a place that has every bit of info in one place with videos. I'm very DIY but still looks daunting the more I look at it.
Had mine since the v2 came out then upgraded to the v3, and although mine is good I hate the back lash in the gears, if they sorted that out it would be perfect.
You can remove it or tone it down in their control panel thing.
Does the buttkicker make any difference or add realism/emergence to the 3 platform together?
If its any help, try an iPhone 12 Max Pro as it would offer very smooth and higher quality recordings than Go Pro. For a phone its got amazing video quality and stabilisation, not to mention the first camera to record in Dolby Vision.
Another glorious vid. And another bitter little urchin who deigned to give it a dislike. Keep em coming my Australian ripper, has your brother tried it ? Can you link two together ? My Corona stock of beer has reached dangerous levels and I need to shop. Is it worth buying any of these new faulty consoles? I'm so confused.
Yep. There’s a video of his first try here:
ua-cam.com/video/bTGUDy_9tS0/v-deo.html
What steering wheel is that ? Looks awesome...
Hi Will I bought one of these after watching your videos. What type of lubricate do you use? The type is not specified in the manual.
I need this in my life 🇩🇰👌
The buttkicker is necessary if you have the NLR V3 motion?
The Simrig SR1 is the same price, 1 more DOF and 10 times better and better value. I have owned and reviewed both.
Nearly $3k difference in price here in Aus. SR1is about $6500 and NLR at $3800
Would you use the NLR v3 and the SR1 together or no point?
Do u plan on adding the Traction Module ? I think u can manage the weight limit as u only have rhe Motion Platform v3 mounted on the SimLab P1-X
Yep. We've had it here for 3 weeks now. Hopeing to install it this week once we have the triple 65inch screens up and running.
@@boostedmedia oh god I'm so excited ! How did I miss the update
Can you post your settings for let's say asseto coarsa
I have a doubt that is driving me crazy ... I have a 27 "monitor, 1080p, and I consider it small ... I need a bigger one ... my options are: a 1080p AOC, 165hz or a 4k 60hz tv .. .use for simulators only ... the idea of the bigger size seems excellent to me ... will I lose a lot due to the update rate?
I have 3 x 27" monitors, all at 60Hz (their max) and I don't miss any details or have any issues. I used to have a 55" 4K and used TrackIR to look at the apex & mirrors. Honestly there is no comparison when you have the triple-screen. I also added the ASUS bezel-free kit. Epic.
Are you able to use this product on console rigs? Like on a ps4/5 setup? Or does it need to be hooked to a pc?
It's just for PC mate. Almost all motion systems are because of the telemetry (I think)
Good info, many thanks. Question. I drive ACC with very heavy brakes 80 - 90 KGF. Any problem ? Thanks again.
I’m using 120kg brakes and no issues.
@@boostedmedia Thankyou Mr Strong legs !. Now you only need Viking arms.... :-) Keep safe Wil.
Will the V3 work with a Gt omega art cockpit?
Hi Will, I will be purchasing a Cube Controls FORMULA PRO matched with a Fanatec clubsport wheel base 2.5 soon and want to know if i need to buy any sort of an adapter or mount. Do i need a fanatec podium hub?
You’ll need either a podium hub or ClubSport universal hub for it to work.
@@boostedmedia Thanks Will.
Hi, where can i get the brackets to install it in a rig?
Does this only work on pc or can it work on ps5 and Xbox???
only for PC
Where did you get the brackets from?
Where can I get the same brackets he is using for the V3 motion platform?
Simlab sell them
Why did you move on from the Next Level Racing GT-Track to this one? By the way, what is the name of that pls? :)
The GT Track didn’t stand up to the direct drive bases or high end pedals we were using it with. It developed a heap of flex in the wheel deck and pedal plate.
@@boostedmedia Oh now thats interesting since i am planning to buy a fanatec DD1 with that Rig. So i better stay away from that combination, right? Can you recommend a rig for DD Bases like that for under 1000€? :)
Oh and greetings from germany.
can i use this for movie?
Will, I'd like to know how noisy it is, since I live on an apartment building. Do I bother the neighbors?
hardly noticeable, I would be more worried about my sub woofer than this thing, also you could isolate your whole rig with rubber feet or a mat if you were really concerned.
@@vinnymoody9674 Thank you!
is it compatible with consoles???
Hi Will, could you share your F1 2020 settings for the V3 platform software? I feel that the side to side movement is too aggressive.
I run overall strength at 60% and cornering forces at around 40%.
where did you get that bracket to mount the NLR to your 8020 rig?
You have to order that separately from Sim-Lab or a reseller.
Same question here - I am looking for a 80/20 that works well with my NLR v3. I found the "NLR motion base mounting brackets for P1(-X)
" for P1(-X), but it says specifically on their website it won't work with the buttkicker add-on. In the video, the buttkicker seem to fit though. so the questions are: 1) is this the same adaptor on their website, and does it indeed work with the buttkicker add-on, and 2) will it also work with e.g. a TR160 or GT Omega Prime 80/20?
The version I have is before they changed the design of the brackets. The new design drops the seat lower in the rig which solves problems with the wheel deck uprights not being tall enough, but causes the buttkicker mount to interfere with the chassis.
@@boostedmedia thanks. Is the width identical between the TR 160 and P1X - did the bracket also work for the TR 160?
hey , may i ask you what seat this is ? i cant find this looks interesting
It’s a Luso Motors RCC Mk2
@@boostedmedia thank you
Does it make much noise?
Not it’s actually remarkably quiet. Quieter than my wind sim.
agree
Looking down at the comments, there are a lot of questions unanswered by yourself? This is so off putting!. I have questions but seems pointless asking them here if they dont get answered - shame. Unsubbed !!
how tf do people afford this?! XD i only have enough money for chicken nuggets
Chicken nuggets are far more important!
@@boostedmedia AGREED!
Well if you go without your chicken nuggets for the next 20 years or so you too can have one
@@matta2738 yea but the prices will just increase
Nobody should ever go without nugz. It’s a basic human right.
Does this work with consoles or just pc