Nice job! Did you weld the brackets for extra strength? Also did you have any driveline issues, or tires rubbing the wheel wells? I have an 86 crewcab dually I’m getting ready to lower 6/8.
You should have done a before and after drive-by with the camera sitting on the sidewalk in front of your place. That way, we could all have really noticed the amount of drop as you cruised on by. ✌️😎👍
lower Cs lift Ks lol. I had the same issue, but in the end what's lifting a 2wd gonna do for you? vs lowering it and getting better on road performance and mpg?
I love the fact you’re teaching the younger generation good start but you must’ve went to the same auto shop and high schools I did because that’s exactly how I was taught
Nice job with the video and the lowering kit. I just lowered the same truck but I only went 3"and 5" in the rear. does the housing hit in the rear, is there enough clearance with out cutting a hole in the bed floor?
Hi mark. Yeah there is enough clearance. my tires are big so they do rub on the front inner fender when I hit a dip. I need to go with a smaller tire. Lowering shocks are required for better ride quality.
Hello. Thank you for your question. The geometry of the suspension changes. The drop spindles are machined to install the tie rod from the bottom to address the issue.
Hello. Any idea what shocks were used. Having a hard time finding for this 6/8 drop. I purchased the truck with this 6/8 already installed but no shocks. Thanks Jr
73-91 Chevy C3500 Deluxe lowering kit 6” Front / 8” rear. From western chassis in Corona, CA. The front spindles are machined perfect. I did had an issues with wrong parts.
Looks easy as shit, but I reckon without a doubt some language was edited out !! A few hammer to body parts activities usually open the air for language. Would defo be reading the manual on this! American trucks destroy the shit we have here in Australia!
More people need to video their stuff like you do right to the point no dumb intros you get an A+ sir.. and now I'm going to hit the Subscribe button
Right kind of weird how they were barely any fucking Dooley videos on UA-cam
Ya he didn't tell us about his kids baseball game lol or what he had for lunch
Same response I had
2 thumbs up for your daughter being out in the shop with you and not afraid of getting dirty
love the background music.. not too loud and a stellar choice.
looks beautiful. thank you for sharing. I have been wanting a single cab dually square for years.
Now this is a nice lowered truck. It's not slammed, the wheels aren't oversized. Very nice, indeed.
Amazing truck!! I enjoyed the old jazz playing in your shop!
Great video, hardly any talking and more showing how to do things. Great job
Hell yeah!!!!! Just get down & do it!!!! We dont need a freakin 20m speech before getting down!!! Sweet ass ride
I’m wanting to do this with my c20 and this made it looks way more achievable thankyou!!
same here.. there arnt many proper vids for the c20
Gorgeous!! I just picked up a Single Cab DRW C30 and that looks so perfect!!
Clean ass work bro 😎 love the simplicity and clean look, keep the video coming 👍
Nice job! Did you weld the brackets for extra strength? Also did you have any driveline issues, or tires rubbing the wheel wells? I have an 86 crewcab dually I’m getting ready to lower 6/8.
You should have done a before and after drive-by with the camera sitting on the sidewalk in front of your place. That way, we could all have really noticed the amount of drop as you cruised on by.
✌️😎👍
Certainly knows what he’s doing and fast. 😮
Not gonna lie, this looks badass. As much as I’d like to lower my c30, I kinda wanna lift it. Torn between the two
lower Cs lift Ks lol. I had the same issue, but in the end what's lifting a 2wd gonna do for you? vs lowering it and getting better on road performance and mpg?
You work fast, I like it!
Appreciate you Sir…
Have a 85 gmc K3500 single cab, been looking for a 2wd to drop… your rig is outstanding af. 👍
Sounds HEALTHY.. badass
you aint messing around keep up the good work carnal
Beautiful truck man !!!!!!
Those 1981 - 1982 Chevy & GMC C/K series models with the single headlamps are super rare nowadays.
Hi. I actually converted from dual headlamps to a single headlamp. I aligned and welded the light buckets to the radiator supports.
Wow love this... Optimal
Un dia genial para esa fantastica Dually y su dueño saludos desde Iztapalapa CDMX.
I'm such a Barbarian seeing you use all your fancy tools 🤣🤣🤣
I love the fact you’re teaching the younger generation good start but you must’ve went to the same auto shop and high schools I did because that’s exactly how I was taught
Good work. No BS. Good video edit too.
Sweet! I have a 86 GMC 1 ton dump truck I want to do the same.
Where did you get such an original immaculate beautiful c30? Nice
One owner. Low miles. Drives like new
Thanks for the video!!! Would you happen to have a part number for the shocks you put on?
Thank you Sir for sharing this with us i Appreciate it 👍
Nice job with the video and the lowering kit. I just lowered the same truck but I only went 3"and 5" in the rear. does the housing hit in the rear, is there enough clearance with out cutting a hole in the bed floor?
Hi mark. Yeah there is enough clearance. my tires are big so they do rub on the front inner fender when I hit a dip. I need to go with a smaller tire. Lowering shocks are required for better ride quality.
@@cheko323 what size tire?
Looks good. 👍
@6:10 Why did you put the tie-rod on the bottom instead of the top side?
Hello. Thank you for your question. The geometry of the suspension changes. The drop spindles are machined to install the tie rod from the bottom to address the issue.
Clean truck 👍
La mera reata!👍🏼
Hello. Any idea what shocks were used. Having a hard time finding for this 6/8 drop. I purchased the truck with this 6/8 already installed but no shocks. Thanks Jr
Nice and clean!
What kit did you guys use? Love the work!! Clean and fast!!! Subscribed!!!
73-91 Chevy C3500 Deluxe lowering kit
6” Front / 8” rear. From western chassis in Corona, CA. The front spindles are machined perfect. I did had an issues with wrong parts.
I bought this kit and had a problem with the front springs
My 86 suburban had a 454 new 5.3 LS and I guess because of the lighter motor I had these issues
Great stuff you really get to it.
Nice work g
Now that's more like it!!..
One youtuber to another 2 thumbs up
Im new to the dually scene, What rims and tire set up are on the black one's? Thanks
Nice job - quick question did your kit include the new bolt for the leaf pack? I have the same kit and mine did not?
Did you figure out the answer to this? I am pickup up an identical C30 and have to do this!
Thanks for the video ! Clean truck brw
what did you use for front springs?
Can you compare its height and length next to a land rover defender pickup?
wow absoulut dream truck
Hey, where's that cool cab over camper.
What size front shocks? Part # please
Looks easy as shit, but I reckon without a doubt some language was edited out !! A few hammer to body parts activities usually open the air for language.
Would defo be reading the manual on this!
American trucks destroy the shit we have here in Australia!
Great video!! You made it look easy. 🫡
Apparently it never spent anytime up around Chicago..ha, 2 year old trucks are rusted waaaay worse
dope as shit homie !!
Nice!!!
What year?
Why? Are you like 16? I hope you added a cold air intake and fart can muffler!
Need more low
You had me cringing when you were cutting the frame.... I wouldn't have done it
A mile high lol
To bad its a single cab
Put that 4,000 pound cab over camper back on it now ..
you destroed it🥲
What's with people now days all ways want to lower there vehicles so stupid when people do that
Is it your truck?? Imagine being so miserable with life that you have to trash other peoples hard work. Pathetic