Looks good, the only issue I have is why do these companies say 6s capable but you should power it up with lower voltage. I have the dji fpv system and it's the same thing. Don't advise 6s capable if it can be damaged, dji is the same way.
Am I silly to think I can power up my hdzero freestyle and camera to a lipo battery only and get video on my transporter 2 hd goggles ? Sucks I don’t have a pc trying to set up a camera on an rc car. Can you help me? I’m happy to leave super chat $ for helping me. This is my first drone hardware experience. I hope this message finds you. Cheers 🍻
Hello - excellent information and video. First of all, I prefer to use INAV (Long Range Quadcopter). I was hoping to see a lot more information on HDZero setup for INAV. All I see (via youtube) is all betaflight related with very little info on INAV. 1st Question: Can you and do you have any interest doing a quality HDZero Inav setup video for quadcopters. You would be the first as I cannot find a good source for this. 2nd Question as it relates to INAV Port setup: I am well aware that INAV does not support smart audio or use VTX Tables. So, all the setup videos, on youtube, regarding BetaFlight can not be use with INAV. Lets assume I have HDZero VTX with TX/RX leads connected to UART2 on the flight controller. What is the port setup in INAV? Do I use one or two ports? I would assume UART2 is either MSP enabled or Peripheral Enabled (with selecting HDZero VTX)? Is this as simple as INAV only using one UART to setup with INAV? Which one and why? Thanks and appreciate all you do!
Sir, Many thanks for this informative video. And .please tell us is there any other company manufacturing Ics which can meet the functions of Amimon video HD transmitter and reciver ics..?.
Good stuff - would the VRX module fit the EV300O goggles? I know the original VRX was designed for FATSHARK goggles so wondering about the new HDZero VRX
Yes, many people use the original Fatshark VRX with the Skyzone O4X, which is physically identical. I believe many people custom print an adaptor for easy attachment, but this may not be necessary. I'm about to setup my EV300O with HDZero so will report back.
@@MadRC That's fantastic news. I took too long deciding to buy our not (at cheap prices too) and by the time I had made my mind up, everywhere was sold out. He who hesitates...
please stop saying that a "smokestoper" prevent ANYTHING to go up in smoke ... having a short on a 1.3, 3.3 or 5v rail, the thing wont stop anything ... 0,5 or 1 amp is enough to burn the low voltage circuit... its only good if you done something wrong on the ESC power side
too complicated all this stuff should just plug together by now with out all this soldering i think i'll wait 5 more years until the industry can sort itself out and agree upon some standards
Love me some Haytch Dee. Great video, thanks!
When he said "cameras made for dji are not compatible with HDZero"...I felt that...**staring angrily at the dji cam I bought**
Great video! Thank you for your information!
Do you have a guide of use HD Zero with FrSky X20 HD?
Great video excellent for the pilots that want to used the system but don't know how to set it up.
Great Video for anyone looking for the switch. I think I am ready
Great explanation on HDZero 👍🏻
I use the dji plug to get all mine going for easy setup and to be able to work on the quad
Hi Elroy,
Can you said if you need to make some change when using dji plug? Remapping ressource or something like that?
No changes needed
Excellent video Ian. Thanks.
Yet another brilliant video
Thanks, this video was just the thing I needed!
This is great stuff Ian! Thank you so much!
For KiSS Ultra owners, hdzero canvas 5020 support.
Good video but i can't seem to get it to work with x20 hd
Nice 👌🏼 👍🏽
Looks good, the only issue I have is why do these companies say 6s capable but you should power it up with lower voltage. I have the dji fpv system and it's the same thing. Don't advise 6s capable if it can be damaged, dji is the same way.
I fly fixed wing FPV. I don't use INAV, I use ZOHD KOPILOT or a stabilized receiver. Can HDZero be used standalone, without a flight controller?
Hopefully you don’t need a flight controller correct?
Am I silly to think I can power up my hdzero freestyle and camera to a lipo battery only and get video on my transporter 2 hd goggles ? Sucks I don’t have a pc trying to set up a camera on an rc car. Can you help me? I’m happy to leave super chat $ for helping me. This is my first drone hardware experience. I hope this message finds you. Cheers 🍻
00:23:53 I do not recommend Soft Serial on BF using MSP / Canvas on HDZero / Shark Byte. Just wanted to make it clear.
Works fine with Inav.
Thanks for this video Ian. Can I use a soft serial port for the smart audio ?
Hello - excellent information and video.
First of all, I prefer to use INAV (Long Range Quadcopter).
I was hoping to see a lot more information on HDZero setup for INAV. All I see (via youtube) is all betaflight related with very little info on INAV.
1st Question: Can you and do you have any interest doing a quality HDZero Inav setup video for quadcopters. You would be the first as I cannot find a good source for this.
2nd Question as it relates to INAV Port setup: I am well aware that INAV does not support smart audio or use VTX Tables.
So, all the setup videos, on youtube, regarding BetaFlight can not be use with INAV.
Lets assume I have HDZero VTX with TX/RX leads connected to UART2 on the flight controller.
What is the port setup in INAV?
Do I use one or two ports?
I would assume UART2 is either MSP enabled or Peripheral Enabled (with selecting HDZero VTX)?
Is this as simple as INAV only using one UART to setup with INAV? Which one and why?
Thanks and appreciate all you do!
Sir, Many thanks for this informative video. And .please tell us is there any other company manufacturing Ics which can meet the functions of Amimon video HD transmitter and reciver ics..?.
how fo I get video on orcas fpvone goggles v2 please help I have the right mini hdmi cable for these goggles what settings do I need for the goggles?
You simply need to select HDMI.
That sharkbyte RX5 its discontinued, so, what module or thing we can use HDzero, need info
Good stuff - would the VRX module fit the EV300O goggles? I know the original VRX was designed for FATSHARK goggles so wondering about the new HDZero VRX
Yes, many people use the original Fatshark VRX with the Skyzone O4X, which is physically identical. I believe many people custom print an adaptor for easy attachment, but this may not be necessary. I'm about to setup my EV300O with HDZero so will report back.
And where can you buy the hdzero?... Can't find them anywhere
Looks like canvas mode coming to inav soon for hd zero!!
Yea won’t be far off now.
Already available in Beta 4.1 :)
@@Pilotltdthanks I know what I'm doing when I get home.
Hi, WHERE CAN I BUY THE EXTERNAL BOARD TO CONFIGURE THE VTX?? thank you.
Don’t know if this is a dumb question but if I buy a nazgul5 v2 analog will this work or do I need to buy the hd version
Hello, I want to buy video receiver to my ev300os but it is out of stock at all (I'm from PL) when can we get it?
Can hd zero be over soft serial?
Where can I buy the Sharkbyte V2?
good video i am currently building a spec wing and would like to use the system without a flight controller, is this possible ?
Yea HDZero does bot require an FC but you would loose the menus via the Rc. You could need to use the small board to configure.
Where to buy the receiver now that they have stopped production?
New supply HDZero VRX will be available soon. Hopefully by March at latest. Global supply issues still having an affect.
@@MadRC That's fantastic news. I took too long deciding to buy our not (at cheap prices too) and by the time I had made my mind up, everywhere was sold out. He who hesitates...
@@MadRC nice info, we will wait then, so if i buy the HDO2 right now for using with hdzero laterz it's still worth it?
please stop saying that a "smokestoper" prevent ANYTHING to go up in smoke ... having a short on a 1.3, 3.3 or 5v rail, the thing wont stop anything ... 0,5 or 1 amp is enough to burn the low voltage circuit... its only good if you done something wrong on the ESC power side
too complicated
all this stuff should just plug together by now with out all this soldering
i think i'll wait 5 more years until the industry can sort itself out and agree upon some standards
Step 1) Take HDZero and throw it in the trash
Step 2) buy DJI
But why ?
Tell us you have no idea what you're talking about without saying you have no idea what you're talking about
@@MadRC Cause DJI does it better and still does a year later lmao
@@jayb3385Tell me, what looks better DJI or HDZero? If you say HDZero you're a liar lmao
@@ryan39584 🤡🤡🤡