Audi Q3 front brakes replacement. How to replace Front discs and pads.

Поділитися
Вставка
  • Опубліковано 11 вер 2024
  • Hello guys!
    #AlexTheGrumpyOne here with another video for you :)
    This is a video on Front brakes replacement on your Audi Q3 and also many other Volkswagen, Audi, Skoda and Seat cars. This set up is used on many VAG group cars, so will be helpful to many people out there.
    In this video I will show you how to replace and service front pads and discs.
    Please follow all the instructions properly and make sure that everything is safe and done up properly!!!
    Torque settings:
    Carrier to hub bolts 180-200NM
    Calliper to carrier 30NM
    Tools used in the Video are mainly from #Drapertools and are awesome quality:
    149 Piece Metric Socket set:
    amzn.to/2Tnt4qM
    1/2 Impact gun 400NM:
    amzn.to/35a1r7a
    1/2 Torque wrench:
    amzn.to/2Th9kF1
    Water pump Grips:
    amzn.to/3pI3IzZ
    If you need anymore help, just let me know and I can even do it in few different languages : English, Portuguese, Spanish, Russian and Ukrainian.
    Before you go don´t forget to Subscribe, like and share :)
    Comment below to let me know where are you from and what you think about my video :)
    Equipment used to film:
    Canon 90D: amzn.to/2TuhQxb
    Canon lens: amzn.to/3kwMEJJ
    Samsung S10: amzn.to/2TqszIW
    Tripod: amzn.to/2HzFPZo
    Gimbal: amzn.to/3dXYhH0
    Thank you!
    Obrigado!
    Спасибо!
    Дякую!
    Gracias!
    Good Luck and Stay Safe!
    Instagram: alexthegrumpyone
    Facebook page: alexthegrumpy1/
    Facebook group: groups/alexthegrumpyone

КОМЕНТАРІ • 16

  • @KamChana-mn1fx
    @KamChana-mn1fx Рік тому +1

    Thank you for the video, really helpful. As over the years, I open the brake fluid reservoir cap, release the pressure when pushing the pistons back. Then check the fluid, might be over the top level.

  • @ianroscow2407
    @ianroscow2407 10 місяців тому +1

    Good job description, thanks Alex. Got to do my Q3 brakes now, squealing like mad! Tip: after cleaning and using the grease I usually change my gloves to avoid contaminating disc and pads. And when that's done I then have to sort out my Velocette LE 😉

    • @AlexTheGrumpyOne
      @AlexTheGrumpyOne  10 місяців тому

      Awesome 👌 well done 😀 I'm glad that it helped

  • @mattjohnson9245
    @mattjohnson9245 10 місяців тому +1

    Thanks Alex, excellent tutorial on the brakes. Managed it with ease, well…. Apart from getting that spring back on 😂. Cheers

    • @AlexTheGrumpyOne
      @AlexTheGrumpyOne  10 місяців тому

      Well done 😀 that's great news! Thank you very much for the feedback 😀

  • @curttheboywonder
    @curttheboywonder 3 місяці тому +1

    Zomfg the rears require the triple square bit. That was horrendous.

  • @elissatray7983
    @elissatray7983 6 місяців тому +1

    2016 q3 the electric handbrake won’t affect changing the front pads will it?

    • @AlexTheGrumpyOne
      @AlexTheGrumpyOne  6 місяців тому

      No. Front ones are just normal ones. Just make sure u have got enough room in brake fluid bottle for all the fluid to retract to when u push pistons in

  • @Dayvidb_
    @Dayvidb_ 9 місяців тому

    Good stuff thanks 👌

  • @Joe-ze2wg
    @Joe-ze2wg Рік тому +1

    Thanks for this content keep it going. Question. After everything is installed and you pump the breaks is the break fluid cap still left of at this point ?

    • @AlexTheGrumpyOne
      @AlexTheGrumpyOne  Рік тому +1

      No worries. U are welcome!
      At that stage as long as you got enough brake fluid in there u can close it

  • @nemopercula5767
    @nemopercula5767 Рік тому +1

    @alexthegrumpyone hi mate question out of this context please. Do you know anything about GWM Cannon X UTE. Does this mute have Add Blue? Is it a good ute.