How to Replace the Electric Cooker Regulator Base

If you should have to replace the regulator base on your electric cooker, this video will help walk you through the process. Follow these steps carefully to ensure the regulator base is properly replaced.
Place the regulator housing into the lid, making sure to line up the tab on the housing with the opening on the rim on the lid.
Place the round metal disk into the round bottom of the housing.
Insert the steam vent pipe with the threaded side going in first.
Holding the steam vent pipe with your finger, flip the lid over and keep your finger on the pipe so it doesn’t fall out of place.
Place the small silicone washer on the end of the steam vent pipe and push it all the way down to the base of the threading.
Place the curved metal disc on the pipe with the curve facing up and push it all the way down to the small silicone washer.
Place the metal dish with three prongs on the pipe and push it all the way down to the curved metal disc.
Take the nut and screw it down the threading. Tighten with a wrench.
Place the anti-blocking case on the prongs of the disk and push it down to click into place.
Flip the lid over again and place the regulator back into the base.
Join the Zavor Community on Facebook for cooking tips, recipes, deals, promotions, exclusive giveaways, and more!
➤ / zavor
Follow us:
➤ Facebook: / zavorofficial
➤ Instagram: / zavoramerica
➤ Website: wwww.zavoramerica.com/
#zavor #zavoramerica #customerservice #howto #replacepart #multicooker