LED Front Turn Signal Bulbs 2017+ Ford F250 F350 Super Duty Amber or Switchback
Вставка
- Опубліковано 21 сер 2024
- Now shipping with the brighter and better looking Armor Series LED bulbs. Find them here: bit.ly/3LLjDrk
We tested several different front turn signals trying to find the best and brightest options for traditional amber/amber operation, as well as the new style white/amber Switchback LED bulbs and we now offer them in two kits!
The Switchback LED bulbs kit operates how you would expect it to, on the parking light circuit it shines white like a Daytime Running Light. And on the blink/turn signal it switches to a high power amber LED light. The white from the switchback bulbs is a little less blue than the Supernova V.3 headlight bulbs.
The amber/amber option simply does amber light on both parking and turn functions but it's way brighter than stock!
For anyone who is wondering, you do not have to remove the grill to change the bulbs. If some people would just take the time to look in the owner's manual it tells you how to do it. For passenger side you have to remove the intake tube and the driver side you have to remove the windshield washer tube(both of which are way easier than removing your grill and headlights). Cant believe there are so many videos of people removing their entire grill just to change bulbs. Ford is smarter than that.
What page on the owner's manual
Adam Trevino I was wondering the same thing why everyone is making this way harder than it needs to be
You da real mvp
PRODUCT REVIEW.....so I purchased the fog lights (also reviewed) and they performed so well I went all in and purchased the entire LED collection (fog lights, SWITCH BACK TURN SIGNALS, headlights, tail & reverse lights). I can only compare/rate these to the OEM, but YES!!!!! The light color and look is fantastic. The pattern was so good that they lit up enough to compare to the fog lights. Even compared it to the LED option Ford offers, and although I don't have scientific numbers, side by side, they looked to be better in every way then Ford's LED. Only time will tell on durability but so far these are 1 of the best looking and performing LED upgrades I have ever seen.
Roman B thanks for the feedback. We have tested our LED bulb kits in headlights and fogs to the OEM LED in F150 and F350 trucks and the Supernova LED bulb kits are way brighter.
Confirmed these bulbs/kit work on the 2020 xlt f250. Thanks for the good video. Might note that the passenger side wire isn’t blue/green. Both sides have the black and blue/grey wires. I just guessed and tapped into the other color that didn’t match and it worked. No hyper flash.
Thanks for watching, and for the fitment tip!
Lol goes through the effort of using a wire stripper, and solders the connection but doesn't use heat shrink and tapes it up... Classic!
Sgt. Shill, Thanks for your comment. I agree heat shrink is the ideal application for covering solder points, but because he was tapping into a wire, creating a T there really was no easy way to use it. He could've cut the wires to make the connection and heat shrink it, but on someone else's vehicle, we don't like doing that.
Headlight Revolution sounds legit... Lol I'll still place an order with you guys picking up my replacemt for my 06 Harley Davidson Edition this week and just could not justify an almost 5k for the factory LED option no matter how much I like it.. Keep doing things with the super duty trucks always makes for an interesting upload!
For Ford specifically rather than telling people to put in those resistors I think you should show them forscan and how to go into the pcm and just turn off “bulb outage” much cleaner and no wire cutting. Forscan is free and the wireless obd2 module is fairly cheap. Just a thought.
That is a great option, but that would be fairly specific, and lets be honest, most normal people are not going to go get that tool just to flash the turn signals. Good idea though!
Why not hook up computer and change setting to "no outage" then u dont have to worry about a hot transformer. Or damage if it gets wet
I realize this video is like 4 years old, but does anyone make a plug in resistor yet? I'm not cutting wires on a brand new 50k dollar truck....
There are nun available yet, but there is a resistor free LED bulb called the GTR Carbide that we offer.
My dream, to convert all my exterior lighting on my 2017 F350 to led. One day it will happen.
We are here for you! Feel free to reach out with any questions. -Chris W
Don't be that guy that thinks his truck looks nice when in reality he's just blinding everyone and pissing them off
I got the Switchback bulbs last year for my 2017 Ram 1500. I followed instructions and did the install and worked fine. But, when I turned on my turn signal lights (only at night when head lights and running lights are on) I would get a bulb out warning on my dash. Doesn't happen during the day when headlight and running lights are off, only at night. Contacted Headlight Revolution to solve problem but never got an answer back. Any suggestions?
Great video very detailed 👍👍
Glad you enjoyed it! Thanks for watching!
Unless it's the same thing you should do a video about the 2011-2016 super duty LED turn signals
We don't have a video yet, but the process is very similar!
Great install video and good advise. Going to subscribe
I love it.....how much is it for the kit?
Henry Recinos check the link in the description please.
I have the Morimoto led switchbacks. I'm just wondering if these dim after being on for a while? i just noticed that when i dont have my parking lights on my turn signal is the right amber color and bright. But when i have my parking lights on (DRL) for just a couple of minutes the turn signal becomes dim with a ugly dark orange color.
I have a 2017 Ford expedition xlt el and I want to upgrade the signal lights already have the led bulbs but works kind of funny what's the name of the yellow things thanks
I installed these and instead of all three wires being hooked to plug, I have two wires connected with the third being cut and taped back out of the way. Why would this be?
I installed but the switch back does not stay white
Any suggestions? Tia
You will have to reattach that wire to the connector, that will be the DRL wire that will provide power to the bulb for it to stay on white. Let us know if you have any other questions, we are here to help! Have a great day!
My 7444 sockets has 4 wires: 2 black, 1 purple, and 1 blue. When I strip all 4 do I use electrical tape to cover up the unused wires that I don't need the resistor on?
Yes, you sure do!
I would definitely throw some electrical tape on that so that you don't see any corrosion!
What if I wanted the switch backs but my turn signal doesn’t turn on at all until I actually activate it by using the turn signal stock?
These are designed to work with vehicles that use the turn signal as a running light, so they will not work if your bulb doesn't do that from the factory. They are designed to replace the factory bulb, and get you more light output for a safer more visible turn signal!
Front turn signal bulb in a 2015 ford expedition
www.headlightrevolution.com/7440-7443-gtr-lighting-carbide-bulbs-LED.BUL.7443.CAR2_2
What style does a 2017 super duty use for switchbacks STD. or CK ?
Why didn't you after soldering have used heat shrink??
Some ford already have the white leds
should of came like that from the factory
We agree.
Most models do.
The LED upgrade is something like $2k from Ford. Ridiculous!
Any idea if you go to install a switchback on a truck already equipped with OE LED lights if you need the resistors or not? I LOVE the switchback affect on my DD and want to continue that when I get my new pickup.
The switchback function doesn't really have anything to do with the resistor itself, the resistor is in place so you don't get a fast blink error. So long story short, yes you still need the resistor, but not necessarily due to having a switchback bulb. You do it for all LED turn signal bulbs regardless.
If you already have and led turn signal most likely your truck had the led relay flasher already so no need for resistor
My previous truck had a ep27 led relay flasher
With these bulbs do they fall out the socket thanks
Nope!
what is the light you installed on the side marker? I heard GTR LED light but no part number or anything to identify it.
i was told it's a T10
Why would you want to go from amber to white?
It does both amber and white. Gives you a DRL style function when your truck never had one. The amber is also brighter than your original bulbs, so that's an added bonus when turning
I get flickering on my turn signals wen my truck is running can some one help me with that..??
Komander Ramirez you ever figure this out?
Flickering issue?
Whats the link ?? I need do this asap to my truck
headlightrevolution.com/2017-ford-f250-f350-super-duty-white-amber-switchback-led-front-turn-signal-bulbs-upgrade-kit/
headlightrevolution.com/2017-ford-f250-f350-super-duty-amber-led-front-turn-signal-bulbs-upgrade-kit/
did you ever get yours in and if so, how were they?
Henry Recinos any word??
Will LED flasher relay work instead of resistor?
Richard Fisher There is no relay. It is lal solid state, bcm controlled
What about 2017 Ford expedition xlt el thanks
lococho5555, it really depends on whether your Expedition has projectors or reflector headlights. here are the main options for your low beams:
Reflector: headlightrevolution.com/supernova-v-3-led-headlights-h11-h16-bulbs/
Projector: headlightrevolution.com/gtr-lighting-55w-gen-5-pwm-canbus-single-beam-hid-conversion-kit/ - Low beam is a 9005 bulb style
I'd love to talk to you about this, because there's a lot of options for your vehicle that we can go over. give us a call. 218-755-5505.
Will these work on a 2010 ford super duty?
No
Any recommendations on led anti flicker?
Only drivers side flicker and when they stop they aren't the brightest it can be? Help
2013 camry se ?
Alex Nunez sounds like you have a defective brand. The ones we sell don't act like that.
Electrical tape after all . Nice job boy. You’re not touching my truck
To use shrink wrap you would have to cut the wire, we would rather not introduce that into the process.
I think a layer or two of liquid electrical tape would be wise.
What do you expect from somebody who sells LED bulbs at a 500% mark up and swears that his are superior?
@@HeadlightRevolution you can go into configuration and change settings and wouldnt have to cut wires at all and no amount of electrical tape is going to stop water from intruding and causing the wires to have to be repaired anyway so if need be cut the wires add heat shrink and solder much better repair,
All that to replace a bulb, geez, this is why I have not owned ford, gm in decades.
Its a task for sure!