✨Thankfully I found this video after spending several frustrating hours trying to adjust 2 newly installed hinges on a bi-fold kitchen cabinet door. After all my searching, this IS definitely the BEST video! Thank you so much for posting. Your explanations, tips and demonstrations were so clear, concise and easy to follow. I am feeling very accomplished with my DIY, and the door is now positioned perfectly. ✨
I never thought I'd be searching this vid in my young age to fix my cabinets lol. Thank you very much! Now I only need a screw driver. This video made me realized that basic tools are must have in a household
Hey /sheet, yeah for sure, a few basic tools keeps us outa trouble, I do love buying a new tool for every project though = unhealthy obsession 😂 cheers mate, Kent
THANK YOU!! Just installed ikea kallax doors & one wasn’t fully closing, it was popping back open a little bit, took 2 seconds to adjust it after watching this video & now the door is perfectly seated 😊
I've watched so many and each one has left me more confused, best video I've come across so easy to follow! Going to try this again tomorrow for the 10th time, feeling optimistic after watching this
Thanks! I had a door on my IKEA Billy cabinet that wouldn’t shut flush with the other. Watched your video, made the adjustment, and it’s now perfect. Took me maybe 60 seconds, tops! Thanks again!!
Thanks a lot! It really helped me in solving the problem. In this video, every single problem related to the hinges has been covered and solution to the same has been discussed in very simple to understand manner.
Great video. Would like to add that very often if the door is located next to a sink it will often fail to close because of corrosion of the hinge pivot points and spring. Check your other doors and see how much tension they close with. The problem hinges should have about the same amount of force as the others. If they don't, take the door off and spray the the pivot points and springs with wd 40 or electrical contact cleaner. Work the hinges back and forth until they easily snap open and shut. Should be good for another 10 years.
This seems to be my exact problem. Extending the hinges outwards as suggested in the video didn’t do the trick, and the problematic door is beneath the sink. I’ll try this next. Cheers to the both of you. Update edit: Sort of right. When I removed the door to inspect the hinges and flicked them a couple times it turned out a small part was coming loose at one of them, which prevented the shut. I removed the small part and increased the pressure of the upper hinge to compensate and it shuts again.
OMG. Thank you Thank you. What you did at 3.45 minutes is just what I needed to know. Now the cabinet door closes properly. We all needed to know this.
Fantastically helpful video. I would have ripped the door off the cabinet if I had not first watched this video. Door fixed in about 5 minutes! Thanks a lot!
Thank you! I've replaced most every hinge in our cabinets over the years, and always struggle with adjustment because the very brief instructions are in very brief Japanese (I live in Tokyo). With your info I will try to fix the one door that won't close properly -- this is the cabinet where my wife has stored 600 tons of cleaning supplies, and you do not ever want to open this door or you will spend an hour trying to put things back. :-)
Your video sorted out my problem for a bathroom cabinet, and an IKEA cabinet. Thank you so much. The IKEA one now closes properly without scraping on the drawer below it, but is misaligned from that drawer by about 2 mm (giving my OCD a bit of a problem). The adjustments to shift left / right are at their limit. Whatever ... I'll just put it down to a flaw in the manufacture. I feel better if there's something to blame! 😂
All of a sudden today I cannot fully open nor close an upper cabinet door. I will be looking at Adjustment #4, although I already see a lower hinge first horizontal screw sticking way out. Now to figure out which way to turn that screw with the limited opening it is allowing at the moment. Thanks for the helpful video. Hope one of these adjustments work!
Thank you so much for this! I could never figure out how these hinges work. After watching your video, I understand them completely and can adjust them easily.
Just a quick Thank you as I just fixed my cabinet doors with your tips! For “not closing” problem I found turning the middle screw a few more times may load the spring a bit more and it feels “sharp” when closing.
This is a great tutorial! I have a carousel cabinet door that wouldn't close at the bottom but would at the top. Tried to ignore it but couldn't. Although this vid doesn't cover the issue I had, it gave great insight on adjusting hinges to be able to fix it. Thanks for your help 👊
Thanks dude even though I overtightened and fucked up my screws also lost one for the hinges this still was enough to make it work on my first cupboard ! Really easy to understand and well made video that even novices can understand.
EXCELLENT , Thanks. Explained well and slow so don't miss anything and no need to play back and watch.. I am trying to adjustment for Made to measure Storage Cabinet (total 5 screws ) . struggling to do the adjustment
PERFECT! And why? All the close-ups. And thx for the tip of not needing to totally remove the screws/hinges when adjusting a door vertically…..don’t know what I was thinking there. Also, super tip about just going one size up on the screws if the particle board gets stripped! Thx!
Excellent. You have covered every problem most of us have over time. 👍 Good teacher . Clear calm and uncomplicated. I’ve subscribed. Look forward to watching and learning from all your links. Many thanks.
@@InspireDIY Hi, just subscribed your channel, pls can you do a video about how to removed the hinges from being screwed... same this cabinet hinges your using as sample, pls. thank you
Great video - very well explained. But hoping for one that shows how to adjust cabinet doors that are in a corner and have 2 sets of hinges - one between the two doors, and one on the 'wall' of the cupboard. The door remains slightly ajar when closing unless you give it a little push!
Very informative and usefull video. Very nice. I am facing a problem from yesterday wid my wardrobe door. Now its fixed after watched your video. Thanks 👍
@@InspireDIY @Inspire DIY well my cabinet doors would not shut (bounce back). So, that is sorted now thanks to your video. The bonus was I also learned how overcome the problem of screws spinning without tightening. Most people don't know how to deliver information in a concise and clear manner like you do. Hats off to you, sir.
One last question you have been very helpful. I have got everything aligned now. I have one door that opens fine and stays 3/4 open and I have to really push it to close. It is the outer cupboard door of the corner unit. Everything looks linedup and they are Brand new install. Thank you very much!
Hey Jane.. that's strange one, I hope you can understand it's tricky without being there to problem solve - I don't know how much help I can be. If someone in this community has an answer for Jane I'm sure she would appreciate it!
3 months ago was a similar question, the answer turned out to be a bent hinge/bracket. Maybe rule out this as a problem ..you have me scratching my head Jane.
#4 See I messed with those screws and thought it was adjusting something else. You made me take a second look and now my door shuts. Thank you so much! Note: I had to go clockwise. mine 100% was binding and I had shaved a bit off the back to make it work but it still wasnt
Nice work, easy for newbies to understand. It would be awesome if you would do a video to install a door lock and hinges. We manufacture jigs for locks and hinges and it would be great if you would be interested in reviewing. Thanks Jeff
Thank You very much, I have been trying to sort out my wonky doors for ages, one even fell off because I was doing it all wrong. Very clever these hinges aren't they !.
Thank you so much. I have this hinge. I have a corner cabinet the middle door won't close and rubbing against the next door. So my guess is I need to adjust both hinges so the door at the hinge is tighter to the cabinet
Hey Jane, yes you are right, make sure ‘fixing screws’ are tight as these (2) doors can work loose under their weight, and then try adjusting the top hinge that connects first door to cabinet in towards the cabinet a little, and top hinge of 1st door to 2nd door closer together. It’s a little trial and error! Good luck 🤞 Kent
Thanks, enabled me to fix a door. I also need to fix a fridge cupboard door, which has quite different, heavier duty hinges, that don't have the 4-screw system. Any advice, or a video you can point me to?
I like how clear and simple you demonstrate which screws to adjust. Thank you. I'm actually in need of learning how to adjust a "push-to-open" left/right doors above stove. The doors won't grab the magnet anymore and pop back open. Can you help? Or do I need to replace them? Thx 😊
Hey Debbie, it sounds like an adjustment issue doesn’t it.. have a play with the positioning before you replace them (you’ve just given me a great video idea👌) thanks mate🤙Kent
I'd like to see how to adj a cabinet door that has 3 hinges... my issue: The bottom drags \ doesn't clear the threshold, leaving me to lift the door to close. This is the best video for a 2-door hinge scenario.
Great video - Thank you! It was very concise and clear. I am having a hard time getting the cabinet door to raise and lower. I loosened all 4 of the screws but when I try to life the door up to adjust it won't move. Any suggestions?
Hey Kerry, I'm not sure about that one🤷♂️, are the hinges stuck to the cabinet surface (to paint or glue)? maybe gently pry up the hinge with a flat screwdriver once screws are loose and see if they release. Please let me know what you figure out.. no doubt someone else will be having the same trouble too, thanks👍, Kent
@@InspireDIY I still couldn't get the door to close. It sticks out about 4 inches, A freind and handyman I called came over and said the brackets are bent, Bummer.
Hey Seattle, check that the hinge hasn’t been switched off from its soft close feature (if it has it). Otherwise it will need replacing. Best of luck. Kent
![How to fit concealed (Euro-style) hinges for overlay & inset cabinet doors [video # 348]](http://i.ytimg.com/vi/-Y6MEQlFEhQ/mqdefault.jpg)
![How to fit concealed (Euro-style) hinges for overlay & inset cabinet doors [video # 348]](/img/tr.png)
✨Thankfully I found this video after spending several frustrating hours trying to adjust 2 newly installed hinges on a bi-fold kitchen cabinet door.
After all my searching, this IS definitely the BEST video!
Thank you so much for posting. Your explanations, tips and demonstrations were so clear, concise and easy to follow.
I am feeling very accomplished with my DIY, and the door is now positioned perfectly. ✨
That’s awesome Kanksha, well done! …and thanks for letting me know it was helpful 🤙 Kent
I never thought I'd be searching this vid in my young age to fix my cabinets lol. Thank you very much! Now I only need a screw driver. This video made me realized that basic tools are must have in a household
Hey /sheet, yeah for sure, a few basic tools keeps us outa trouble, I do love buying a new tool for every project though = unhealthy obsession 😂 cheers mate, Kent
Wrong hinges
Best video on hinge adjustment so far.
Best hinge adjustment video available!
Hey Fran, that’s very kind of you, thanks for the lovely comment - glad it helped👍Kent
THANK YOU!! I followed your instructions to replace and aligned my kitchen cabinet door hinges successfully. Wifey is happy 😁🤗👍🙏
Well don Ken, thats awesome! thanks for letting me know😉 Kent
THANK YOU!! Just installed ikea kallax doors & one wasn’t fully closing, it was popping back open a little bit, took 2 seconds to adjust it after watching this video & now the door is perfectly seated 😊
Well done Shania, chalk that up to win! cheers, Kent
I've watched so many and each one has left me more confused, best video I've come across so easy to follow! Going to try this again tomorrow for the 10th time, feeling optimistic after watching this
Oh thanks Blank Canvas, that’s a lovely comment to make🤙 best of luck, Kent
Clear and slow speech - not rushed. Excellent.
Thanks for the favorable comment Michael, appreciate it 👍
Thanks! I had a door on my IKEA Billy cabinet that wouldn’t shut flush with the other. Watched your video, made the adjustment, and it’s now perfect. Took me maybe 60 seconds, tops! Thanks again!!
That’s awesome cammi, we’ll done mate🤙 Kent
Thanks a lot!
It really helped me in solving the problem. In this video, every single problem related to the hinges has been covered and solution to the same has been discussed in very simple to understand manner.
I want to add that his voice is quite relaxing and very clear compared to the often hyper type of narrator. Great filming inside the cabinet too. :)
Thanks for the lovely comment Julian, you’re very kind 🤩 Kent
Great video. Would like to add that very often if the door is located next to a sink it will often fail to close because of corrosion of the hinge pivot points and spring. Check your other doors and see how much tension they close with. The problem hinges should have about the same amount of force as the others. If they don't, take the door off and spray the the pivot points and springs with wd 40 or electrical contact cleaner. Work the hinges back and forth until they easily snap open and shut. Should be good for another 10 years.
That’s an awesome tip Vic. Well done mate, thanks for sharing it👌Kent
This seems to be my exact problem. Extending the hinges outwards as suggested in the video didn’t do the trick, and the problematic door is beneath the sink. I’ll try this next. Cheers to the both of you.
Update edit:
Sort of right. When I removed the door to inspect the hinges and flicked them a couple times it turned out a small part was coming loose at one of them, which prevented the shut. I removed the small part and increased the pressure of the upper hinge to compensate and it shuts again.
this is the best video about how to adjust kitchen cabinet doors. It's concise and get the points. thank you!
Thanks Steven, very kind! Kent
40 years old!! New skill learned today… nice one 👌👍
Good on ya John🤙 thanks mate. Kent
Best video on cabinet door adjustment... Straight to the point, clear and comprehensive. Thankyou!!
Hey Rs, that’s very kind of you to say ..thank you🙂 Kent
Thank you ! Simple explanations direct to the point, easy to understand. First video in the search for my problem and I got the right one.
Glad it helped Indrani, thanks for the nice comment 🙂 Kent
Perfect video as I have these issues on 2 kitchen cabinet doors... Thank you for a straightforward explanation!
Well I’m glad it helped you out Paula, well done. Kent
OMG. Thank you Thank you. What you did at 3.45 minutes is just what I needed to know. Now the cabinet door closes properly. We all needed to know this.
Hey that’s awesome, thanks for letting me know GWP, 👍Kent
Fantastic explanation! And so calm! Made me feel like I could do this. Those screws have always baffled. Thanks
Thank you Nanci, lovely comment 😊 cheers, Kent
Brilliant video - so helpful and instructive. Sorted my non-closing hinges in a matter of minutes and got the door straightened
Well done Simon, I’m glad it helped mate 🤙Kent
Fantastically helpful video. I would have ripped the door off the cabinet if I had not first watched this video. Door fixed in about 5 minutes! Thanks a lot!
Good on you Philip👌 I’m glad it helped mate. Kent
Thank you! I've replaced most every hinge in our cabinets over the years, and always struggle with adjustment because the very brief instructions are in very brief Japanese (I live in Tokyo). With your info I will try to fix the one door that won't close properly -- this is the cabinet where my wife has stored 600 tons of cleaning supplies, and you do not ever want to open this door or you will spend an hour trying to put things back. :-)
Good on you Realwmm 🤙 be careful of that cupboard- it sounds too dangerous! Cheers, Kent
Thank you for the clear and concise instructions! Made the adjustments and now my cupboard door is closing. 😊
Glad it helped Melody, add that to your DIY knowledge bank👌. Cheers, Kent
THANKYOU! I was not sure why my cabinet door was not closing fully you saved my sanity!
Sanity still intact, well done mate👍 Kent
Your video sorted out my problem for a bathroom cabinet, and an IKEA cabinet. Thank you so much.
The IKEA one now closes properly without scraping on the drawer below it, but is misaligned from that drawer by about 2 mm (giving my OCD a bit of a problem). The adjustments to shift left / right are at their limit. Whatever ... I'll just put it down to a flaw in the manufacture. I feel better if there's something to blame! 😂
Good on you Michael, well done! (And all the best tradesmen blame their tools too🤙) cheers, Kent
All of a sudden today I cannot fully open nor close an upper cabinet door. I will be looking at Adjustment #4, although I already see a lower hinge first horizontal screw sticking way out. Now to figure out which way to turn that screw with the limited opening it is allowing at the moment. Thanks for the helpful video. Hope one of these adjustments work!
Best of luck GearMaven, let us know how you get on👍 Kent
Thank you so much for this! I could never figure out how these hinges work. After watching your video, I understand them completely and can adjust them easily.
Hey Brdstfff, that’s awesome, I’m glad it helped 🤙 Kent
This was a huge help. Now my cabinet doors finally close properly. Thank you :)
Glad it helped cloudlocke 👌 Kent
Just a quick Thank you as I just fixed my cabinet doors with your tips! For “not closing” problem I found turning the middle screw a few more times may load the spring a bit more and it feels “sharp” when closing.
Well done Upton, cheers, Kent
What a tremendously helpful video - concise and detailed at the same time. Thank you so much.
Thanks for the lovely comment Winip😉 very kind. Kent
Excellent exactly what I needed with a glass door book case I was blanking so I am grateful to find your Video! Cheers!
well done Michelle, hope it goes well. Kent
Useful and I like your calm demeanor.
Thanks Katy, you’re very kind 🙂 Kent
This is a great tutorial! I have a carousel cabinet door that wouldn't close at the bottom but would at the top. Tried to ignore it but couldn't. Although this vid doesn't cover the issue I had, it gave great insight on adjusting hinges to be able to fix it. Thanks for your help 👊
Well done Pigpoggot👌 good on you, Kent
All adjustments necessary, so glad I found this video, thank you!
You’re very welcome Tomas, I’m glad it helped👍 Kent
Thanks dude even though I overtightened and fucked up my screws also lost one for the hinges this still was enough to make it work on my first cupboard ! Really easy to understand and well made video that even novices can understand.
ahh well done Eistee, who needs all the screws right? good on ya mate, Kent
Thank you so much, you solved my problem with kitchen cabinets I had. you are awesome and way of explaining is very professional.
Thanks Naz. Appreciate the lovely comment🤙 Kent
Benefitted enormously from this video. Thanks. You're such an angel, Kent Thomas.
Thanks For the lovely comment Anil👍 Kent
Thank you. Most enlightening and your advice worked. I thought the cabinet needed new soft close hinges.
Glad it helped Derek. Cheers👍Kent
EXCELLENT , Thanks.
Explained well and slow so don't miss anything and no need to play back and watch.. I am trying to adjustment for Made to measure Storage Cabinet (total 5 screws ) . struggling to do the adjustment
Thanks for the feedback senthilonetwo, glad it helped! ..good luck with your kitset cabinet 👍, Kent
It took me a minute to get it but they are all fixed now. Thank you!
That's a win Karen! no-one was timing you, well done mate. Kent
Wow that is amazing. I have been trying to figure this out for years and not until I came here did the answer come. Thanks from the UK.
Well done Rayblondie, glad I could help you out👌 cheers, Kent
Excellent video. Covers what others don't.
Thank you.
Glad it was helpful👍 Kent
PERFECT! And why? All the close-ups. And thx for the tip of not needing to totally remove the screws/hinges when adjusting a door vertically…..don’t know what I was thinking there. Also, super tip about just going one size up on the screws if the particle board gets stripped! Thx!
Lovely comment Twister - thank you. I'm glad it helped mate, Kent
Omg thank you so much for this video. I had a cabinet that hung for years and now I’ve fixed it!!
Hey Andrew, we’ll done mate, and thanks for letting me know it helped🤙Kent
After watching your video is fix one of my cabinets without my husband's help
Thanks a lot
Well done Us 2020 that's great 👍, am glad it helped
Best cabinet hinge video ever...thank you.
I’m a fan of the way you present!
Very kind, thanks mate😉 Kent
Excellent. You have covered every problem most of us have over time. 👍 Good teacher . Clear calm and uncomplicated.
I’ve subscribed. Look forward to watching and learning from all your links. Many thanks.
Thanks for that compliment John, you are very kind to give your time and such a warm review. Good to have you on board👍😊 Kent
@@InspireDIY Hi, just subscribed your channel, pls can you do a video about how to removed the hinges from being screwed... same this cabinet hinges your using as sample, pls. thank you
That was clear and easy. I've got 2 kitchen doors sitting off line, so I now know how to fix them.
That’s awesome Lorraine, thanks for the lovely comment! let us know how you get on🤙 Kent
Thank you So Much…I just finished painting Cabinets and alignment issues when installing them back. Much Thanks I’ve subscribed
Oh good stuff Godfrey, great to have you on board🤙Kent
Great video - very well explained. But hoping for one that shows how to adjust cabinet doors that are in a corner and have 2 sets of hinges - one between the two doors, and one on the 'wall' of the cupboard. The door remains slightly ajar when closing unless you give it a little push!
Hey again Elton😉
Here’s a vid based on corner (2 door) cupboards
ua-cam.com/video/VENK3NBlcYg/v-deo.htmlsi=i6Due66j-budl3Nn
Best of luck mate. Kent
Very informative and usefull video. Very nice. I am facing a problem from yesterday wid my wardrobe door. Now its fixed after watched your video. Thanks 👍
Hey Imsainiuk, that’s great👍I’m glad it helped you out. Kent
I don’t do any kind of fixing or renovating but this helped so much and for that sir you have gained a sub
God stuff Jeremy, great to have you on board👍 Kent
Many thanks for your easy to follow instructions with pictures.
You’re welcome 🤙 Kent
I’m so glad to see this! I really struggle with these hinges and can never get them right. Thanks so much!
Hey that’s awesome Debra, I’m glad this video helped - sometimes a demonstration is all we need.. cheers for letting me know👍Kent
Thank you you're the only person I found to help me.. Mine were wardrobe doors though All fixed and perfect now thank you.❤
That’s awesome, i’m glad it helped you out😉Kent
Clear, easy, and to the point. And that next size up screw tip is a life saver. Many thanks, mate.
Oh that's a great response Nasser, thanks! makes it all worthwhile knowing it helped you out. Good stuff👍 Kent
Am curious.. which hinge adjustment where you searching for/needing??
@@InspireDIY @Inspire DIY well my cabinet doors would not shut (bounce back). So, that is sorted now thanks to your video. The bonus was I also learned how overcome the problem of screws spinning without tightening.
Most people don't know how to deliver information in a concise and clear manner like you do. Hats off to you, sir.
Cheers Nasser. It's all a learning curve for me to, glad it helped - well done mate 👍. Kent
Thank you from Canada, for a simple-to-follow tutorial. 👍
You are very welcome Elizabeth,. I'm glad it helped👍 Kent
Totally repaired my three kitchen closetdoors in minutes!! Thanks!
What a champ you are Jeanette! well done mate 👌Kent
Thanks, you helped me clear in the USA! I appreciated the concise presentation, Thanks.
Thanks for the feedback Christopher, I'm glad it helped you out🤙 Kent
This is the best channel on UA-cam!
One last question you have been very helpful. I have got everything aligned now. I have one door that opens fine and stays 3/4 open and I have to really push it to close. It is the outer cupboard door of the corner unit. Everything looks linedup and they are Brand new install.
Thank you very much!
Hey Jane.. that's strange one, I hope you can understand it's tricky without being there to problem solve - I don't know how much help I can be.
If someone in this community has an answer for Jane I'm sure she would appreciate it!
3 months ago was a similar question, the answer turned out to be a bent hinge/bracket. Maybe rule out this as a problem ..you have me scratching my head Jane.
Hi! Do you know what's the problem and can it be fixed, if my Blum auto-closer stopped working properly and door stops on 3\4 of it's way?
excellent description of hinge adjustments. 👍
Thanks Tom, I hope it helped mate🤙 Kent
#4 See I messed with those screws and thought it was adjusting something else. You made me take a second look and now my door shuts. Thank you so much!
Note: I had to go clockwise. mine 100% was binding and I had shaved a bit off the back to make it work but it still wasnt
Well done dosmastrify 🤙nailed it! Or screwed it I should say🙄 Kent
Perfect. Clear and concise description and demonstration. No messing about. Subscribed!
Thanks Sharp Cheddar🤙 great to have you join me mate, Kent
Nice work, easy for newbies to understand. It would be awesome if you would do a video to install a door lock and hinges. We manufacture jigs for locks and hinges and it would be great if you would be interested in reviewing. Thanks
Jeff
Hi Jeff, thanks for reaching out 👍
Please email me at: inspirediyemail@gmail.com
Cheers, Kent
@@InspireDIY Thanks Kent, email sent
Thank You very much, I have been trying to sort out my wonky doors for ages, one even fell off because I was doing it all wrong. Very clever these hinges aren't they !.
Hey Foster rose, you’re right, they are a clever piece of engineering. Thanks for the nice comment 👍 Kent
Just used this to fix an under-sink storage cabinet I bought! I’m new to DIY so this was such a great video to teach me some tips!! Thank you
You are very welcome Liam, Thanks for the comment and good luck with your project 👍 Kent
Excellent - properly adjusted all my kitchen cabinet doors - thanks!
That's awesome Shirley, thanks for the comment, I'm glad it helped! 👍Kent
Thanks for posting a simple straight forward guide.
You are very welcome David, which adjustment did you use?? Kent
Thank you so much. I have this hinge. I have a corner cabinet the middle door won't close and rubbing against the next door. So my guess is I need to adjust both hinges so the door at the hinge is tighter to the cabinet
Hey Jane, yes you are right, make sure ‘fixing screws’ are tight as these (2) doors can work loose under their weight, and then try adjusting the top hinge that connects first door to cabinet in towards the cabinet a little, and top hinge of 1st door to 2nd door closer together. It’s a little trial and error! Good luck 🤞 Kent
This worked perfectly
Thank you. This video helped me to adjust my ktichen cabinet door that would not close
Well done Aida, I’m glad it helped mate🤙 Kent
Thanks, enabled me to fix a door. I also need to fix a fridge cupboard door, which has quite different, heavier duty hinges, that don't have the 4-screw system. Any advice, or a video you can point me to?
Hey Steve, That’s not something I’ve ever tackled so I can’t share any knowledge on it💁🏻♂️if you find a good video on it let us all know 👍Kent
Thanks a lot for explaining in very easy steps.
you are most welcome, Kent
Thanks! This video was helpful! Now I have a good idea on what I need to do. It also helps that you're easy on the eyes when watching the video!
Thanks furrdog31, I'm glad it helped 👍 Kent
Excellent video thank you. Clear explanations for each type of adjustment, spot on!
Cheers Warren, lovely comment mate - thanks🤙 Kent
I like how clear and simple you demonstrate which screws to adjust. Thank you. I'm actually in need of learning how to adjust a "push-to-open" left/right doors above stove. The doors won't grab the magnet anymore and pop back open. Can you help? Or do I need to replace them? Thx 😊
Hey Debbie, it sounds like an adjustment issue doesn’t it.. have a play with the positioning before you replace them (you’ve just given me a great video idea👌) thanks mate🤙Kent
@@InspireDIY Thank you, I'll try to adjust it. Looking forward to that video. I subscribed. 👍
This was well articulated! Thank you my guy!
Cheers funkmaster🤙
I'd like to see how to adj a cabinet door that has 3 hinges... my issue: The bottom drags \ doesn't clear the threshold, leaving me to lift the door to close. This is the best video for a 2-door hinge scenario.
Hey mate, yeah I have a door with 4 …it’s a lot more time and effort with more than 2 hinges hey! Best of luck, Kent
That's the best explaination yet. Thank you.
Thanks so much for the nice comment Lorna, I appreciate it. 👍 Kent
Thank you! This saved my ikea kallax doors!!!
Oh that’s awesome Danni, thanks for letting us know👍 Kent
Thank you for explaining it very clearly
You’re welcome Nancy👍 cheers, Kent
another great video- perfectly explained and demonstrated!
Thanks Christopher, that’s very kind mate🤙 appreciate it. Kent
Great video - Thank you! It was very concise and clear. I am having a hard time getting the cabinet door to raise and lower. I loosened all 4 of the screws but when I try to life the door up to adjust it won't move. Any suggestions?
Hey Kerry, I'm not sure about that one🤷♂️, are the hinges stuck to the cabinet surface (to paint or glue)? maybe gently pry up the hinge with a flat screwdriver once screws are loose and see if they release. Please let me know what you figure out.. no doubt someone else will be having the same trouble too, thanks👍, Kent
Thanks so much. I was stumped with #4.
Hey Tinchote, that’s cool… glad it helped👍Kent
Thank you so much, my doors don’t close and you have explained what to do beautifully
Thanks for that feedback Ana.. I'm glad it helped 👍 Kent
Thank you very much for taking the time to plan and make this video.
You are welcome Marty, thanks for the comment, I hope the video helped. Kent
@@InspireDIY I still couldn't get the door to close. It sticks out about 4 inches, A freind and handyman I called came over and said the brackets are bent, Bummer.
A perfect video- clear concise- job done ! Thanks!
Hey John, very kind words mate, thanks for commenting. 👍Kent
Simple, clear explanation and demo. Thank you 👍😊
You're welcome Tamilarasan, I'm glad it helped 👍 Kent
Hey thanks brother, what a great video! I loved how you went through every possible scenario, step by step. Subscribed for future fixing! Kind regards
What a lovely comment, you’re very kind 🙂Kent
Thanks for the vdo, what is the middle screw for on the hinge?
Hey Marco, the middle screw is to move the hinge laterally, so the door would move left or right within the cabinet space. best of luck, Kent
@@InspireDIY thanks Kent!
Dude saved my life. 100 sec or 100$
Cheers Elliott, I'm glad it helped you out👌 Kent
great job. going to try some adjusting this wknd.
Good on you Jan, let us know how you get on👍 Kent
Very useful information and clearly presented. Thanks for the video.
You are welcome Michael. Thanks for leaving a lovely comment 👍 Kent
Thanks. That was an easy fix (now that you've shown the "how-to")
Thanks Douglas, good to know it’s helping someone out! Well done mate🤙 Kent
worked first time! Thank you
Well done scott🤙 good job
This video solved my problem. Thank you
That's awesome, cheers for letting me know Andrew, Kent
Hi, can we adjust / fix the soft closing hinge? One cabinet of mine not slowly and softly closes like other hinges.
Thank you for your help.
Hey Seattle, check that the hinge hasn’t been switched off from its soft close feature (if it has it). Otherwise it will need replacing. Best of luck. Kent
@@InspireDIY
I will replace it. Thank you.
well that was a lot easier than I thought it would be, cheers nice one
Hey you're welcome Andrew, glad it helped mate👍 Kent