HOW TO START USING FUSION - Your First Day in the Fusion Page of DaVinci Resolve!
Вставка
- Опубліковано 6 вер 2024
- Fusion Survival Guide: Fusion Survival Guide: www.groundcont...
FREE Fusion Mini Course: www.groundcont...
The 9 Nodes You Need to Make (Almost) Anything in Fusion: www.groundcont...
-
FUSION: ZERO TO HERO - The Ultimate Blackmagic Fusion Course (Great for Beginners!)
- Learn to make motion graphics and visual effects in DaVinci Resolve!
www.groundcont...
-MORE RESOLVE COURSES-
Pro Compositing & VFX in Fusion Course:
www.groundcont...
-----------------------------------------------------------------------------------------------------------------------------------
Want some great Music/SFX? Check out Audiio for some amazing royalty free assets:
Use code Casey70 for 70% off at Audiio: www.audiio.com...
-----------------------------------------------------------------------------------------------------------------------------------
Lighting provided by GODOX
-----------------------------------------------------------------------------------------------------------------------------------
So you're ready to learn how to use Fusion in DaVinci Resolve? This is the perfect video to help you get started and learn some of the basics. I'll teach you about some of the most important nodes in Fusion and what the heck even a Node is!
Continue the discussion on our SubReddit: / caseyfarisgc
#GroundControl #DavinciResolve #DavinciResolve18
Check out the FREE 9 Nodes course: www.groundcontrol.film/9-nodes-workshop
Enough with the first day in Fusion videos, we'd need a last day in Fusion video.
Hilarious
I’m New to resolve. Coming from FCP
Tried fusion , knew enough to be dangerous , and now I am trapped and lost inside the spline tracker editor. I can’t find my way out and am scared I will die inside here before I find my way out ;)
I got trapped in here , when I was clicking those funny looking locks. I was clicking and swiping and scroll wheelin trying to fix a bad one that flipped my image for some reason only on one lock. But then when I figured out how to delete the one lock, I FELL THRU THIS CRAZY HOLE , and every lock flipped the image over then these crazy monster green squares appeared and ATTACKED me, and now I’m am constantly falling , like I’m in a BLACKHOLE, and I can’t find my way out, everything is spinning , twirling , all squiirrrllly.
HEEEELLLLPPPP
If only there was a TUTORIAL, that would tell me EVERYTHING , specifically about all these tracker locks, and how I can just delete ONE of them so my track just continues, to the other good one, and AND HOW to properly connect 2 seperate tracks on the SAME clip, without the video suddenly JUMPING when it gets to the 2nd tracker in the middle of the clip.
Boy I might actually PAY for training like that 😂
.
You are the G.O.A.T of editing video tutorials
Casey, I was always taught that the measure of understanding is the ability to translate the complex to a simple explanation so the average ‘layman’ understands, and you have just proven, once again, you are at the top of the tree in this ability - great stuff 👍
Hey Casey, hope you will explain every single node in detail. That would be great for many people like me to understand better. Thanks again for what you are doing.
Your videos are the AWESOME. I´m new to editing and I watched a lot of tutorials. But I always end up on your tutorials because yours are simply the best..Thank you
You're very kind. Thanks!
You have developed a very concise form of teaching and communication, Casey
Casey, you have been my Davinci Guru for the past three years, thank you so much
you are a really good teacher and speaker, Casey. thanks for leading and a lot of us through our video editing journey.
Your videos are amazing, thank you!!!
Really great that you continue to demystify Fusion and bring it to the masses. Nicely done.
To my question below, after spending hours wrestling with this damned thing I discovered that under playback, changing my proxy resolution to full fixed the problem. Something to watch out for as it is non obvious. Please ignore my post below and keep the great videos coming!
Thanks so so much for your help. Amazingly generous for you to teach us.
THANKS
My UA-cam Professor of choice...thanks again Casey!
Just what I needed
Long time viewer and still learning!
every time i hit track to end, i get an alert saying "track failed pattern pologon must be closed. How do i do that
Thanks. Really good tutorial.
Do you maybe have a tip for lagging Audio? I can't bearly cut 😢
Hey Casey. you videos on fusion are great in getting us up the learning curve. Very daunting otherwise Much appreciated! I have run into a really bizarre issue though. I have a map that I have turned into a .jpg through Canva (added some stuff on the way and then animated it using paint in fusion. Great! Did this a month ago. Originally it all worked. However now the mere act of going into fusion corrupts the original map image - turns it into very low resolution. This all worked before. I don't understand what is causing this. I have tried to recreate by reimporting the map image which looks fine until i go into Fusion and then bam! corrupted image. Do you have any idea what could cause this? Many Thanks!
Oh boy. Not sure on that. Update your OS, update Resolve, and update GFX drivers. That will fix things like this sometimes.
How about a video for people with lots of Fusion tab experience in Resolve but have never opened Fusion the separate app. Why would you want to do that? What are the benefits or are there?
How the heck do I set the reference points in the tracker??? No straight lines???
thanks for this tutorial !
Making it look easy :)
Honestly, all these silly little nodes always made more sense to me than anything in After Effects ever did. The system is pretty intuitive when you get the basics down
I thank you very much for what you’re doing to help people. Are use this program… Davinci resolve in my daily work. I make very short videos to communicate with my coworkers. BTW, my system will crash when I’m using fusion. I have 16 GB of RAM. I guess I should bump it up to 32. Anyway… If you’d like to do a program about the hardware needed to use this program That would be so beneficial. THANK YOU CASEY FOR SHARING YOUR KNOWLEDGE!
Can you teach us to do some VFX? Lasers. Spaceships. Blood. More tuff like that.
Hey Casey, is there way I can learn from you? The way you break things down is scary. It makes me wonder if you were part of the team that created Davinci resolve? How do you know so much? I want to learn 😪😪😪😭😭😭😭 sifu.
Get the fusion survival guide, step 1!
Awesome!!!
That was very helpful. One of the things I have been giving some thought to is wondering if my computer really has enough horsepower to effectively run DR Studio. I am using a Windows based system. It has an AMD Ryzen 5 six-core processer and an AMD Radeon R9 Fury series GPU, I notice that there is a great deal of stuttering and hesitation when trying to scrub back and forth on the Fusion page, and using Magic Mask takes an eternity. Usually, I start Magic Mask before I leave the house to run errands or before I go to bed. When I get back to the computer in a few hours it will have done a perfect job.
Given this, what do you think my minimum budget-friendly upgrade should be? Thanks.
Decent GPU and ideally an nVidia one would be my priority, as studio takes advantage of it for neural engine tasks (like magic mask). Also at least 32GB of RAM.
Presentation Idea: at about 5:10 you go into describing the nodes. I've seen a few of your videos where you're getting this point across. Here's a minor tweak of an idea to what you're already doing: Choose some simple work you think is easy to get across to the audience, as you do. I'm thinking show that in three steps...
...step 1: only show the viewer. Something like "This is the original video and what we'll be doing is adding this effect. Then show video + effect. (Basically no interface yet, just video).
...step 2: then, as you do, talk about a fusion effect being a series of steps. But in this you present each thing you're doing as a bullet point, like hand written on a piece of paper. Maybe show that in the "left viewer" and the fusion-y video on the right side. Something like "I'll explain this more fully when we get to the real thing but here I want to get across the fusion nodes (that you'll see in a minute) are just a series of steps like a bullet list. First bullet is the original composition, last bullet is the finished product. And any bullets we add in the middle are to change this (first bullet) into this (last bullet)." Then you quickly run through a short list of half a dozen things that will build what you want - as bullet points.
...step 3: "Now lets convert that bullet point, step by step process into fusion-talk, into nodes. Our first bullet point was...(this)...and here's the node for that... blah blah blah, yadda, yadda, yadda...bob's your uncle.
Words. Takes so many words to say a simple thought that occurred to me while I was watching your video. Not suggesting you 'should' do this - only it was a thought, now its shared, now you can do whatever the heck you want with it. Bazzing! Cheerios!
Do more on DaVinci
Help! I get the "nodes"... they are great; and I've created huge "trees" of nodes! But why can't I first create 4 or 5 layers in the timeline, then switch to Fusion and have those 5 layers show up as "mediaIn" nodes to composite together with node effects? Apparently, you can only take one clip from the timeline into Fusion at a time. That's great if you are adding a bunch of effects to one clip, but what if you have a moving video wall of 4 monitors and want to fill (track) each monitor with individual moving sources, each with their own "look" (focus, TV noise, etc)? I get that you can drag additional clips into Fusion after you start, but they won't be in the sync that you've first chosen in the timeline. Back in the day (I'm old), Avid DS used nodes and timelines together... as many clips as you wanted, perfectly timed and adjustable, right next to the nodes window (also, those nodes could have separate video and alpha paths... very powerful). Also, I saw your gun and smoke demo, but that's too time consuming to add 4 clips and trim, trim, trim until you get it right. Trimming on the timeline is so much better, even if you have to do it before entering Fusion. Please help... this is stopping me from switching from Premier/After effect.
Select all those layers in the timeline... Right click and create fusion clip. Then go to fusion.
@@CaseyFaris OMG! you are the only person who knew this. Thank you.
nice!
Thanks Casey for this intro. Quick question is there a way to add notes to a fusion comp? I save settings and I'd like to add a few notes so when I try to use it I remember some of the key adjustments or how it needs to be patched before seeing the result.
Search for Sticky Note.
Yup! Add a sticky note! It's in the layout category I think
@@CaseyFaris Yes! It's in the Tools / Flow thanks Casey!
have variety of footage which have different aspect ratio from old tape like VHS,DVCAM,Mini DV,HDV and also FHD footage. when we import these footage then by default all clips have same aspect ratio of sqare 1:1 but i want original aspect ratio. In other software like premiere pro when we import clips then it maintain original aspect ratio of original clips but here all the clips have 1:1 aspect ratio. Here from clip attribute we can change aspect ratio but having 200 to 800 clips in a project , it is not possible to do . Is any setting or any solution to solve this in davinci resolve.
In your timeline settings, maybe play with your scaling settings, that will do things like zoom the image to fill the screen for all the clips etc.
First Comment! Thanks for your videos❤
Honor to be the first one to comment that: Great video as usual
I begin to understand as long as I run the video at 75% speed.