how to fix a whale high flow and premium pump water leak

How to fix a water leak on a whale water high flow pump and premium pump.
Firstly, with a Phillips 2 or Pz 2 size screw driver, remove the 2 screws in the head of the pump and place to one side.
Seperate the head of the pump into 2 pieces by pulling back and also pull back on the white ribbed section aswell.
Pull the blue water pipe off of the white tube section on the head of the pump. This will be glued in place from factory.
The last inch of blue pipe that attached to the head of the pump will likely look swollen compared to the rest so cut this off as well as the blue piping that goes around the electrical wiring (don't cut the wiring itself).
Dry away any water residue, add fresh super glue to the white pip section on the water pump head.
Slide the blow water pipe back into place.
Slide the white ribbed section back into place.
Rejoin the head of the pump back together and rescrew the 2 screws into the head of the pump.
leave the pump to stand for 30minutes to allow the glue to dry, then you'll be free to use the pump again.