The man shows you how to make a perfect 45 degree tube cut with a small hand grinder!! And there are no 45 degree adjustments on a small hand grinder… you of all people with an advance technical annotation on this one should know that… Holland is waving… 😁!!
So many people on here talking about a chop saw on a 45° is so much easier. That's true. But when you don't have that luxury item, this is great to know. Let's see some other videos on how it's done with just a trisquare. I'd love to be educated. Nice job using geometry to get this done. Love it.
You are sadly mistaken. If you watch closely his method fails and he jump cuts to him connecting the pip with 45 degree cuts on them. Look closely when he’s marking and cutting with the grinder.
@@Joshb52 I'm not seeing the failure that you're talking about. Some coworkers and I have tried this method since first watching the video and it actually does work. This method actually does give you the miter angle needed to make a 90° angle on tubing
THIS is the right comment... Seems like everyone who comments on this this guy's vids assumes he has access to thousands of dollars of high-end equipment and courses on advanced welding techniques. Not everyone in the world can afford a miter saw and an 8 thousand dollar welder, yet somehow the job still needs to get done. His videos are excellent for hobby welders.
This is really good for when your not in the shop with that chop saw or band saw like the comment below stated, sometimes all you hot is the basics and instead of the several thousand dollar piece of equipment all you got is your brain ...good job
If you’re building a refinery, power plant or chemical plant this is how you do it. This is how you would actually do it in the field. On a job site you’ll only have access to a metabo, band saw or sawzall. Good job that’s how a journeyman would do it.
Thanks for the tip! I would have never thought of it. This idea comes from a lot of experience. It’s not about using a saw to cut at 45 degree. Use this concept for other uses.
I think a lot of people cut these to use them for picture frames and for arts and crafts. It has a nice rustic look. But yeah, elbows for industrial uses
…….and industrial stairwell railings and such as these. I’ve seen stainless steel railings that are sculptural without any joints. This is odd though when a miter saw is all that would be needed.
This guy is the teacher that used to say "Yes, putting your saw to 45 degrees does also work, and its way faster, but you didnt do it like i said you should so i deducted 3 points"
That was not the basics of anything. there is literally a better faster and accurate ways to do it. But i mean we’ll give him props for finding out a way to do it..
@@danielfausto757 that really is the "right way" to do it. Any other way (i.e. a chop saw on a 45, or "trying" to use a speed square) is just a shortcut. If you don't have any of those "luxury" items on a job, and need it to be right and precise....this is how you get the best results. And the fact that they did it on little 1 1/2" tubing (or whatever it is) is moot. If it has to be done on 8" pipe, try putting that in a chop saw. It work work out so well
Cold cut saws are thousands of dollars, the blades are upwords of $200. You're thinking of an abrasive chop saw, which are trash imo. Especially low end ones that always have a shit vise.
Got to admire that you fitted this in a short, This is good if we were living in 1923 but technology has advanced since that era. I still can't think of a more long winded way of doing this, I think you nailed it.
Understanding the fundamentals is important. To all the haters out there this is what separates the hacks from the skilled workers. Actually knowing what your doing and how to do it. This is taught in all union classrooms. The basics from the ground up.
Even easier is to drill a wood block with a hole saw, then cut a 45 on the wood block. It's a perfect template for as many of these you need to cut. Grinder, Sawzall, hack saw, what ever you happen to have
Todo el aplaste es o espr q mno nada pienc elmejor Lucio superior incrsta alos hijas . Mentlment y estn l dej favr sin arrepentimiento terminan tod violadas. Olvidnd Jesucristo . Lucio no tiene miedo q l violen por eso a violad diferente familia Lucio me vio cund tenía 16añozbuscando alos bien dbien ma de l los desleales ddesfe profetiza contraria a la norm Katyri pone venesolano en l voz tus hijas para rendar ganarhumida pralos vensolsnos yniestr humilddonde se eleva Lucio no tiene miedo q l violen por eso a violad diferente familia Lucio me vio cund tenía 16añozbuscando alos bien dbien ma de l los desleales ddesfe profetiza contraria anormhuma vert Chui
Один раз сделай на углу верстака разметку на 45° и по нему на глаз делай пропилы до более середины трубы, после перевернул и ориентируясь по пропилам завершил рез. После можно подравнять и (или) залить соединение сваркой.
I guess in a third world country where it might be hard to get a cut off saw that has 45 degree adjustments on it. This would be the way you would do it. They say necessity is the Mother of invention. Well done. 👍
No, if you can't afford a try Square for under $10, then you're doing something wrong they also make miter tools that clamp around the pipe for a 45 degree angle have with you if you know you're going to need to cut a 45 degree angle at anytime you'll have this stuff with you no this is a mockery of intelligent people who know how to do the job it's stupidity and a waste of time.
@@davidrayy9079 if you already know how to do this stuff, then the video wasn't made for you. And some of us work under a contract that says we don't bring personal tools to a job (i.e. a $10 trisquare)
Когда то давно, мой папа рассказывал, как отрезаАл трубу. Он ее опускал в воду под нужным углом, оставалась мокрая метка, по ней и резал. Работал кровельщиком в Ленинграде после войны, два класса образования.
It's much easier than this lengthy procedure. You just mark a line with the same length as the diameter. Connect it to the opposite tip and then you will get a protected line with 45°. Cut it and enjoy!
As a welder/fabricator, only time I do this method is when shrooms are introduced and I want to be of the up most precise. I'd laugh at you in my shop if you did this 😂
For those of you missing the point this is for those of you who don’t have the tools to just cut a 45° as of the rest of us we know we got the tools to do this same thing easy so why y’all gotta diss I bet at least one person found this video helpful
Or, you know, just adjust your metal-cutting saw to 45 degrees, and cut both pieces in like 15 seconds total.
If you have one;)
Просто отрезать болгаркой 45° не получится. А специальная пила не у каждого есть.
The man shows you how to make a perfect 45 degree tube cut with a small hand grinder!! And there are no 45 degree adjustments on a small hand grinder… you of all people with an advance technical annotation on this one should know that… Holland is waving… 😁!!
Are you a bot, or just silly? He is obviously referring to a miter saw, or "chop saw". @@ZEUS-eg8jw
Lmao
So many people on here talking about a chop saw on a 45° is so much easier. That's true. But when you don't have that luxury item, this is great to know. Let's see some other videos on how it's done with just a trisquare. I'd love to be educated. Nice job using geometry to get this done. Love it.
You are sadly mistaken. If you watch closely his method fails and he jump cuts to him connecting the pip with 45 degree cuts on them.
Look closely when he’s marking and cutting with the grinder.
@@Joshb52 I'm not seeing the failure that you're talking about. Some coworkers and I have tried this method since first watching the video and it actually does work. This method actually does give you the miter angle needed to make a 90° angle on tubing
THIS is the right comment... Seems like everyone who comments on this this guy's vids assumes he has access to thousands of dollars of high-end equipment and courses on advanced welding techniques. Not everyone in the world can afford a miter saw and an 8 thousand dollar welder, yet somehow the job still needs to get done. His videos are excellent for hobby welders.
@@Joshb52
Your sadly mistaken bro. I witnessed skill and intelligence
This is really good for when your not in the shop with that chop saw or band saw like the comment below stated, sometimes all you hot is the basics and instead of the several thousand dollar piece of equipment all you got is your brain ...good job
He's making an easy thing so hard . I've had teacher like that 😭
Exércicio ⁉️🤔🤔🙄🙄👀👀🤔🤔⚠️
Y TU QUÉ HAS APORTADO? SEGÚN TU MUY INTELIGENTE Y NO LO DEMUESTRAS, ERES PURA LENGUA SUELTA.🤔🧠🤦
How? 😊
On something like tubing that small yes but if the tubing is 3 foot in diameter this method helps
just BS!!...you are sisi...
Must be paid by the hour!! That's the most complicated way of putting a 45 on a piece of pipe I've ever seen. Well done!!😂
Union guy.
Oh by all means show us an easier way without a bandsaw or drop saw
Grinder, metal cutting saw, hell a Sawzall! Anything faster than that!!
Hunter Biden is now a professor. He makes millions per episode. Smartest man I know!
@@micahap1559 why act like such a child? that crap has no place here. grow up.
And in his next video he will demonstrate the proper technique for reaching over your shoulder to scratch your ass....
😂🤣😂🤣🤣🤣
Ja, ja ja ja 😂😂😂
😂😂😂😂😂😂😂BRUHHHHHH😂😂😂😂😂
LMAO 🤣. Thanks for the laughs.
If you’re building a refinery, power plant or chemical plant this is how you do it. This is how you would actually do it in the field. On a job site you’ll only have access to a metabo, band saw or sawzall. Good job that’s how a journeyman would do it.
An experienced welder would have pipe wraps. I used them quite regularly.
Exactly what i was going to say. A Wizard Wrap would be far easier.
What’s a pipe wrap?
@@HJZ75driver A pipe wrap is like a fancy flexible ruler for pipes
A pipe fitter, yeah, but I welded for years without seeing one. Never really had the need until I was fabbing up some stuff that used 6" pipe.
And people said geometry was a useless class… people just dont understand how important math is
This is a great mathematical demonstration of a sine wave. I love it.
That’s how my brother did IT!!! He had round templates that fit the ends of all his rnd stock in the shop. Thanks for the Vid!!! 👍
Thanks for the tip! I would have never thought of it. This idea comes from a lot of experience. It’s not about using a saw to cut at 45 degree. Use this concept for other uses.
90deg elbow has left the chat
Yeah because no person would like to make 2welds instead of one🫣
I think a lot of people cut these to use them for picture frames and for arts and crafts. It has a nice rustic look.
But yeah, elbows for industrial uses
…….and industrial stairwell railings and such as these. I’ve seen stainless steel railings that are sculptural without any joints. This is odd though when a miter saw is all that would be needed.
My sentiments exactly!
This is a brilliant example of how a simple thing can be done in a complicated way
This guy is the teacher that used to say
"Yes, putting your saw to 45 degrees does also work, and its way faster, but you didnt do it like i said you should so i deducted 3 points"
Just use that magnetic square to mark the 45 degree
В том -то и фокус.Как без уголка,только с каким нибудь листом и чертилкой это сделать.Тут хорошее знание тригонометрии.
That takes a good eye.
Also, this technique displays the basics of how to do SO MANY real life applications for the math of curves.
That was not the basics of anything. there is literally a better faster and accurate ways to do it. But i mean we’ll give him props for finding out a way to do it..
@@danielfausto757 that really is the "right way" to do it. Any other way (i.e. a chop saw on a 45, or "trying" to use a speed square) is just a shortcut. If you don't have any of those "luxury" items on a job, and need it to be right and precise....this is how you get the best results. And the fact that they did it on little 1 1/2" tubing (or whatever it is) is moot. If it has to be done on 8" pipe, try putting that in a chop saw. It work work out so well
I suppose that is 1 way, or you could just set your cold saw to 45 degrees and cut it!
it depends if you have access to such tools remember he shows you how to do it if you only have basic tools available🤷♂️
@@gembaasg Harbor Freight if you can't afford a Dewalt. Chicago Electric do just fine. They're like $100. Pays for itself in a single afternoon.
@@gembaasgHello. You can cut it by hand with a metal cutting saw blade.😂
Cold cut saws are thousands of dollars, the blades are upwords of $200. You're thinking of an abrasive chop saw, which are trash imo. Especially low end ones that always have a shit vise.
What if he doesn't have one?
Got to admire that you fitted this in a short,
This is good if we were living in 1923 but technology has advanced since that era. I still can't think of a more long winded way of doing this, I think you nailed it.
I use a metal miter saw set at 45 degrees. works pretty good.
The worst part about it is...we're all watching it and making him money 😂
He made like $1.75 on this video if he’s lucky lol
😂😂😂😂😂
We're making a money but it's still satisfying to watch
At least he will get new pair of gloves
Oh god it took many seconds of your valuable life?
Cleaver job . Nice 45 Degrees
Shame the cut's about as straight as I am. (hint, I ain't).
These are the kind of guys you don't pay by the hour
Or u do.
Easy money making something look so difficult and taking so long to make😂
Exactly.
Это точно! На почасовой оплате этот товарищ купил бы себе пилу.
Damn right.
Why not? You just saw!!! I did this in under a minute!!! Lol 😅😅😅
Understanding the fundamentals is important. To all the haters out there this is what separates the hacks from the skilled workers. Actually knowing what your doing and how to do it. This is taught in all union classrooms. The basics from the ground up.
Couldn't have said it better
From a purely geometric perspective that was acutely enjoyable.
Life is rosy when you have a mitre saw but if you havent got one this is something to try.
Or, notice he has a 45 degree angle guide with that red lineup guide? Duh!
You: OK, I have the pipe cut
Me: I already built the whole damn railing and finishing my second beer
The finger wag made me think this was going to fail, but I'm impressed.
Wow that was pretty slick
Great skill to know honestly 👍🏾
also Men's Warehouse is rebranding themselves as
Non-Binary Suit Storage
Yeah, I think it would be easier. To just go mark it on a 45 and just cut it.
Good example of needing a chop saw. But if all you have is a angle grinder it works.
Even easier is to drill a wood block with a hole saw, then cut a 45 on the wood block. It's a perfect template for as many of these you need to cut. Grinder, Sawzall, hack saw, what ever you happen to have
Todo el aplaste es o espr q mno nada pienc elmejor
Lucio superior incrsta alos hijas . Mentlment y estn l dej favr sin arrepentimiento terminan tod violadas. Olvidnd Jesucristo
.
Lucio no tiene miedo q l violen por eso a violad diferente familia
Lucio me vio cund tenía 16añozbuscando alos bien dbien ma de l los desleales ddesfe profetiza contraria a la norm
Katyri pone venesolano en l voz tus hijas para rendar ganarhumida pralos vensolsnos yniestr humilddonde se eleva
Lucio no tiene miedo q l violen por eso a violad diferente familia Lucio me vio cund tenía 16añozbuscando alos bien dbien ma de l los desleales ddesfe profetiza contraria anormhuma vert Chui
Один раз сделай на углу верстака разметку на 45° и по нему на глаз делай пропилы до более середины трубы, после перевернул и ориентируясь по пропилам завершил рез. После можно подравнять и (или) залить соединение сваркой.
Learn this as a mechanical insulator. Good video straight to point
The magic of the internet. Keep doing it as many times until everything matches up straight and then edit it, so it's perfect.
Вот кому пригодилась геометрия после школы)))
I guess in a third world country where it might be hard to get a cut off saw that has 45 degree adjustments on it.
This would be the way you would do it.
They say necessity is the Mother of invention.
Well done. 👍
Just amazing!!
Basic pipe fitting technique, do you want a medal?
This definitely helps when you're out on a job that does have those nice chop saws that you can set on a 45° angle
No, if you can't afford a try Square for under $10, then you're doing something wrong they also make miter tools that clamp around the pipe for a 45 degree angle have with you if you know you're going to need to cut a 45 degree angle at anytime you'll have this stuff with you no this is a mockery of intelligent people who know how to do the job it's stupidity and a waste of time.
@@davidrayy9079 if you already know how to do this stuff, then the video wasn't made for you. And some of us work under a contract that says we don't bring personal tools to a job (i.e. a $10 trisquare)
Right there in his hand was a 45 degree magnet. Scribe your line and cut. Wow.
@@rusted5408 I don't know where you saw a 45° magnet. Looked like a 90° to me
@@grantmontgomery9955 Valid point. Can disagree.
Step 1, go to shed grab old wood cutting miter saw.
Step 2 buy a Diablo metal cutting blade.
Step3 cut whatever you want.
Works great on wood too.
LITERALLY🤣🤦♂️
Until you're in the middle of Donbas trying to repair the tanks that Comrade Putin had your unit drive across the minefield
Holy crap! An actual hack that actually works! Awesome! Most of them are beyond dumb. New subscriber here!
I remember cutting pipes in 45 with a L angle cut at 45, put both in a vice grip and cut
As simple as that
I just make a 45 degree cut
Yes genius, not everybody has all the right tools. That's the purpose of the video, to show alternative methods of doing it without the fancy tools
So you have a welder but not a $75 chop saw. Who is the dumbass now?
@@Pyxe_ZA for those who has the angler and by the fucking mysterious reason has no hacksaw?
Perfect cut without costly equipment ...
Pretty darn cool!
Gracias por compartir sus conocimientos y videos
Eso ... Bien explicado ,buen trabajo
Experience wise plus common sense. Well done bro.🎉
Best video sharing tq
А я как дурак, маятниковой ленточной пиле выставляю угол и пилю.
Но идея хорошая автор, когда нет возможности отпилить пойдет и такая идея.
Проще готовый сантехнический уголок приварить, чем угол ровно отпиливать.
Love it. I remembered this method of circle drawing once and forever, pretty cool tbh 👍
I love the comments section on anything from the labor industry
They make a tool for that Mercer Industries 730030 Pipe Marking & Cutting
I need that lol
They do but they are for each different pipe size. Not one tool for many sizes.
@@davidward5607 eh... still would come in handy ngl. Rather than angle grinding a random pipe and finding out that half of it ain't 45° 🥴
Good job...👍👍
Has it got to be that sophisticated??damn.
He’s the kind of guy they send to the shop to buy some sparks to fill the spark plugs.
Miter saw?
45 graus + 45 graus.
A to the Man
That was pretty slick
Wow...is very a good idea. Thanks
Very nice 👍
Dude never had a chop saw that pivots
Think you meam mtre saw .
@@fishfire_2999 It's the same thing. Miter saw and chop saw are two names for the same tool. Tradespeople call them chop saws.
Muito top, show. Muito obriga de compartilhar seus conhecimentos. NOTA: 100
That's kind of insane and awesome all at the same time
That's pretty cool technically Way of fitting pipe very good job.
Muy bueno y práctico. Gracias
Exelente.
Gracias maestro
Когда то давно, мой папа рассказывал, как отрезаАл трубу. Он ее опускал в воду под нужным углом, оставалась мокрая метка, по ней и резал. Работал кровельщиком в Ленинграде после войны, два класса образования.
He gets paid by the hour. LMFAO😂😂😂
Brilliant idea😊
Brilliant?? Haha. A chop saw does the same thing in 3 seconds, avoids all this nonsense. No one will ever do anything this stupid, including you. ,
Pero porque perder tiempo corte a 90 grado
Ya está a 90 grados.
Nice work man 🎉😊
That’s sick 😮
Awsome
Just cut 45 degrees on each 😮
And you cannot use a chop saw??
Waoo eres un genio mother fo
It's much easier than this lengthy procedure. You just mark a line with the same length as the diameter. Connect it to the opposite tip and then you will get a protected line with 45°. Cut it and enjoy!
As a welder/fabricator, only time I do this method is when shrooms are introduced and I want to be of the up most precise. I'd laugh at you in my shop if you did this 😂
Set your chop saw at 45 forget all the bulshit
That's what I thought, lol
I was think the same thing.
I guess that doesn't make a good video lol
😂😂
If you feel stupid and having complicated life, don't forget this guy exist
For all of us who didn't, now we know; thank you muchly.
Real mente útil su explicación maestro😊
Been a fabricator for 30 years.
This was painfully to watch a freehand 45 degree cut
That was dope thanks 😊
For those of you missing the point this is for those of you who don’t have the tools to just cut a 45° as of the rest of us we know we got the tools to do this same thing easy so why y’all gotta diss I bet at least one person found this video helpful
That might be the most advanced way to get a 45 degree angle i have ever seen 😂
wooooooow ❤ very nice your video is to good ❤ you are great 🙏🙏❤🙏
That was tight. Good cutting job!
That's how you kill time folks. Good job.
Thanks for that knowledge.
And office cubicle dwellers call tradesmen dumb.
Very nice Thanks for all the info, buddy.
Supper 👍
Make that look way more harder than it actually is thank u now my anxiety is through the roof 😅😅😅😭
You could cut that pipe with a miter saw. But i am impressed with the complexity of the task.
You're fired! Adjust your saw like Chris.Davies said or use the 45 degree side of your speed square. 😂
These tricks are good to know if you only have a grinder and no other tool. Jeeze man get the right tool to do this.
The finger shake tells me everything I need to know.
Wow nice bro 😊😊
This the kind of shit people do the minute you hire them by the hour 😂😂😂