Recently I've been looking into hooking up the audio interface into my mobile to at least get rid of computer noise. Your video has probably saved me some hassle and minor expenses, great synchronicity ;-). Thank you.
The gate could do with a bit of release, but it's a very good video! Thank you for showing me ReFir! Now I don't have to deal with the Audacity noise removal
What a massive help! Audacity has this similar noise removal, but I didn't want to have to download and transfer my files to a whole other program just for that so thanks!!
I tried using ReaFir to clean up drum bleed-through from my headphones. Bad idea - Someone else noticed a high pitched whine of an artifact left behind. These days I prefer a Gate - ReaGate in this case - also in your ReaPlugs collection. I've used it to isolate Kick & Snare on a live drum track, isolate a Vox take from an acoustic guitar, etc.
FIR is only good for constant signal like fan, buzz etc.and will always have some artifacts due to signal phase inversion. I personally would not gate or remove any bleed from a drum set recording. Treat it as one single instrument.
@@RecordingStudio9 What I was thinking of is sidechaining kick to bass- making sure only kick hits get through. Plus I use free SK10 rom Wavesfactory to beef up the sub kick. The only other trick for sidechaining I can think of would be to duplicate the kick track & set up the 2nd one to sidechain to bass *only* - cut out the send to the parent track or Master bus. THEN use a Gate on your new "Ghost Kick," but leave the one going to the Master as is.
Thanks nice vid i will be doing this on my recodings this week!...but hey i am wondering if you think this will be good if i have noise that went into my microphone from my headphones?....i was not wearing a sound cancelling headset while recording so i know some headphone noise went into my mic while recording, do you think this well help?
Thanks for watching. Depending on how loud the audio bleed is, I would not worry. Any bleeds between vocals can be edited and deleted for clean vocals.
Is this the same as a sound inverter? Curious if the software is simply copying the noise profile, invert it, then one can use that inversion spectrum over the same music.
No, this process simply detects the noise floor level at all frequency range and removes them if the signal falls below the threshold at that frequency.
My mic is a blue yeti and i have my pc on the desk and the background noise and my voice is reaaaaaaly loud for some reason so hopefully this works for me
But what do you do if the only audio you have for producing the profile is the one that contains the noise? I did a piano recording yesterday when all of my in-laws were here and I sure as all heck-fire aint asking those folk back again any time soon.
Downloaded 64 bit Reaper, installed it but Cakewalk by Bandlab only shows me "32-bit" plugs which don't work. I'm trying to remove hiss from a vocal track. How do I get this plugin to work, before I uninstall it and go find another way to get rid of hiss in an audio file? Thanks.
How would one go about using this for a multitrack? Just copy the procedure for each track? I'm working on an audio book, trying to clean it up best as I can.
You could do that if your PC can handle the process, else, you can process and render (record the track with the FX) each track and move the FX chain to the next track.
I tried this tutorial the same way to clean AC noise from bassy vocal sound with ReaFir and end up with artifacts instead, same as this vocal when said "when you". Do you have any idea how to fix it?
You could try an expander or noise gate instead. Switch ReaFir's mode to Gate and see if that works for you (drag the slider to the left not right to make it more effective). You can also try some of the free expander plug ins out there but there's a decent one built into Ardour. Reaper also has ReaGate, but I don't like that one very much, like most of Reaper's included plug ins. You could also try Waves Z-Noise or NS-1, or WNS. I'd try to learn expanders and gates though, because it helps to know how the traditional stuff worked before fancy plug ins were everywhere.
Why is it always true that the demonstrator clicks and gets one thing the student clicks the same thing and gets something very different? Quite MADDENING, really. I click the arrows and there is NO COCKOs
Things do change over time. But this should still give you so guidance. Did you install Reaper plugins? Did you restart cakewalk and refresh vst folder?
This video suddenly made me smile so wide while holding my forehead 😃 thank you! for uploading this.
😊
I wonder in each part you smiled so much, not cool man, lol
I was amazed how easily that removed background noise, even from older cakewalk recorded tracks.
You are literally A LIFE SAVER thank you and thank goodness I didn’t have to spend 3 hours searching for a good tutorial😁😁
Glad I could help!
Same here, I got two time the results in the first half of the video than I have in ten times the video of others. THANK YOU!!!
@@Tronic416 Twice
Not only did you help me with noise removal, you also lead me to a very nice spectrum analyzer! Many thanks!
I had doubts this would actually work but I actually gasped when I played back my vocals after having utilized the plugin THANK YOU!!!!!!
Recently I've been looking into hooking up the audio interface into my mobile to at least get rid of computer noise. Your video has probably saved me some hassle and minor expenses, great synchronicity ;-). Thank you.
Solved my problem in minutes.
WOW!!! Thank so much
The gate could do with a bit of release, but it's a very good video! Thank you for showing me ReFir! Now I don't have to deal with the Audacity noise removal
Thanks for watching
This is super helpful. Thank You!
Thank you for the video.
Thanks for watching!
Thank you
God send
Good video, thanks for your help
Glad it helped
this is a great tutorial thanks a lot
What a massive help! Audacity has this similar noise removal, but I didn't want to have to download and transfer my files to a whole other program just for that so thanks!!
Exactly what I was looking for!
Thank you so much for this video. I'll try to do that. I couldn't find something like that. Well done!
Tnx for sharing bro
Thank you !! Life saver! Needed this for a song I’m recording for a wedding 🙈🙏🏽🙏🏽.
You’re welcome 😊
Thanks, for making this Video.
Thank you indeed!!
This is really awesome.
Hate that I found this video right when I was gonna drop my mix tape lol thank you 🙏🏽
Really appreciate this video. Thank you very much & God bless you! =)
Oh my god thank you so much for this. LIterally a life saver!
You're welcome!
This is amazing
Nice n clear .......thank u so much👍
Thank you for this! Really helpful!
brother its unbelievable helpful for me. its really i got more then much help from u. thank u verymuch
Happy to help
Thank you very much!
👍 thanks master
Thank You So Much for this video🥺😍💝
Thank You so much
No problem
I tried using ReaFir to clean up drum bleed-through from my headphones. Bad idea - Someone else noticed a high pitched whine of an artifact left behind. These days I prefer a Gate - ReaGate in this case - also in your ReaPlugs collection. I've used it to isolate Kick & Snare on a live drum track, isolate a Vox take from an acoustic guitar, etc.
FIR is only good for constant signal like fan, buzz etc.and will always have some artifacts due to signal phase inversion.
I personally would not gate or remove any bleed from a drum set recording. Treat it as one single instrument.
@@RecordingStudio9 What I was thinking of is sidechaining kick to bass- making sure only kick hits get through. Plus I use free SK10 rom Wavesfactory to beef up the sub kick.
The only other trick for sidechaining I can think of would be to duplicate the kick track & set up the 2nd one to sidechain to bass *only* - cut out the send to the parent track or Master bus. THEN use a Gate on your new "Ghost Kick," but leave the one going to the Master as is.
Or use trigger that listenes to Kick and triggers the Bass sidechain. I'm sure you are creative enough to work it out :)
Great video
THANK YOU!!!
This video made a difference. Thank you Very much!
Glad it helped!
This was soooo helpful. Thank you!!
mine has popping it didnt happen before but now it does happen
Muito obrigado pela ajuda!
Love it! ♥
Thanks so much!!!! Perfect 💕🥰
Thank you so much! You made my day!
Humongous thanks !!
that first track was fire by the way ... drop that track jaaa
Amazing video 🙏🏼
wow 😳 amazing
why when im done subtracting i experienced audio issues?
Make sure you have a consistent noise profile to work with. If the noise profile is too high in ReaFIR, then it will affect your actual audio as well.
omg, amazing!!!!
Thanks! Needed this.
No problem!
thanks
good video. :)
What's your opinion about the denoise that comes with bandlab ? Is this reaperplugin better ? Cause otherwise one could also export the track(s) 🤷♂️
thanks
Very helpful....
Great and helpful , thanks a million
You're welcome!
Hey! Thanks for the video! I can't install cockos each time I download the plugins. Doe you know how to solve this?
great video nice examples
Glad you liked it!
Cool it's easy! Thanks
It didnt work for me
Help it's not in the plug ins even though i have installed it
Thank u u da best man
Happy to help
Hmm i I downloaded the DAW that might be why it don’t work but the web address you give doesn’t exist anymore
In stalled them but they fail to load
Nice One tutorial
Bro this is fireeeeeeee my record quality is so much better now thx you boss!
would you recommend to do this to every track that has background noise ?
Thanks nice vid i will be doing this on my recodings this week!...but hey i am wondering if you think this will be good if i have noise that went into my microphone from my headphones?....i was not wearing a sound cancelling headset while recording so i know some headphone noise went into my mic while recording, do you think this well help?
Thanks for watching. Depending on how loud the audio bleed is, I would not worry. Any bleeds between vocals can be edited and deleted for clean vocals.
Oops...When I tried out it turned the whole vox track into some weird autotune effect...
Do you make mixing and autotune tutorial using cakewalk?
Yes
my cakewalk is bugged now :(....... I cant put on any fx it mutes the audio
Is this the same as a sound inverter? Curious if the software is simply copying the noise profile, invert it, then one can use that inversion spectrum over the same music.
No, this process simply detects the noise floor level at all frequency range and removes them if the signal falls below the threshold at that frequency.
Teacher😎
I installed reaper... but i cant see the plugins in plugin column
Did you install the free REAPER VST plugins, or just REAPER DAW?
How can I generate silence in cakewalk similar to audacity? Great content btw!!
Simply split the audio clip and move one on the timeline to the right, and the gap is your silence for the track.
How do I directly get the plugins in Cakewalk instead opening the Reaper's software?
You need to download and install the REAPER plugins separatly as shown in the video.
My mic is a blue yeti and i have my pc on the desk and the background noise and my voice is reaaaaaaly loud for some reason so hopefully this works for me
Try to use a mic shock-mount for the Yeti to reduce desk noise.
But what do you do if the only audio you have for producing the profile is the one that contains the noise? I did a piano recording yesterday when all of my in-laws were here and I sure as all heck-fire aint asking those folk back again any time soon.
You can try spectral audio editing, Eg. iZotope's RX.
Downloaded 64 bit Reaper, installed it but Cakewalk by Bandlab only shows me "32-bit" plugs which don't work. I'm trying to remove hiss from a vocal track. How do I get this plugin to work, before I uninstall it and go find another way to get rid of hiss in an audio file? Thanks.
Did you install REAPER DAW or the ReaPlugins?
How would one go about using this for a multitrack? Just copy the procedure for each track? I'm working on an audio book, trying to clean it up best as I can.
You could do that if your PC can handle the process, else, you can process and render (record the track with the FX) each track and move the FX chain to the next track.
Hi, I have both Reaper and Cakewalk installed. But my reaFir failes to load. Is there any special place the plugins have to be installed in Cakewalk?
Have you installed the free reaper plug-in bundle?
I make rap music and I have cakewalk recently and my pc fans are bad loud so I'll see if it wrks bro
Try eliminating the noise by keeping the mic away from PC fan. Better than trying to clean later.
I tried this tutorial the same way to clean AC noise from bassy vocal sound with ReaFir and end up with artifacts instead, same as this vocal when said "when you". Do you have any idea how to fix it?
Try iZotope RX7
You could try an expander or noise gate instead. Switch ReaFir's mode to Gate and see if that works for you (drag the slider to the left not right to make it more effective). You can also try some of the free expander plug ins out there but there's a decent one built into Ardour. Reaper also has ReaGate, but I don't like that one very much, like most of Reaper's included plug ins. You could also try Waves Z-Noise or NS-1, or WNS. I'd try to learn expanders and gates though, because it helps to know how the traditional stuff worked before fancy plug ins were everywhere.
Nm found em lol
Can we remove noise in the pre processing? I mean the Pro channel mode rather than the Fx? Can you please advise regarding that?
Add FX module in the ProChannel and place it/move it at the top
It's called the Shure SM7b microphone. Best noise rejection design ever~!
😁 not everyone can afford it 🎤🎙
@@RecordingStudio9 True - I had a little extra money at the time I got it. Easily the most affordable "Studio Grade" mic around.
nevermind i fixed it
How?
Why is it always true that the demonstrator clicks and gets one thing the student clicks the same thing and gets something very different?
Quite MADDENING, really.
I click the arrows and there is NO COCKOs
Things do change over time. But this should still give you so guidance.
Did you install Reaper plugins?
Did you restart cakewalk and refresh vst folder?
it just does some autotune thing its weird