Bell & Gossett Series 60 Motor Mounts & Coupler Replacement
Вставка
- Опубліковано 5 лип 2024
- Hearing funny noises from your B&G Series 60? Watch The Pump Doctor replace the motor mounts on coupler on a maintenance-free, small-bearing frame Bell & Gossett Series 60 Pump.
Tools required for Bearing Assembly Repair Kit:
- 3/8" Ratchet
- 5/8" Socket
- 9/16" Wrench
- 7/16" Wrench
- Straight Screwdriver (thick)
- Phillips Screwdriver
- Hammer
- 1/8" Allen Wrench
Call our dedicated Bell & Gossett line at 877-775-7782 to talk to The Pump Doctor or visit us online at www.statesupply.com today.
Shop the NEW Bell & Gossett Series e-60 Pumps ➡️ www.statesupply.com/bell-and-...
#bellgossett #pumprepair #series60 #impeller #hvacr #hydronicheating #mechanical #engineering
0:00 Intro
0:17 First Steps
0:58 Disconnecting from Bearing Assembly
1:28 Disconnecting Coupler
2:45 Removing Motor from Cradle
4:20 Inspecting Motor Mounts
4:53 Removing Motor Mounts
6:30 Replacing Motor Mounts
8:07 Putting Cradle back on
11:02 Replacing Motor Coupler
14:14 Final Steps
thank you so much Sir, it took me 41 min and some 30 from it to remove the old mounts))). Tried to use the screwdriver as you show, but the rubber was so old it is just torn out from the inner ring and the inner ring remain on the motor. It was the hardest part to remove those inner rings. Anyway it finally works, let's see my couple life cycle. It is about 3 month before today. Countdown!
Taco 1612 c rebuild I would like to see, it's all we have at our building and we are slowly removing the to bell& Gossett pumps, thank you for all your expertise have learned a lot from your show keep up the training for everyone, keep up the great work thanks.
These guys are the best. They got me information on a pump that someone put the wrong motor on. The motor was single phase but had the wrong rotation (as I suspected). Just solved a 4 year problem with a 10 minute call.
Tom great instructional video. Just replaced my motor and pump. Can't believe how quiet it runs. Thank you Brad!
Thank you for the good instructions, use to cost me a couple of hundred dollars every time I called a plumber, but you made it so simpler that even myself could do it.
once again thank you
Excellent video start to finish. Good info. Good filming. Thank you!
Professionally done all the way around--thanks.
Very detailed! Looks like you've performed that maintenance many times. Thanks for sharing your video. I'm a gal who feels pretty competent of completing this task with the help of your video. Thanks again!!
Thanks for the video. Good useable directions. I just had to be careful when I removed the mounts so that I did not damage the casing. Thanks.
Thank you.
Great video. Thank you
very well done....thanks
very accurate plans for something like that I found on Avasva
Excellent!!
Well detailed! Thanks
We're glad you enjoyed it!
amazing!
Excelente video.
Ojalá y pudiera hacer un vídeo la marca armstrong...graciasssss.
very good video
Thanks for great video. I got B&G part#W 72701 Model #601S. The coupler was making noise and now pump start leaking. I did some research. I only need to replace coupler and motor mount to stop the leak without touching bearing assembly they said. Is the true?
Thank you👍👌👍👍
Thank you
We're glad we could help!
Good video. Can you please provide bell and gossett or motor mount part#.
ThanksTJ
Thanks for reply S-25 BF
That's actually an Armstrong pump. Is it an Armstrong or B&G motor?
how do you find the correct motor mounts part #
how do i determine the size of the motor mounts , what do i look for or what do i measure
If you are able to provide the pump part number or motor part number, we will reply with a link to the correct motor mounts for your motor.
👍👍
what kind of tool did you use to remove the screw, hex or star tool?
Good afternoon - use a hex for the set screws!
Why do you say to position the groove (B&G calls it the "break" or "split") in the outer ring of the mount straight up?
The Instructions included in and on the back of the packaging for new motor mounts says to position it straight down.
The mounts on the motor that you take off in the video are even positioned straight down. Thanks
Also wanted to say Thanks for all the videos. They are very helpful.
Hi Joshua, field service professionals prefer to put the motor mount groove upwards so the weak part (groove) isn't bearing the weight of the motor. This is opposite of the instructions unfortunately but we suggest putting the mounts up. Hope this helps!
Does anybody know where you can buy a new coupler, mine got gnarled up last weekend, and I don't want to buy a whole new pump.
Spiralink are the best
Where can you get motor mounts
Hi Ralph - you can find the Series 60 motor mounts here: www.statesupply.com/bell-and-gossett/pump/part/motor/mount?pump_series_repaired=series-60,series-e-60 - (I work for State Supply). Give us a buzz in the morning if you have questions. Phones are live at 7am CST.
What does the coupler do?
i also am wondering what it does
It couples the pump shaft to the motor shaft ... Google "shaft coupling."
@talktomooney we sell thousands of them each year. For some reason, I am having problems posting the Web URL for the Series 60 Couplers in this comment. Feel free to give me a buzz at 877-775-7705 and ask for Tom. Thx!
Armstrong pump
The new motor mounts are solid metal? What is the point of their existence in the design, then?
Hello Jamie, the new series 60 pumps with 1.5 hp and above are C face motors which do not need the motor mounts as they get mounted directly from the face of the motor.