@@pierogiengineering power up the Bass Cannon 😎 i'm getting my subwoofer soon aka the next day it's going a dual 18inch subwoofer that has 6400peek watts and the rms watts is 1600 and the db is 138db no cap
I got ya beat! I built a subwoofer with a 30” ElectroVoice woofer in an 85 cubic foot enclosure! When I hooked it up to a signal generator, I was able to find the resonant frequency of the house; and it was so scary what it was doing to the walls. I later found drywall nails that had worked out through the spackling and paint! 😮 Anyway, nice build. Try running it outside where you can develop the lower wavelengths more fully. You probably noticed that the further you were away from it, the better the bass response…
@@bailey2517 well, a 20Hz tone is about 56.5’ and a 40Hz tone (a low E on a bass) is 28.3’ so if you are closer, then you are within a fraction of that distance and so the full wave hasn’t a chance to fully develop (especially if there are walls and surfaces that reflect and detract thereby breaking it up and destroying the original phase). But even if there are walls, hallways and corners, you will still notice a much more powerful and clean note further away. Finally, fractional waves don’t efficiently resonate their enclosures which contributes to them being attenuated. If you have a good system, take it outside and separate it about 75’ between speakers then place yourself between them; then back up until you peak the bass and that is the sweet-spot! 😀
just got recommended your channel and youve earned a new sub, this shit is hilarious and impressive. Makes the stuff i built in my bedroom in high school look like a joke. Hell, even the system i have in my living room now is nothing compared to this beast, although my days of chasing bass are over. I wish i had known about that switch that you use for converting wall power to DC. When i was your age, i had two car batteries and a high output battery charger in my bedroom to power my amplifier.
wow, thank you for re-introducing me to the world of DIY audio. I got out of it as I started to get deep into just audio production but this took me back to my days of literally blowing out the ceiling at my parents' house w/ a super ghetto in-home setup I built w/ a car battery + trickle charger + my brother's MTX JackHammer & car amp that he let me use. I wish I didnt have such a shitty camera & that I was more aware that other people would have cared to watch it too back in 2011 lol
@@notevenclose26 thanks my duderino, that means a lot coming from someone who is legitimately the irrefutable GOAT. Real recognize real - bc tbh I knew the exact picosecond I read your reply, that I was in the presence of someone who is unmatched in their ability to reply to my comment - in fact, compared to the next closest competition, you are better than them by a factor that's approaching infinity.
I'm almost 33 and getting back into it myself. Thinking about building a neat little 12" PA sub to compliment my outdoor party speakers which put out nothing below 80 hz. Like most of us, I dont need it at all, it's just fun to do and the journey there is 90% of the fun.
Would love to see a measurement to compare the simulated response to what it actually does. I also had to laugh when you covered the port holes the same way i just did to a test-enclosure
@@pierogiengineering oh that sucks but you really dont need a lab to do that. Just whip out ye ol room eq wizard and do get an anechoic response just move the box outside as far away from walls as possible. Don't wanna explain the whole thing as its a pretty in-depth process, but it's possible. I do measurements like that all the time. I have my own software but rew is good enough for starting out.
Have you tgough about building a double cone setup one forward and one backwards? When i was in graphic design college, i did an intern at a speaker building company. It was called Stage accompany. They made big high end speakers. While i was there, they where testing and devlopping a big nee woofer which had this Setup. They were testing it with hardcore and techno. The complete building was resonating from this single woofer. The damn thing was huge. If i recall 1.2x1.2x1.2 meter. The sound was incredible l!!
Very nice supasubboombox! The 1 thing I do different (makes huge difference) so inside the box I reinforce the "floor, backwall&ceiling" with Plexi. Cut to size, drill holes. Put a layer of glue down, then drill some screws in and you'll thank me later 😉
The track is called "Undring" by harmonica player Sigmund Groven and organist Iver Kleive from their Harmorgan album. However, I recognize the track in this video as an enhanced version by AJ BASS. The organ's bass notes do run at 16 Hz. Go to "AJ BASS" channel on UA-cam and look for the video called "Sigmund Groven & lver Kleive harmOrgan [16 Hz Sub Bass-C0]" Warning, most of the videos in his channel can probably blow your speakers :)
Really awesome I make the same design almost 🤌! I just don't know if you do but such smooth ports you don't REALLY need (plus can be done easy DIY with a drill and heat!) But depending on the box's size you'd have a length of tube going IN to you soundbox that length depends on its size and impendage 😊 as last I also use woodglue but just more and after that I caulk the corners in 2/3 times, very thick! Cheap products will do 😉✌️
Half the time I’m like nice, then half the time I’m like WTF are you doing with staples, a drill from 1975 and a 10 other weird ass things like however the hell you attached the final side. Like watching someone make a nice wooden table then for some reason they glue the legs on with mustard and beat it with an umbrella. Construction is weird wherever you’re from.
Damn that thing is massive, also can we appreciate how buff this guy is lmfao
Mad respect
@@pierogiengineering 👍👍
@@pierogiengineering power up the Bass Cannon 😎 i'm getting my subwoofer soon aka the next day it's going a dual 18inch subwoofer that has 6400peek watts and the rms watts is 1600 and the db is 138db no cap
@@pierogiengineering subwoofers for life no cap😎
Honestly that's the main reason i'm watching =))
I got ya beat!
I built a subwoofer with a 30” ElectroVoice woofer in an 85 cubic foot enclosure!
When I hooked it up to a signal generator, I was able to find the resonant frequency of the house; and it was so scary what it was doing to the walls. I later found drywall nails that had worked out through the spackling and paint! 😮
Anyway, nice build. Try running it outside where you can develop the lower wavelengths more fully.
You probably noticed that the further you were away from it, the better the bass response…
Can you go more in depth about how lower wavelengths take "longer" to develope? Why do i have to be further away for it to sound right?
@@bailey2517 well, a 20Hz tone is about 56.5’ and a 40Hz tone (a low E on a bass) is 28.3’ so if you are closer, then you are within a fraction of that distance and so the full wave hasn’t a chance to fully develop (especially if there are walls and surfaces that reflect and detract thereby breaking it up and destroying the original phase). But even if there are walls, hallways and corners, you will still notice a much more powerful and clean note further away. Finally, fractional waves don’t efficiently resonate their enclosures which contributes to them being attenuated.
If you have a good system, take it outside and separate it about 75’ between speakers then place yourself between them; then back up until you peak the bass and that is the sweet-spot! 😀
Fascinating!! Thanks for the response!@@SpinStar1956
Are we talking in inches here? I like your thinking, what your saying makes sense I want to try
@@stuartcarter5694hes talking in feet
just got recommended your channel and youve earned a new sub, this shit is hilarious and impressive. Makes the stuff i built in my bedroom in high school look like a joke. Hell, even the system i have in my living room now is nothing compared to this beast, although my days of chasing bass are over. I wish i had known about that switch that you use for converting wall power to DC. When i was your age, i had two car batteries and a high output battery charger in my bedroom to power my amplifier.
wow, thank you for re-introducing me to the world of DIY audio. I got out of it as I started to get deep into just audio production but this took me back to my days of literally blowing out the ceiling at my parents' house w/ a super ghetto in-home setup I built w/ a car battery + trickle charger + my brother's MTX JackHammer & car amp that he let me use. I wish I didnt have such a shitty camera & that I was more aware that other people would have cared to watch it too back in 2011 lol
GOATED comment
@@notevenclose26 thanks my duderino, that means a lot coming from someone who is legitimately the irrefutable GOAT. Real recognize real - bc tbh I knew the exact picosecond I read your reply, that I was in the presence of someone who is unmatched in their ability to reply to my comment - in fact, compared to the next closest competition, you are better than them by a factor that's approaching infinity.
if i had a mtx jackhamer id probably get kicked out of my sweat... oh wait i have two 12's 😅. but fr thats a crazy setup for inside a home
I'm almost 33 and getting back into it myself. Thinking about building a neat little 12" PA sub to compliment my outdoor party speakers which put out nothing below 80 hz. Like most of us, I dont need it at all, it's just fun to do and the journey there is 90% of the fun.
that was actually a ton of fun, thankyou for making this video
Happy to hear
Would love to see a measurement to compare the simulated response to what it actually does.
I also had to laugh when you covered the port holes the same way i just did to a test-enclosure
I really regret not doing that when I had the chance. The lab I made this at closed for good 😔
@@pierogiengineering oh that sucks but you really dont need a lab to do that. Just whip out ye ol room eq wizard and do get an anechoic response just move the box outside as far away from walls as possible. Don't wanna explain the whole thing as its a pretty in-depth process, but it's possible. I do measurements like that all the time. I have my own software but rew is good enough for starting out.
I love the Pat & Mat music!
This is the second video of yours I watch. You will go big! I dig your attitude and determination, man!
Bro, your parents faces 🤣🤣🤣
Ye
😂
Timstamp pls
Man i wish i had a "computer recycling center" like that near me.
That's what i call heaven!!
Świetny projekt
Sąsiedzi Cię znienawidzą xD
Bardzo motywujący opis kanału
Czekam na więcej projektów tego pokroju :P
awesome work! you should make a sealed internal driver horn style labyrinth bass bin to get some really low sounds!
I really respect and appreciate your fabrication work
Have you tgough about building a double cone setup one forward and one backwards?
When i was in graphic design college, i did an intern at a speaker building company. It was called Stage accompany. They made big high end speakers. While i was there, they where testing and devlopping a big nee woofer which had this Setup. They were testing it with hardcore and techno. The complete building was resonating from this single woofer. The damn thing was huge. If i recall 1.2x1.2x1.2 meter. The sound was incredible l!!
Isobaric
now come on man, with such a good editing skill 3 years ago, your channel should have been 1mil+ subs if you were dedicated. really entertaining stuff
Absolute legend man. Always fun to watch and try to follow along.
Very nice supasubboombox! The 1 thing I do different (makes huge difference) so inside the box I reinforce the "floor, backwall&ceiling" with Plexi. Cut to size, drill holes. Put a layer of glue down, then drill some screws in and you'll thank me later 😉
Ahh nie ma to jak muzyka z "Sąsiadów" przy budowie czegoś XD
Żebyś wiedział! Odrazu wszystko lepiej idzie
love the Pat and Mat music
Bruh this is the man I aspire to be (annoying the crap outta my parents while shaking walls)
this video was super cool mainly from 0:01 to 20:40
Get some push sticks before you wind up short a few fingers. I was flinching at some of those cuts...
Bro, I’m totally like you like a kid in a candy store in electronics recycling places… and I’m 44 now. Used to build subs just like you too. Rock on 🤘
You feel the energy in the room thats crazy
18:45 whats the name of the song
The track is called "Undring" by harmonica player Sigmund Groven and organist Iver Kleive from their Harmorgan album.
However, I recognize the track in this video as an enhanced version by AJ BASS. The organ's bass notes do run at 16 Hz. Go to "AJ BASS" channel on UA-cam and look for the video called "Sigmund Groven & lver Kleive harmOrgan [16 Hz Sub Bass-C0]" Warning, most of the videos in his channel can probably blow your speakers :)
SO MUCH FKIN RESPECT FOR THE Pat&Mat MUSIC
Dude you’re really talented and still you man. You are gonna master box building if you stick with it
This is one of the funniest videos I saw in my whole life, i love your channel
My mom would have cut the power if i rattled the house like that 😂
I had an enclosure in the trunk of my 01 dodge intrepid that was 6cf for 2 15" L7 kicker solobaric subs on a Memphis ST-1500D amp, i miss that set up
Damn! 🎉 a channel that actually deserves 1-Million subscribers 👍
Car audio guys be like: look what they need to have a fraction from our power!
What type of box is this? never seen it before, pretty interesting. I enjoyed watching the entire 20 minutes! I like your way of editing nice video
Angel Trumpet, Datura, those caterpillars be trippin'.
Bros got the toilet flange port I bet that joker really lets out some farty bass, just don’t blow the subwoofer or it’ll smell like a bit stinky 😂
If it works, it works 🤷♂️
@@pierogiengineering true fr bro no cap😎
Was that a 4th order bandpass? did you run a sweep w/logger to find out it's resonance point(s)? Anyway, it appears to jam out nice!
Thats a decent sized Device, good job.
I feel like that first box plays a part as well in the parameters you got. But i don't have equipment to test.
I like the video and all but the way u handle table saw makes me wonder how many cuts you have left without an injury. Have some imagination
2:44 The best soundtrack❤
Absolutely
Man just made my dream
This build needs more views
14:46 Yeaaa, I feel ya there when I do some of my own DIY projects. ;3
Hajaha your editting with fresoy retro audio and the shots are hilarious 😅😅
dude this looks more like an aircraft part than a home entertainment module
I love the fact i can experience how low it actually goes with these earphones
What a beast, subwoofer is cool too
You making awesome job.
Hahaaa.. I Love the Pat&Mat music.
This man is so quirky I love him.
Love the “buurman en buurman”
did not expect this guy to be so funny lol
Great project! Please do not use a table saw again without a more extensive safety class.
TRACK LIST BRO
Mother is not yelling, complaining, screaming, almost does not care about it. Probably the coolest mom ever to not give af.
She is probably glad that her son it's doing something with his life and not lose time.
It's never loud enough 😎🔥
dancing was funny nice video
Where the hell did you find that store?
You went godlike mode ahah I liked this ! Just discoverd your channel + 1 sub
would pay alot of money to just listen once to that bones song did not rly understand the last part but i like the video thanks
massive respect I love your vids
These videos are sick
Crazy but cool build
Please tell me the song at 19:27
Been watching you for ages bro, your videos never disappoint 🔥🔥
wow i was - not expecting to be hit by pat a mat
What do you think about the Diamondboxx SUB8.2?
I mean, for a production Bluetooth speaker.
Really awesome I make the same design almost 🤌! I just don't know if you do but such smooth ports you don't REALLY need (plus can be done easy DIY with a drill and heat!) But depending on the box's size you'd have a length of tube going IN to you soundbox that length depends on its size and impendage 😊 as last I also use woodglue but just more and after that I caulk the corners in 2/3 times, very thick! Cheap products will do 😉✌️
Bro can you drop the playlist please 😂
dude i want the desing to make iít for my 7 inch(17,5 cm) subwoofer
19:46 mom looks terrified
AH, the Deathbox! that design was came about years ago
13:56 oh yeah that spray adhesive is THE SHIT
Did you used "Pat a Mat" song ? :D
Yep
that is amazing
why this video has only 2800 visuals?, this subwoofer is very well made
Algorithm it weird 🤷♂️
Songs?
Pat & Mat
Dude, gift me with this shit. No kid should do homework in my neighbourhood.
Your gorgeous mom always looks back at the camera like her final moment alive
"OMG.... What had he build today?" 😂
mom did indeed not like it
Half the time I’m like nice, then half the time I’m like WTF are you doing with staples, a drill from 1975 and a 10 other weird ass things like however the hell you attached the final side. Like watching someone make a nice wooden table then for some reason they glue the legs on with mustard and beat it with an umbrella. Construction is weird wherever you’re from.
Names of the video at 18:48?
Does someone know what the songs in the end were?
I only know that one of em was Bones-OkayButThisIsTheLastTime
the speedometer was used by styropyro for his crazy laser gun lol
lol i saw that too
whats the songs name at 18:13
The feeling of bass
You are so cool dude 🎉🎉🎉
7:51 lol i love this part hahahaha
What is the name of the song 19:28
your Fs will drop over time once you loosen up the suspension. All the TS Params will change over time.
I use the Tenet Soundtrack to test subwoofers :)
very impressive, looking fwd to seeing what you are going to do with your life after HS graduation
Glad you like it. I’ll do whatever brings good money, and doesn’t feel like a job.
@@pierogiengineering Remember life is a very short thing so enjoy it while you’re making big-time money
@@haroldvalin7110 that’s the goal
What sound test app is that?
Tone gen
19:48 hi mom 🥰
Pat a Mat soundtrack, funny moment
5:38 lmfao bro someone is actually going to take that rice bait & write a comment about it 100%
Try out the track "9 to Ya Dome" by Eprom. ❤
Is that 4th order?
Czy tylko Polacy budują subwoofery w USA? Najpierw Hexibase na swoim kanale, a teraz Daniel tutaj :D
Ciekawy kontent, fajny montaż, super się to ogląda
Dzieki
Bandpass will always win❤
Cool video