Get ya some PB Blaster and fill the well of each spark plug on a cold engine. Let sit for a half hour then do it again. Start her up, let warm up for say 20-30 min. then shut her down and immediately squirt each plug thread body with PB, where it meets the engine. An expanded hot hole, then a cooled shrinking plug and pop, out she comes.
From Donald I have similar problem but lot worse the man that owned my dodge truck 4x4 ram 2500 Never changed spark plugs. The tubes around the plugs are rust pitted and for me to get them out is flat nose vise grips, needle nose vise grips, hammer, and my air hammer to knock tubes upward even though I soaked them PB blaster. I got 3 tubes out pain in the butt. The broken spark plug is another problem soaking it with PB blaster and then air blowing it dry trying map gas heat to free base threads out of cyl head. This what happens when you don't look at your spark plugs. I still got the whole drivers side to do yet so patients is the key. Glad I'm retired and I got lot time to fix this mess. Wish me lot luck everyone.
Excelkent job ! I have what looks like hard black stuff on one side of the plug ! Could this be melted plastic that hardened on a 12 year old car? Someone never changed the damn plugs!!
Ok folks keep your eyes peeled on anybody named Noah building an ark or anyone named Lot moving out of your neighborhood. It's your duty to let everyone else know so we can get our shit together. I don't like surprises.
Thanks first video seen that might actually help. First time trying to take them out and there in there. Gonna try penetrating spray then if not your method.
Thats on an easy to reach engine with 4 to 6 cylinders - MANY 8 Cylinder engines have hard to reach spark plugs aligned sideways so its not as easy as what you are showing.
Hello please could you get in touch with me, my girlfriends car (same exact model year , etc ) has been broke down for 2 months now and have no means of transportation and she is having the same exact issue with it starting and the spark plugs melting. I was looking to find out exactly how the car was fixed in Hope's that it will help us.
Video really starts at 5:32
Get ya some PB Blaster and fill the well of each spark plug on a cold engine. Let sit for a half hour then do it again. Start her up, let warm up for say 20-30 min. then shut her down and immediately squirt each plug thread body with PB, where it meets the engine. An expanded hot hole, then a cooled shrinking plug and pop, out she comes.
Thanks Pat, Read this, did that, worked great! Job done. Appreciate your quick input 👍
From Donald I have similar problem but lot worse the man that owned my dodge truck 4x4 ram 2500 Never changed spark plugs. The tubes around the plugs are rust pitted and for me to get them out is flat nose vise grips, needle nose vise grips, hammer, and my air hammer to knock tubes upward even though I soaked them PB blaster. I got 3 tubes out pain in the butt. The broken spark plug is another problem soaking it with PB blaster and then air blowing it dry trying map gas heat to free base threads out of cyl head. This what happens when you don't look at your spark plugs. I still got the whole drivers side to do yet so patients is the key. Glad I'm retired and I got lot time to fix this mess. Wish me lot luck everyone.
Thank you 😌 I got a Spark plug stuck.
Me too. Two
Thank you. Went to a lot of other vids & nothing like this method.
You’re hella lucky those plugs weren’t seized into the cylinder head whatsoever.
Yes that's what I'm worried about.
Excelkent job ! I have what looks like hard black stuff on one side of the plug ! Could this be melted plastic that hardened on a 12 year old car? Someone never changed the damn plugs!!
Indentation is the word you were trying to use. Hope that helps .
Ok folks keep your eyes peeled on anybody named Noah building an ark or anyone named Lot moving out of your neighborhood. It's your duty to let everyone else know so we can get our shit together. I don't like surprises.
Thanks first video seen that might actually help. First time trying to take them out and there in there. Gonna try penetrating spray then if not your method.
Thank you I fixed my derby car
Will it work on a 4 liter chevy S10 ?
No only on the s9
Thats on an easy to reach engine with 4 to 6 cylinders - MANY 8 Cylinder engines have hard to reach spark plugs aligned sideways so its not as easy as what you are showing.
So you soaked it in WD-40 overnight
This really worked for me
About to attempt right now:()
Hello please could you get in touch with me, my girlfriends car (same exact model year , etc ) has been broke down for 2 months now and have no means of transportation and she is having the same exact issue with it starting and the spark plugs melting. I was looking to find out exactly how the car was fixed in Hope's that it will help us.
WD might work but turning the top of sparkplug doesn't work t tip of the plug comes off and the plug is still in the car your way don't work
smart
We wanted to get to the point, 5 minutes ago. What a waste of time!
Get to the point get the frkn plug out