After you initially break the fill assembly loose, put a socket on the male foster fitting on the end of the fill assembly to remove it SOOOO much faster. It should be tightened enough to just unscrew the whole assembly without affecting the fill nipple at all.
This is an 8 year old video that was re-uploaded after deleting our main account. Previously, it was possible to give text notes, which unfortunately youtube canceled. Certainly, the installation procedure in the Czech language would not help to you much. Written instructions are here www.altaros.cz/en/benjamin/5-regulator-benjamin-marauder#/|demoTab3
I really wish the installer was talking in this video .my question is when the regulator enter the valve and I see the o ring am I suppose to push it in until the o ring reach the other end of the hole?
All you have to do to install is really do what you say. The allan key at the gauge hole is used to prevent the o-ring from being cut by the sharp edge of the hole. They are simply pushed onto the o-ring during pushing of the regulator.
@@AirgunRegulator can i adjust the output while the regulator is still intalled inside the airtube? Coz i dont want to lose another oring while putting it back in
Depending on the position of the o-ring on the regulator, airtube pressure or regulated pressure can be monitored. All need that you have to do is change the position of the o-ring on the brass roller that is inserted into the cylinder in the airtube
@@AirgunRegulator on the videos and pictures of the regulator I can see the o ring at the end of the regulator and I can see another slot above which one to use the o ring to if I wana the gauge the read the air tube pressure?
@@chriswelljack4910 for read airtube pressure, is need o-ring in the groove closer to the end of the brass tube (this setting can be found on a new regulator sent from us)
@@queenkong48 He sounded like he knew what he was talking about, until he mentioned Turkish guns. I guess he's probably upset with Crosman because he can't seem to get the Red Ryder regulated yet.
After you initially break the fill assembly loose, put a socket on the male foster fitting on the end of the fill assembly to remove it SOOOO much faster. It should be tightened enough to just unscrew the whole assembly without affecting the fill nipple at all.
Could not hear the sound at all and missed important in formation.
You are not paying this guy enough to talk and explain what he does at the same time when he is installing it?
This is an 8 year old video that was re-uploaded after deleting our main account. Previously, it was possible to give text notes, which unfortunately youtube canceled.
Certainly, the installation procedure in the Czech language would not help to you much.
Written instructions are here
www.altaros.cz/en/benjamin/5-regulator-benjamin-marauder#/|demoTab3
The most ridiculous way to remove the fill assembly too.
Hi! What about original depinger inside? No problem? This rifle has original depinger? I have Armada with depinger and I am worrying about it
2e recommend removing the depinger, but if it is left, it is also possible.
@@AirgunRegulator thank You sir
Cant find the perfect setting of mau marauder now. Req set 100bar crossman premier 10.5g still at 720fps
I really wish the installer was talking in this video .my question is when the regulator enter the valve and I see the o ring am I suppose to push it in until the o ring reach the other end of the hole?
yes, this protects the o-ring from damage by the edge of the manometer hole.
@@AirgunRegulator ok good thank u
Why not use a wrench on the quck fill valve?
At using a wrench for some rifles is only unscrewed the quick-release from quick-fill but the all plug remained inside the airtube.
It really is that easy
So thats it? Just plug it in,nothing to adjust? What is he doing with the wrench key when he plug in the manometer port???
All you have to do to install is really do what you say. The allan key at the gauge hole is used to prevent the o-ring from being cut by the sharp edge of the hole. They are simply pushed onto the o-ring during pushing of the regulator.
@@AirgunRegulator can i adjust the output while the regulator is still intalled inside the airtube? Coz i dont want to lose another oring while putting it back in
@@deditio3036 if you use a longer flat-blade screwdriver or make it from a 6mm rod, then yes
@@AirgunRegulator okk thankss
I'm still not sure how far I push the reg in??
It push as deep as possible.
@@AirgunRegulator Thank you..
What pressure the gun gauge gonna be showing?
Depending on the position of the o-ring on the regulator, airtube pressure or regulated pressure can be monitored.
All need that you have to do is change the position of the o-ring on the brass roller that is inserted into the cylinder in the airtube
@@AirgunRegulator interesting I think am getting the regulator
@@AirgunRegulator on the videos and pictures of the regulator I can see the o ring at the end of the regulator and I can see another slot above which one to use the o ring to if I wana the gauge the read the air tube pressure?
@@chriswelljack4910 for read airtube pressure, is need o-ring in the groove closer to the end of the brass tube (this setting can be found on a new regulator sent from us)
@@AirgunRegulator great thank you very much?
The best tune for a marauder is the garbage tin and then buy a good German, British, Turkish or Russian made rifle.
Sounds like a troll that owns a red Rider BB gun.
@@queenkong48
He sounded like he knew what he was talking about, until he mentioned Turkish guns.
I guess he's probably upset with Crosman because he can't seem to get the Red Ryder regulated yet.
The marauder is a very good gun
Terry if you can't figure out how to use the Marauder, maybe you shouldn't be using an airgun at all.
@@ezrider4348 if you say so. American built is usually the crappiest and at the highest of cost.