As an Ulterra owner for close to six years, I have run into my fair share of "moments" with this unit. This is the best video for trouble shooting and then conducting a reset that I have watched on UA-cam. Thank you!
This was a great video with good tips. Perhaps you could me with a motor that is stuck in the “stowed” position. The motor got deploy while still in the transport brace.
Hi Pockey - our minn kota was stuck in between the holder on the stow position and tried to pull the housing trim unit so that we can push the pole and the motor out but was unable to, any suggestion how can we remove this from the in between holder, the motor as sitting in 90 degrees position with the fan facing upward - need help and assistance as every time we bring this to the boat shop it always cost us more than 1000 - that is every time we have an issue we are here in darwin, northern territory - thanks and I appreciate it
@@TheSuperdaytona500 How did you managed it to get it back, I am in the NT, Australia and there is no Authorize Service Provider here, I was told by MinnKota in the US to bring it to the MinnKota Authorize Service Provider, means bringing it in to the BOAT shop and every time we have to bring it in it causes us to SPEND more than 800 Australian dollars, we have been there few times and this time we are a bit hesitant but we have no choice!
I have a brand new 36V Lithium battery. I was out a couple days ago and my battery ran out of juice and my trolling motor was stuck deployed. I made it home, charged the battery and was able to stow it. Now, it won’t deploy and I get an audible beep from the iPilot and a red and green flashing. I’ve taken it all apart and cannot figure out what’s going on. The cam arm is good and no obstructions on the shaft. Any ideas?
As an Ulterra owner for close to six years, I have run into my fair share of "moments" with this unit. This is the best video for trouble shooting and then conducting a reset that I have watched on UA-cam. Thank you!
That was great. All the problems I had today I now know a lot more about. Thank you!
This was a great video with good tips. Perhaps you could me with a motor that is stuck in the “stowed” position. The motor got deploy while still in the transport brace.
Hi Pockey - our minn kota was stuck in between the holder on the stow position and tried to pull the housing trim unit so that we can push the pole and the motor out but was unable to, any suggestion how can we remove this from the in between holder, the motor as sitting in 90 degrees position with the fan facing upward - need help and assistance as every time we bring this to the boat shop it always cost us more than 1000 - that is every time we have an issue we are here in darwin, northern territory - thanks and I appreciate it
Mine is the exact same
@@TheSuperdaytona500 How did you managed it to get it back, I am in the NT, Australia and there is no Authorize Service Provider here, I was told by MinnKota in the US to bring it to the MinnKota Authorize Service Provider, means bringing it in to the BOAT shop and every time we have to bring it in it causes us to SPEND more than 800 Australian dollars, we have been there few times and this time we are a bit hesitant but we have no choice!
Great video. Thanks
Hello, my issue is the remote is saying "stowed position" I push deploy and it has that message and the red light is on. Any suggestions? Thanks
I have a brand new 36V Lithium battery. I was out a couple days ago and my battery ran out of juice and my trolling motor was stuck deployed. I made it home, charged the battery and was able to stow it. Now, it won’t deploy and I get an audible beep from the iPilot and a red and green flashing. I’ve taken it all apart and cannot figure out what’s going on. The cam arm is good and no obstructions on the shaft. Any ideas?
🤘🏿