Quick Fix for ADA MP-1 Preamp Error Codes: Factory Presets & Dead Battery Tips
Вставка
- Опубліковано 19 сер 2024
- www.marshalljmp...
www.adadepot.com
Are you frustrated by your ADA MP-1 guitar preamp scrolling through channels and flashing error codes (error 1, error 2, error 3) on startup? We understand your pain, and in this video, we've got the ultimate solution for you. Say goodbye to those perplexing error codes and regain control of your ADA MP-1.
Join us as we walk you through a quick fix for this channel-scrolling nightmare and the associated error codes. Discover how to reset the factory presets and bring your MP-1 back to its original glory. If you've lost your customized presets due to a dead onboard battery, worry not - we'll guide you on reloading the factory presets, so you can get back to rocking out.
But what if you're unsure about soldering or replacing the battery yourself? Don't worry, we've got you covered! Learn about an alternative mod that allows you to replace the battery without soldering. We'll even direct you to a reputable seller in Europe who specializes in ADA MP-1 mods.
Whether you're a current MP-1 owner experiencing the channel-scrolling issue or considering purchasing a used unit and worried about encountering these problems, this video is your ultimate resource. We provide step-by-step instructions, valuable tips, and insights into troubleshooting ADA MP-1 preamp problems, including those perplexing error codes.
Don't let channel-scrolling and error codes hinder your musical journey. Tune in now to unlock the secrets of resetting factory presets, managing dead batteries, and reclaiming control over your ADA MP-1 preamp.
Subscribe to our channel for more greasy home recording tips and tricks. With our help, you'll conquer the channel-scrolling issue and rock out with confidence and sound!
All the audio recorded in our videos is recorded direct into either an M-Audio Profire 2626 or a Behringer Ultragain Pro-8 interface direct into Logic Pro X mixed using stock plugins on a Mac Pro 3,1 (2007 model) running OSX 10.11.6.
Microphones do get changed up every so often but usually our drums are mic'd up with:
Kicks - Shure Beta 52
Snare - Shure SM57 / Lewitt MTP 440DM
Toms - t.bone DC4000 kit
Overhead - Lewitt LCT 140 AIR
Room - Lewitt LCT 240 PRO
Guitar Amps - Shure SM57 or Lewitt MTP 440DM
Get your Black Bridge Sound merch here:
black-bridge-s...
Follow Black Bridge Sound on social media!
/ blackbridgesound
/ blackbridgesound
/ mikecottondrums
/ jarrettdeathmarch
Also check out our own individual channels!
/ mikecottondrums
/ jarrettlowry
Belgium is correct. Now one side note, the backup feature only works with firmwares 2.00 and 2.01. It doesn't work on 1.36,1.37 or 1.38.
Solid info! I was unaware it didn’t work previous to 2.00!
Explains why mine (1.38) does not flash "presets loaded" on my display. I thought I was doing something wrong!
@@LOLAAUM A V1.xx will display "LP" (load preset)
@@marshalljmp800 thanks! I did finally figure it out. Now it's working perfectly.
Thanks for the info, did the MOD and reset the presets and am in business
Groovy inset close-up screen, gents! Quality information, delivered with panache.
Gesturing began with the "English tea" finger - very refined, Jarrett - but quickly escalated into brandishing the "smells like teen spirit" digit. Grease prevails, lezz go...
...nice cameo, Mike...
Just did this myself after experiencing this on my 30 year old unit.
Thx man, got my customers up n at iw/this Replaced battery w/Carrier, MUCH better! Snds ab KILLERMAN< Like Dunble clean meets a righteous Bogner! Clean is better than a bog imho played it thru PA IN of a PV Delta blues...YMMV..Jim@Omegaamps
Glad we could help! We still need to get around to putting a battery in ours 😂