Lucky I found alot of stuff on junk yard Cards so everything was directly bolt up. I had a srt8 diff and axles and all hubs assembles and calipers and rotors. Also srt8 drive shaft and lowering kit on it. Wirh a 93 Diablo tune
looking to upgrade mine as well on my 05 300c. when you bought the calippers, did it come with the brake hose as well? or had to buy seperate? was it a direct screw on to your factory setup? cost of brembos?
Hey so they brake calipers came separate from the hose and it won’t bolt on to the factory Rt or v6 spindles. You will need to find the factory srt8 hub spindles for it to work. And the calipers was about 100$ each at the auto parts store.
@@mattsauto6462 thank you for getting back man. been looking to do this for a while but could never find a good thorough video. thank you. keep up the good content.
Damn, I wish you would've shown the part numbers and if the rt rotors and calipers could fit on there.... Sub to my channel too for some first gen content coming very soon
Alot of work!! Great job youngster!!! Gotta keep at it ,,anything worth having takes time!!
I appreciate it my man, it’s been a long journey with this car
Been wanting to switch to some brembos and this helps to do it my self 👌🏻
Hellyea bro I hope the transformation goes well 🙏🏽
Good video bro. Helping me piece together the parts. Thank you.
No problem. I’m glad it helped you
That boy got them brembos 👀😏
Yes ma’am ❤️you already know
Us Six Pot Folks have our own issues lol.
They sell brembo high temp decals on amazon.
Bet man I need some
Where you get the brake hose from
Which brake hoses were used and where can i find them?
Hey man I wanted to see where you got the hood that’s on ur yt thingy, I want to add one just like that to my charger, do you have a link ?
Nah bro I got it off a srt at the junk yard
@@mattsauto6462 Shii man lucky find haha, I might have to go to my local junk yard and look around and maybe one day I’ll be lucky too
Dat Boi Matt ‼️💪🏾
Thanks my bro🤞🏾💯
what year spindles did you get / and part number for the spindles
Stop on the dime 🔥
You already know 🔥
I thought this was a direct fit, minus the wheel offset. Why did you replace the spindle
The wheel won’t fit over the calipers with the stock spindles.
Dude, I'm doing the exact same thing. What other stuff have you done to your car?
Lucky I found alot of stuff on junk yard Cards so everything was directly bolt up. I had a srt8 diff and axles and all hubs assembles and calipers and rotors. Also srt8 drive shaft and lowering kit on it. Wirh a 93 Diablo tune
You can't use the RT brake lines on this conversion?
They won’t line up on the caliper
What city are you located in ?
We’re you get the break calipers from
From oreillys auto parts I just looked up the Srt8 version
looking to upgrade mine as well on my 05 300c. when you bought the calippers, did it come with the brake hose as well? or had to buy seperate? was it a direct screw on to your factory setup? cost of brembos?
Hey so they brake calipers came separate from the hose and it won’t bolt on to the factory Rt or v6 spindles. You will need to find the factory srt8 hub spindles for it to work. And the calipers was about 100$ each at the auto parts store.
@@mattsauto6462 thank you for getting back man. been looking to do this for a while but could never find a good thorough video. thank you. keep up the good content.
No problem bro and I really appreciate you man 🙏🏽🙏🏽. Ima try best to to get back on track
@@mattsauto6462 🙏🙏🙏💪🏼
Do I need an alignment afterwards?
I didn’t need one on mines. As long as you don’t mess with the tie rod ends your good
Do the bigger piston calipers work with the same master cyl. and brake booster?
Yessir they do
Can I put brembos on my awd charger
Yes but you may have to get some jeep Srt8 spindles because your cv axles go thru your hubs
What year's srt8 spindles work for pre eagle?
Any srt8 up to 2010 the ones on my 2007 charger came off a 08 300
Is it the same process for a magnum rt?
Yessir same thing
Did you swap the rears also?
If so is it the same process?
Yessir it’s the same exact process, you have to have the Srt8 rear spindles too.
We’re you buy the brake calipers from new ?
Oreillys
how much were they new ? i got the 4 pistons off someone for a killer deal so now i want to buy the 6 pistons for the front
@@mattsauto6462 you bought brembos at oreillys?
About 105 each
As yessir
What hoses did you get?
06 charger Srt8 hoses
@@mattsauto6462 where did you buy them from? or were they taken off a srt8
I got them from oreillys for factory Srt8 applications
Damn, I wish you would've shown the part numbers and if the rt rotors and calipers could fit on there....
Sub to my channel too for some first gen content coming very soon
@jpeg fern Does any years srt8 spindle work on pre eagle?