You're late do not take me anywhere having right extruder issues but the link you give does not work it ends in 584... It's like there's something after that but I can't get it anybody have the link?
Yeah, youtube didn't allow it to be clickable and cut it off. I tried editing the description and it's still there as the full link. Here it is though: www.thingiverse.com/thing:5841538
Hey man, it looks like you are having a lot more luck with your dual extruder than I am. I’m having different issues, though. I’m seeing the dreaded y axis layer shifting. Would love to hear more about your setup and what firmware you are using.
That sucks. I'm using firmware v1.15.12, but use Cura for slicing. I've been thinking about creating a video going through all my settings, and how I set up Cura for the dual extruder.
@@d1spartan that would be amazing! I’ve been using Luban but kept feeling like the issue was in the firmware. I reverted from 1.5.13 back to 1.5.12, but still have the same issue.
Just curious, did you try swapping the hot end between the two? I just received mine yesterday and discovered basically the same issues you're having. I'll try you wedge and see if that helps. Thanks for sharing.
Awesome !!! Thank you for sharing. What Snapmaker model do you have ? Is this the same dual extruder that the Artisan will have ? Please keep sharing your experience with your Snapmaker and grow the channel that way.... It is a great product but I am sure there are opportunities ......and I am getting the Artisan and I am looking forward to start using it soon. Again thanks for sharing.
This is the A350. I contemplated selling it to a friend to pick up the Artisan, but couldn't justify it after buying the 10W laser and the dual extruder. From what I know, it will be the same module for the Artisan. The main difference will be the quick change feature for the tool heads. Another video uploading now, and I'll be making another soon on PVA (dissolvable) since I've been having GREAT success with that lately. Hope your Artisan shows up soon
Hi sir. Load Luban and the try to reduce the standby temperature of the extruders to 150 degr. Celsius. That worked for me after days of tweaking and trying. Greetings from the Netherlands.
Hello, can you suggest me what can be tweaked since I am using the orca slicer, midway into the print the my right extruder stops printing and there is just gap left midway. Appreciate your help.
I printed the stl file you created and it works perfect. Thank you so much.
You are awesome for sharing your solution.
🎉🎉🎉🎉
Nice one. I replaced the pads that came with mod parts from Snapmaker and still had failures. This mod will be the next thing to print!
You're late do not take me anywhere having right extruder issues but the link you give does not work it ends in 584... It's like there's something after that but I can't get it anybody have the link?
Yeah, youtube didn't allow it to be clickable and cut it off. I tried editing the description and it's still there as the full link. Here it is though:
www.thingiverse.com/thing:5841538
Hey man, it looks like you are having a lot more luck with your dual extruder than I am. I’m having different issues, though. I’m seeing the dreaded y axis layer shifting. Would love to hear more about your setup and what firmware you are using.
That sucks. I'm using firmware v1.15.12, but use Cura for slicing. I've been thinking about creating a video going through all my settings, and how I set up Cura for the dual extruder.
@@d1spartan that would be amazing! I’ve been using Luban but kept feeling like the issue was in the firmware. I reverted from 1.5.13 back to 1.5.12, but still have the same issue.
@@d1spartan That will be great if you can share your setting. There are many of us out there that will benefit
@@bluraygeek Hey Richard what model do you have ?
@@miguelavello7493 I’ve got the A350 with upgraded rails and power supply.
Having the same issue on my left extruder. Prints for a bit the stops or the output becomes to thin to build
In Luban tweak the standby temperature to 150 degr. celsius
If you're printing in an enclosure open the doors wide and see if that helps
Hi, thanks for this. Unfortunately the link is truncated, would you please respond with the link to the file here s well?
Sorry about that. Let's see if this works:
www.thingiverse.com/thing:5841538
Just curious, did you try swapping the hot end between the two? I just received mine yesterday and discovered basically the same issues you're having. I'll try you wedge and see if that helps. Thanks for sharing.
I didn't specifically swap the hot ends, but I'm sure I have inadvertently done that after cleaning and try to get them unclogged.
Anyone have a model for print the spacer? Same problem here
Link is in the description to the spacer I made
@@d1spartan not working for me. Found another
Awesome !!! Thank you for sharing. What Snapmaker model do you have ? Is this the same dual extruder that the Artisan will have ?
Please keep sharing your experience with your Snapmaker and grow the channel that way.... It is a great product but I am sure there are opportunities ......and I am getting the Artisan and I am looking forward to start using it soon. Again thanks for sharing.
This is the A350. I contemplated selling it to a friend to pick up the Artisan, but couldn't justify it after buying the 10W laser and the dual extruder. From what I know, it will be the same module for the Artisan. The main difference will be the quick change feature for the tool heads.
Another video uploading now, and I'll be making another soon on PVA (dissolvable) since I've been having GREAT success with that lately. Hope your Artisan shows up soon
Hi sir. Load Luban and the try to reduce the standby temperature of the extruders to 150 degr. Celsius. That worked for me after days of tweaking and trying. Greetings from the Netherlands.
The fix for me was to open the enclosure
Hello, can you suggest me what can be tweaked since I am using the orca slicer, midway into the print the my right extruder stops printing and there is just gap left midway. Appreciate your help.