Це відео не доступне.
Перепрошуємо.
Ford Bronco Flat Tow Wiring Harness Installation | 2021-2023 CURT 58996
Вставка
- Опубліковано 17 сер 2024
- Want to flat tow your Ford Bronco behind your Motorhome? In this video we are installing a flat tow wiring harness so the lights work while the Bronco is being towed. This Bronco did not have the factory tow package, so we had to piggy back this harness on the aftermarket trailer wiring harness. It seems to be working so far...
Link to previous receiver hitch wiring harness video: • 2023 Ford Bronco Trail...
Product Links 👇 👇 👇
3/8" Anti Chafe
amzn.to/3ox2J9u
Adhesive Lined Shrink Wrap Kit
amzn.to/3WG2CoQ
Curt 58996 Wiring Harness To Flat Tow Ford Bronco w/o LED Taillights
amzn.to/3SF7usg
Curt 13493 Ford Bronco (Excluding Factory Receiver) Class 3 Trailer Hitch w/ 2in Receiver
amzn.to/3MU3qTI
CURT 56471 4-Pin Trailer Wiring Harness, Fits Select Ford Bronco, Black
amzn.to/3ZgrfZx
Hopkins 48480 Endurance 7-Way Tow Vehicle End Socket
amzn.to/3KQWFkX
Body Panel Clip Removal Tools
amzn.to/41H7g7Q
Was this helpful? Send a Thanks by clicking the ... below the video!
Want me to review your unique fishing, travel or outdoor product? roadandreel.co...
Join this channel to get access to perks and free stuff!
/ @roadandreel
My Fishing Gear:
Shop Ventures Fly Co amzn.to/3nRzwD4
Redington Classic Trout Fly Rod amzn.to/2Sbkues
Redington Zero Reel amzn.to/3xvaIms
Scientific Angler Floating Fly Line amzn.to/3xugogp
Scientific Angler Dacron Fly Line Backing amzn.to/35tvMOd
Rio Fly Line Leaders amzn.to/3cOyn9r
Echo Base Fly Rod Kit amzn.to/3vAH6Cz
Mountainsmith Lumbar Day Pack amzn.to/3iP79Dp
Fly Fishing Landing Net amzn.to/3gHapht
My Trailer Gear:
ADCO Trailer Cover: amzn.to/3jKEuj0
Blackstone 22” Griddle W/Hood & Stand: amzn.to/2WU9CUj
Blackstone Griddle Accessories: amzn.to/3zS9TWd
Trimax Coupler Lock: amzn.to/3DUN9qX
Heavy DUTY Security Cable: amzn.to/3DKqopE
Amazon Masterlock Store: amzn.to/3BPbIUi
00:00 - Intro
01:10 - Bronco Flat Tow Wiring Harness
01:40 - Connecting Bronco Flat Tow Wiring Harness To Factory Tail Light Harness
02:41 - Routing The Flat Tow Wiring Harness Around Back Of Ford Bronco
03:23 - Not Necessary Unless You Are Also Installing A Trailer Wiring Harness
04:01 - Routing The Flat Tow Wiring Harness To Front Of Ford Bronco
06:55 - Outro
*Disclaimer: This video and description may contain affiliate links where, if you buy an item through the link, I receive a small commission at no additional cost to you. This helps support this channel so I can continue to make more videos like this. Thank you for your support!
Did you notice that once you connected to the towing vehicle if the brake lights illuminated when the brakes were applied on the Bronco? I used this same harness on my Bronco and when I apply the brake pedal on Bronco it lights up the lights on my RV. I reached out to Curt and they say that the diodes in the harness is meant to protect the towed vehicle but not intended to stop back feed to the RV lights.
Wow, I didn't notice but that's very interesting. I guess it makes sense since diodes only work in one direction. Are you using surge brakes on your Bronco to where it would cause issues with the lights on your RV?
@@RoadandReelI’m using the Blue OX Patriot. I’ve only drove it a short distance so far to test everything once I had installed everything. I haven’t had issues yet.
What about Bronco's with LED taillights?
Is it possible to wire for both towing a trailer and being flat towed?
Curt SKU CM-58992 makes one for LED lights. At the time of this video, they were hard to find, but there are led specific harnesses now.
Can you show inside the fuse box how you connected power?
You can follow the link to my other video here ua-cam.com/video/gU9pys_rqr8/v-deo.html
I start wiring power around the 15 minute mark, but that's for the trailer harness. I won't have this setup complete until this weekend when I built my tow bars. Video should be out next week sometime.
Thanks , I used the blue-ox system was very quick to install and hides well.
@@carls241 that's good to know. Thanks!
Hey! What size anti chafe, split lume and shrink wrap did you need?
I used 3/8" for the anti chafe and 1/2" shrink wrap. I used the adhesive type on the end to keep it from pulling off. If you aren't running both harnesses like I did to the front, you can probably get away with smaller shrink wrap.