PS4 SLIM NO OUTPUT TO TV - NOT HDMI PORT!!

Поділитися
Вставка
  • Опубліковано 10 тра 2023
  • This was an interesting fix, watch as I take you through the diagnostic process to understnd where the fault is with this Playstation.
    Book a Repair here: www.rocket-repairs.co.uk/yout...
    Facebook - / rocket.repairs.southam...
    Instagram - / rocket_repairs_southam...
    #Microsoldering #soldering #repair #ps4repair #playstationrepair #playstation #consolerepair
  • Наука та технологія

КОМЕНТАРІ • 21

  • @TheSkaldenmettrunk
    @TheSkaldenmettrunk Рік тому +2

    The fault finding was very good. Even this wasn't the only fault. Great one!

  • @ToltecMerc
    @ToltecMerc Рік тому +3

    The 5-legged component on the back was probably ok. The reason for the difference in diode readings is that the components you were comparing were not identical. I'm sure the two components do the exact same thing, but the manufacturer will use parts from various vendors as needed. You may have noticed the part numbers did not match. Slightly different parts, slightly different diode readings.

  • @games4lifeyu-gi-oh880
    @games4lifeyu-gi-oh880 Рік тому +5

    Was my PS4 lol. Thank you for the repair

  • @NowInAus
    @NowInAus Рік тому

    Hmm.. interesting diode behaviour. Great detective work, again

  • @frozerinosrepairs
    @frozerinosrepairs Рік тому

    Thank you for sharing

  • @djm9937
    @djm9937 Рік тому

    Great Job :)

  • @ajaks7636
    @ajaks7636 Рік тому

    Excellent! 😁

  • @vlatkokiefer1396
    @vlatkokiefer1396 Рік тому

    Nice job. An unrelated question: what type of iron tip do you use? This one looks pretty big! T245? Tnx

  • @imaginitivity7853
    @imaginitivity7853 Рік тому

    What i always find surprising about the professional use of hot air is that i thought components shouldn't be heated too much to avoid damage. I've especially heard hdmi chip failures are due to excess heat/poor cooling, so the risk seems greater. Even to the extent that putting heat sinks on these is advised to prolong life.

  • @der-andyman
    @der-andyman Рік тому +1

    Great job mate, most people would just have changed the encoder and after still not getting an output, deem it a "no fix", I guess.
    By the way, what microscope are you using? The image quality is very good. I would like to buy one :D

    • @rocketrepairs
      @rocketrepairs  Рік тому +1

      IMX 385 sensor good in low light.

    • @der-andyman
      @der-andyman Рік тому +1

      @@rocketrepairs Ok thanks. But wow, it is much more expensive than I thought 😮

  • @icanic
    @icanic 9 місяців тому

    Greetings!
    Did the pin 3 still read as ground?

  • @jarioostvogels8764
    @jarioostvogels8764 Рік тому

    What ticket system are you using?

  • @Zakriya_QURAN_Network
    @Zakriya_QURAN_Network 5 місяців тому

    Sir I lost one of those 4 tiny component behind the HDMI port
    So what is the solution for that
    Please help

  • @gravedigga71
    @gravedigga71 Рік тому

    I have the exact same problem on a PS4 Pro board atm. So your solution should also fix my fault. 😊 What exact type of transistor is this? Because i don't have a donor board.

  • @bojidarandrov3612
    @bojidarandrov3612 Рік тому

    What microscope are you using

  • @jacobgrieco8982
    @jacobgrieco8982 8 місяців тому

    Why tf are all these vids sped up

  • @dkaytan
    @dkaytan Рік тому

    First

  • @josephneale10215
    @josephneale10215 Рік тому