ELEGOO Neptune 4 MAX (Plus) Y Axis Upgrade Linear Rail Installation Guide Animation Version
Вставка
- Опубліковано 23 жов 2024
- TBStron3D provides you with the simplest upgrade solution and the most comprehensive installation guide.
Neptune 4 Plus Upgrade Kit Link: strong3d.mysho...
Neptune 4 Max Upgrade Kit Link: strong3d.mysho...
Upgrade operation steps.
1.Remove the platform board and unscrew the nuts by hand, then store them for later use.
2.Remove the screws holding the central fixed heated bed and take the heated bed plate down. Store the springs and pillars for later use.
3.Remove the screws securing the synchronous belt fixing plate, and store the screws for later use.
4.Remove the Y-axis rear panel and set it aside.
5.Carefully unplug the Y-axis accelerometer.
6.Take out the Y-axis slider board from the extrusion.
7. Remove the 6 POM wheels from the slider board.
8. Attach M4*8 screws and M4 T-nuts to the long beam separately .
(For ease of viewing, the components in the Z-axis direction have been hidden. It is not necessary to disassemble the Z-axis during actual installation.)
9.Secure the Y-axis rear baffle to the profile.
10. Secure the long beam onto the profile (it is recommended to install the left side first). In the front and back directions, the distance of the long beam from the rear of the machine is 25mm for MAX and 23mm for Plus. Alternatively, use the notches on the top of the long beam and the position of the machine screws as a reference for positioning. In the vertical direction, the bottom of the long beam should be flush with the machine shell, aligning the top with the profile of the machine .
11.Use M3*6 screws to fasten the linear guide to the long beam.
12. Method 1: Attach the brass screws to the slider, then use M3*6 screws to fasten the support plate to the brass screws. Method 2: Place the silicone washers (two thick ones + one thin one) on the slider, then use M3*12 screws to fasten the support plate to the screws. Method 2 is recommended.
13.Place circular silicone washers above the threaded holes in the support plate.
14.Use M5*8 screws to secure the slider board to the support plate, paying attention to the direction of the slider board (the accelerometer should be on the left rear of the machine). First, thread the screws into the two small holes in the slider board and then install the other screws.
15.Tighten the synchronous belt fixing plate.
16. Then plug in the accelerometer's cable.
17.Reinstall the heated bed plate on the slider board, making sure not to forget the pillars and springs.
18.Install the hand-tightened nut on the fixed screws of the heated bed.。
19.Then place the platform board back onto the heated bed plate.
The upgrade is now complete. After re-leveling the machine (please refer to the official tutorial), you can proceed with printing.
Thank you.
This is a must-have upgrade for the 4max. No more messing with the bad wheels and leveling is much easier. The kit is easy to install and takes maybe 20 minutes just follow the video and make sure when you come to bag M3 6 you get the right bag because there are two bags that have the same writing but the heads are different and yes that makes a difference. I would love to get another one for my other 4max and then try one on the regular size 4's but I can't afford 9 more rails right now. But yes! This is a must-buy.
Thank you for clarifying. Yes, there is a slight difference between the installation instructions and the actual process. However, modifying the video is not easy. Perhaps we will remake the video at a suitable time.
@tbstron3d-yf9op maybe you could add a #1after the writing one the first bag then a #2 on the secound bag then it would get people to stop and look at what they are doing I write manual for the products we make and also label the bags for the parts. Just an idea.
@@MiaMia-zw5wu
Wow, thank you for your great suggestion. We will immediately implement your method on the labels of the screw package. Thank you.
Boa tarde, tudo bem?!
Vc comprou e instalou esse kit?
Vou um bom resultado final?
Uma dúvida, qual o valor do kit todo de UP grade, no site está meio confuso separado por partes
Good afternoon, what is the value of the complete Neptune 4 max kit?
I'm from Brazil and I would like the price of the complete kit, on the website it is separated by parts and axles and I was a little confused
Thanks
Hello,
The upgrade kits are available for the X, Y, and Z axes. For the option that only includes the bracket, you will need to provide your own linear rails.
For the X-axis and Y-axis, you can choose between two different brands (with varying quality) of rails, depending on your needs.
The total cost for all the upgrade kits for the Neptune 4 MAX (based on high-quality rails) is around $400. However, most customers only upgrade the Y-axis and X-axis.
Thank you.
How tight should you tighten the m8x12mm screws at 2:53 on the silicone spacers?
This is awesome!
What size are the brass inserts I lost one
Mine didn't come with the brass stand offs or the rubber washers...
Hello,
The latest version of the short Y-axis bracket has been modified. The new short bracket is easier to install and more durable, so there is no need for the square silicone pad or copper standoffs anymore.
Simply use M3*8 screws to attach the short bracket to the slider.
Thank you.
Is air express service available at extra cost?
Hello. For most countries, the total cost is the product price plus $3.99, while for a few countries, it is the product price plus $10 (or higher). This price includes shipping fees. Thank you.
Hi, where do you ship from? In case there are customs charges. Thank you
Hello. We are shipping from China. The total amount you paid includes shipping and VAT. To determine the customs duty, may I know the country of your delivery address? Thank you.
Germany@@tbstron3d-yf9op
hello same question and my country is Slovakia@@tbstron3d-yf9op
Australia
Seems to be out of stock. Do they get restocked often?
Hello. As of yesterday, the Y-axis upgrade kit for Neptune 4 MAX has been sold out. Restocked products are expected to arrive between January 20th and 22nd. Thank you for your attention.
Do you have Aliexpress store?
Hello, we currently do not have plans to sell our products on other platforms. Is PayPal not supported in your country?
I live in Turkey
@@emreengin2331 Hello, it seems like Turkey has already suspended the use of PayPal, right?