AllStar DVSwitch on Brandmeister Part 1
Вставка
- Опубліковано 18 жов 2024
- Greetings Crusaders! Here is Part 1 of the setup of a DMR Brandmeister to AllStar Bridge using DVSwitch Server. This is fascinating. Take a Look!
✅ Show Notes
✅ www.hamradiolif...
🌲 Please visit my Amazon Store for Great Ham Radio related Products
🌲 www.amazon.com...
★★★ AllStar Link Playlist★★★👉 • ALLSTAR LINK Training
✅Check out the website at www.hamradiolif...
✅HRC Facebook Page www.facebook.c...
✅HRC Instagram / ham_radio_crusader
✅HRC Twitter / hrcrusader
✅HRC Threads www.threads.ne...
📻Good Websites📻
👉Okie Archaeology okie-adventure.com
👉GigaParts www.gigaparts....
👉Ham Radio Outlet www.hamradio.com
#Ham #Radio #Crusader #kd5fmu #hamharder #hamonyall - Розваги
![Setup an AllstarLink Node from SCRATCH [for Beginners]](http://i.ytimg.com/vi/iCZsMFrVJlM/mqdefault.jpg)
Love your videos. By far the best video out here
Great videos, thanks for your time. 73
I injoy you allstar videos. They help out alot
Thank You for the kind words
You mentioned that you are using a th-9000d. Could you provide your simple USB settings for rx tx etc? I'm using the same radio and would like to see if my settings are "sane" great video!
Can you send me an email to kd5fmu@gmail.com ? And I will send you all the info I can
Hi worked well ,Great video. did you evr get around to the ysf side video as yet? mi5daw
Ironically, I am still working on that, LOL! Sometimes it;s tough just getting out of your own way. My Biggest weakness!
Thank you for posting this and the notes. I was struggling to get everything to work. There were multiple things I missed in the documentation that your video shows and text in the rpt.conf file. It is working...now what to do with it. :)
Dropping a new version for TGIF a week from this Tuesday FYI
I moved from Florida to NY. I had setup my PI3b working on allstar in Florida, but could not get it to work in NY on a different internet system.
Recently a friend turned me on to use DVSWITCH in web transceiver mode for allstar which allows me to access allstar nodes directly, without fussing over Raspberry Pi hardware and configuration, and I am able to access Allstar sites that allow Web Transceiver Mode.
I have not been able to ask my friend who lives in PA this question: Can you work the other modes like DMR and Dstar, etc in Web Transceiver mode? If so, how do I configure DVSWITCH to do so? Trying to eliminate the need for Droidstar to run DMR if I can do the same with DVSWITCH.
If I get an answer to this question if you do not know, I will share it here. TNX and 73's
WB2EVX, James
New subscriber here. Saw you on Coffee & Ham Radios channel.
Thanks for stopping by. 73 DE KD5FMU
Have you done a video for TGIF, I can’t seem to get it to work. Great videos.
Coming Soon actually
Will the end result of this procedure allow for controlling the digital modes with my radio? For example changing talkgroups? Is this demonstrated anywhere in the video? Thanks.
No, this is just a bridge to a particular talk group of your choosing and it remains static.
@@HamRadioCrusader I currently have a Shari node with DVSwitch Server installed and working nicely with DMR and YSF that can be controlled by the DVSwitch Mobile app on my Android. I'm told the control point can be your radio too (app OR radio, not both at the same time)....do you know where I could fine concise info on this subject as you've presented yours? Great videos btw!👍
@@frankiorio7143 when you find it, let me know 😊 Meanwhile, I would LOVE to see your config files for the YSF connection. I can not seem to get mine to work. Can you share your knowledge with me? Contact me kd5fmu@gmail.com
Can you do a video on Allstar Web Transceiver mode? The guys would love it!@@HamRadioCrusader
ua-cam.com/video/DK6Bd3XQKc8/v-deo.htmlsi=ZHfNU2V5im4lzymQ
You should point out that's the HamVOIP version of Allstar, rather than ASL. Just because there _are_ differences in a few configuration settings, features, etc.
Will DVSwitch work with Supermon 2, I’ve just installed it successfully from your other video? Thanks 73.
Absolutely!
Thank you.
Thanks for the video. Is work with Supermon2?
Yes
@@HamRadioCrusader Is it the same process? Happy new year
@@W4wet Yes
what config changes should be done if you are using port 4567 instead of 4569 for your node?
Just follow the video and make sure you have that new port forwarded to your AllStar node in your router.
when attempting to bridge my node and 1999 it attempts to connect showing in orange and then quits. do you have any idea what could be the problem? i normally use supermon2 to control my node
Check your AST Log and Linux Log for obvious errors, also Are your changing the main drop down node selector to the private node? i.e. 1999 and then typing in the main node number into the text window and then trying to connect?
yes i did on the changing to 1999 before connecting to my node. I will check error logs and see what i come up with.@@HamRadioCrusader
[Sep 19 16:41:59] WARNING[433] app_rpt.c: Node 1999: Reconnect Attempt to 596950 in process
[Sep 19 16:42:03] NOTICE[403] chan_iax2.c: Auto-congesting call due to slow response
[Sep 19 16:42:18] NOTICE[415] chan_iax2.c: Auto-congesting call due to slow response
The document is gone!
Try this link…
www.hamradiolife.org/documents/DVSwitchonHamvoipAllStarTGIF.pdf
@@HamRadioCrusader I have configured it and it won't connect to 1999
@@ON3PLZ are you using a non-standard port different than 4569 ?
@@HamRadioCrusader yes 4570
There really needs to be a script to do the setup of a complete allstar node, it's too unrefined all this linux nonsense, some people might love endlessly tryping commands, I don't lol.
But thanks for your effort, it's being a big help !
Is there a part 2 yet?
Not yet, still researching
@@HamRadioCrusader thanks!
has anyone attempted this install on a cloud server?
Not that I am aware of, but I am sure someone has
ham radio 2.0 did. There's an video about it.
@linkfordorender3643 Absolutely! Several of our hubs are running on Vulture and elsewhere.
"promo sm"