Improve Your Dryer's Efficiency! How to Upgrade Your Dryer Venting System | PartSelect.com
Вставка
- Опубліковано 5 жов 2024
- Upgrading your dryer venting system can not only make your dryer more efficient, but it can also make it safer, and even make it look a little better too! In this video, Steve will take you through the process of replacing that old dryer vent system, with a new, upgraded one, so you can start reaping these benefits in no time!
If you have any questions about the Dryer Vent Upgrade process, feel free to leave us a comment below! If you have any tips that you've found have worked in your previous repair jobs, feel free to share those with us as well! 👇
Simply want to clean your vents? Here's how to do that: • Dryer Troubleshooting:...
*****************
Find this video helpful? Hit the LIKE 👍 button, and don’t forget to SUBSCRIBE to our channel for more help with your appliances!
Leave us a comment below and let us know what video YOU would like to see us do next or ask a question about your appliance!
More Dryer-Specific Repair Videos can be found on the Dryer Repair playlist on our UA-cam Channel: • Dryer Not Drying Cloth...
For more help diagnosing your Dryer problems, or to find an instructional video that is specific to your model, visit our website at: www.partselect....
At PartSelect.com, we have thousands of replacement parts for a variety of household appliances. We specialize in OEM (Original Equipment Manufacturer) parts, so you can rest assured that your part will fit with your model appliance.
PartSelect.com is committed to providing you with high-quality parts, quickly and easily. Buy with confidence by learning about our Same-Day Shipping, Secure Shopping, and 30-Day Return Policy on our website.
www.partselect...
www.partselect...
www.partselect...
At PartSelect, we’re here to help at every stage of your repair. Our friendly Customer Service Representatives are happy to help with any questions you have about your repair, your appliance, or your replacement part. Visit our website to try our new LIVE CHAT feature or speak to one of our representatives over the phone at 1-888-260-4310.
Visit Us on Social Media!
/ partselect
/ partselect
www.pinterest....
You were the most helpful of all the videos. I was having problems with the connection directly to the back of dryer and you were the first one to even show the connection. Thank you.
check out the Magvent. Great solution!
Steve your the best I've been watching you for two or three years and you remind me of HOUDINI THE MAGIC IS ALLWAYS A GREAT PEROFORMANCE.THANK YOU FOR YOUR F HELP. GOD BLESSYOU AND YOU FAMILY, HAPPY RETIREMENT
What about the dryers exhaust pipe, what no clamp ?
Great video, once again I've watched your GE dishwasher repair videos, i've ben able to save hundreds of $$$ doing my own work, and finding the parts. Thank you, very much.
Can’t tell this guys from Canada. 😂 Ooutlet! He can’t hide it he’s trying though!
Great Job. Thanks. John in Ohio
Excellent job Sir
what do you do when you need to pull dryer out
I appreciate your video. I am very curious as to how you will be able to line up the dryer to the rigid connection when servicing it in a tight space that you can't trust a perfect alignment. I'm doing a home remodel and am concerned for the best connection but "flexbility" required when cleaning/servicing the dryer in tight quarters.
Great video and instruction but very "Easy" project. My dryer has NO room around it and is vented straight down to crawl space and out therefore you have to pull the dryer "all the way out" to get behind it to work on the vent tube...which HAS to be "flexible" Huge Hassel!
Sorry I was incorrect after watching again I seen that is was done correctly !!
With everything taped together does that make it harder to clean?
Great job Steve!
Nicely done, like it.
So tidy ! Well done ! So what happens to the ductwork when you want to pull the dryer out ?
You unscrew the Clamp holding it in place over the Duct-work coming from the dryer, and then pull out the Dryer...
There’s no clamp directly to the dryer?
I insulated mine with that foil faced bubble insulation after I installed it.
Instead of using that short 90, might it be better to use 2 45 elbows or a long radius elbow? Then you do not need to add the short extension.
What about taping the fitting that goes directly into the dryer? Do u just leave that in snug fit ?
great video
I would be concerned that the dryer does not have enough pressure to exhaust the lint to the outside. Other than that, looks good.
I use PCV pipe. Tight fit, mouse proof, & stays cleaner. Fire threat? I run solid aluminum coming out the dryer to the wall.
Never use galvanized metal it cools down the hot moist air ,& then lint sticks to it ,use rigid aluminum, which stays hot ,dryer vents shouldn't exceed 12 ft. subtract 2 ft for each 90 degree bend
code says 25' last I knew and 90 counts as 5'
@dmaxrobful Manufacturers say 10 - 12 ft in a straight line subtract 2 ft for every 90 degree bend so I don't care what code says
The crimped end of the pipe should always be on the end facing the exit or you will be collecting lint at that connection point. Your extension pipe was reversed
it would be good to put your correction here, if not able/willing to delete the incorrect comment.
Is this fire safe. Question: What if your laundry room is in the middle of your house. (no basement, no windows) what venting system would you recommend
You need a vent booster possibly more than 1 & plan on cleaning at LEAST 3 times a year , whenever possible design your laundry area to be close to an outside wall , you are basically going to have venting issues FOREVER, & the lifespan of even the best dryers will be cut in half or more
Get a Heat Pump Dryer. Check with your Utility, some are offering pretty good rebates on Heat Pump Dryers.
I've been repairing appliances for 40 years, WHAT'S a heat pump dryer ? Sounds like something the EU is going to try to force on the rest of us again, you guys get attacked again & there's a draft to come to your rescue, don't count on U.S. showing up
Wrong tape. Ul 181 tape is the only tape you can use. Tape should say ul 181 in red letters printed on it. Do not use screws and make sure the male duct ends are facing the discharge direction. Most mecanical code now says 35 ft max length or dryer manufacturer specs. Most dryers allow for more than 35 ft.
Great video to learn how to use aluminum pipe ducting.
BTW, I don’t understand why a little bit of collection of lint in the corrugation of the old pipe would hinder the dryer exhaust. 4” diameter is plenty to pump the air out.
Please clarify what will happen with your solution of hard ducting when the dryer moves a little bit because of vibration?
There is more resistance in corrugated aluminum or flexible ductwork than hard pipe.and lint can build up easier and faster due to that resistance and it is a fire hazard.Smooth pipe has less resistance.White flex like you see on many old dryers breaks down over time due to heat and humidity.the aluminum corrugated flex actually has a seam on it that leaks moisture,If you pull on it,You can see the seam as it unravels ..
He did a bang up job on that dryer vent..Some other people would have used screws or rivets on the joints to secure the pipe together But,He knows that it would catch lint and dust which would impede airflow and be a fire hazard..Most cities and counties will not allow mechanical fasteners to be used on any vent pipe...If you have a dryer that is hopping or wobbling on the floor that causes the vent to disconnect you have a serious problem.dryers are stationary they have a tumbler..You are thinking of a washing machine
A dryer vent should be blowing like a jet if it’s not then you know you have a problem
The water heater behind you needs an upgrade, it’s not up to code.
Great work. I recommend a squeegee on all the tape vs just your hand. I really want to understand and see serviceability. Please describe (and preferably show) pulling the dryer out and then pushing it back in to its final position. Is there tape/or a clamp? How do you get enough flex/wiggle in a ridged duct install to get to the attachment? Or do you just leave the dryer floating in the next elbow with 10% leakage?
That's always been my issue with ridged, can't pull drying out or put it back and have room to put the end back on. This is why flex is so popular even if you do lose a little air flow.
Father McMahon?
Hahaha did you say this because of his collar
Now a days they make rigid 90 deg connections just for this problem
Sorry, Mr DIY - you should NEVER rely on tape to hold ductwork together! You misses the most critical part of the job, installing self drilling 1/4" sheet metal screws to hold the duct sections/fittings/dryer outlet together. Your welcome for the Free tradesman advice. You are also using the sheet metal shears wrong, you always cut around the outside of the pipe, NOT around the inside.
Screw tips catch lent
All that tedious work and you didn't clamp the ends! Why?
Foil tape is more secure, and the dryer with wall hold the final connection securely.
Cleaning this vent will be a nightmare with all the elbows. A much better configuration is connect the vertical duct directly to the dryer with any UL-listed flexible transition hose.
If u look at ur dryer manual they recommend this type of setup with the 45 degree Bend
It won't be difficult at all with a dryer vent cleaning tool
What about the dryers exhaust pipe, what no clamp ?
@@Bailey-y9bIf it’s pushing against the wall, don’t need a Clamp.
You didn't show the skinny Ethiopian dude with really long skinny arms tightening the vent to the back of the dryer up snug against the wall. 🤣
He's obviously a plant from big Foil Tape. Trying to boost Foil Tape sales, no sir. I will stick to my all american duct tape, the proper tape for these applications.
Are you kidding? Do you know how much of a pain in the ass duct work is? The flexible tube is much more efficient
Flexible is more efficient, in terms of minimizing installation time. But for minimum lint that gets trapped in the duct, rigid is more efficient.