Just got the Huey H1 V3 and was getting the flashing red light, had no idea the compass needed to be calibrated first as the GPS models are supposed to not need it. Thanks so much mate she now flies!
You did a fine job on explaining calibration procedures for the FW450 Helicopter. The one thing I would include in your explanation is, and it's important...when enabling low battery RTH in the program, remember to advise caution with this setting. If the Helicopter is flying UNDER and obstruction, when activated RTH, the Helicopter does not have obstacle avoidance, and will fly (crash) into the obstruction (wire, Tree). You ask? How do I know this? ha ha!
I have done the same thing my friend. Lol. More experienced people would already know this probably but not an inexperienced person. That's a good suggestion
I ordered one yesterday and was wondering about that, nobody ever mentioned obstacle avoidance so I kinda assumed that was the case. Sounds like I should leave it off because I plan on flying around the yard with it and it sounds like it could get me in trouble. Thanks for the tip!
waiting for mine now!!!!.....cant wait to get it!!!! ...I have already downloaded the software with no problem...want to make sure the inverted switch is on and on easy mode....great video!!!.....thank you
Hi again . I noticed when I flip the stick is not reverse how do i reverse the stick. Normally when invert the down stick heli will go up and the up stick heli will down
Ok I was told to get the 1.9v to download on FW website you have to disable your computer protection and then download it. When you are done turn your protection back on. It worked for me and only took about 20 minutes.
Okay I just received my FW450 V3 AirWolf that I ordered from MotionRC. Do I need to do this on my brand new helicopter right out of the box? Also can the FW450 V3 scale helis actually fly inverted? Or is that a bad idea to attempt with a scale heli?
Hi, im fully registered. Drone pilot and i want one of theses Fw450's i have a few questions for you how long does the batteries last in the controller. Can you plug a battery pack into the controller Whats the plug underneath the controller. It looks like a printer plug do you have to calabrate every time you go to fly would it be ok to put normal AA batteries in or put Rechargeable ones in i am new new to this i want to up my flying experience would 1.2 volt AA be alright for the controller or does it need more Volts any help would be nice
I have 4 standard 1.2 volt AA batteries in mine. You can buy rechargeable AA's if you would like. I'm not 100% sure what the round port in the bottom of the transmitter is...I think it's a data cable for updating if you wanted to do that. Then there is a micro USB port to the left of the round port and I think that is for charging if you did decide to go rechargeable AA batteries. The transmitter lasts a very long time on a 4 set of disposable batteries. Probably like 10 flights or so. All of the info your requesting will be in the instruction manuals that come with the fw-450 if you happen to forget. Thanks for watching and messaging.
Bravo...!! Ti ho seguito e son riuscito perche sottotitoli in Italiano....spiegato bene io mentre lo facevo ho collegato trasmettitore....non so se andava fatto ma tutto ok e ho aumentato trotter da 75% a 80% ciao
h Helped my neighbor with this so he could enable inverted flight and after downloading the software, doing the gps dance and turning on inverted fight, the gps will not sync to the copter. Tried gps dance again, clearing gps, factory reset with RX reconnect and no joy!! Gps blinks green but copter blinks yellow. Unplugged/replugged gps from copter, no joy!! Searched for gps not connecgting to fw450v3 but no help. Thinking I might try a firmware upddate but thought I would reach out for ideas before moving forward,
Yes, I have already made a follow up video explaining why I used this download. For some reason my computer would not download the software from flywings web site but i had no issue downloading from heli-directs website so that is why I used this software. It actually worked just fine for a simple Gyro Calibration though. My heli was able to fly/hover perfectly fine using this software to calibrate. The very next day I was able to reset my PC and download the correct software for the V3. If you would like to see that video it is the very next one on my channel. Thanks for the concerns. Thanks for watching and commenting.
Yes I have been told that, for some reason I could not get the info to software to download from the Flywing website. I had no problemd with the software on the heli direct website.
Thanks for the info though. Thanks for watching as well. Fortunately the software works just fine for compass calibration and my helicopter seems to work great.
Just got the Huey H1 V3 and was getting the flashing red light, had no idea the compass needed to be calibrated first as the GPS models are supposed to not need it. Thanks so much mate she now flies!
I'm glad you got the ol (new) girl in the air.
You did a fine job on explaining calibration procedures for the FW450 Helicopter. The one thing I would include in your explanation is, and it's important...when enabling low battery RTH in the program, remember to advise caution with this setting. If the Helicopter is flying UNDER and obstruction, when activated RTH, the Helicopter does not have obstacle avoidance, and will fly (crash) into the obstruction (wire, Tree). You ask? How do I know this? ha ha!
I have done the same thing my friend. Lol. More experienced people would already know this probably but not an inexperienced person. That's a good suggestion
I ordered one yesterday and was wondering about that, nobody ever mentioned obstacle avoidance so I kinda assumed that was the case. Sounds like I should leave it off because I plan on flying around the yard with it and it sounds like it could get me in trouble. Thanks for the tip!
@@nickarganbright7218 You plug it into the lipo and leave it inside the helicopter while flying. Believe me, you will be able to hear it while flying.
@@jeffkraus1457this is very true. I can here mine with no problems what so ever 👍🏼
waiting for mine now!!!!.....cant wait to get it!!!! ...I have already downloaded the software with no problem...want to make sure the inverted switch is on and on easy mode....great video!!!.....thank you
Sounds like you got all the right plans set for a beautiful 1st/maiden flight with your 450 when it arrives.
Thanks for making the video it help me alot
Glad it helped
Hi again . I noticed when I flip the stick is not reverse how do i reverse the stick. Normally when invert the down stick heli will go up and the up stick heli will down
Hi have you ever Loose signals
Incredible explanation. You made it so easy to understand. Hats off to you
Excellent instructions
Ok I was told to get the 1.9v to download on FW website you have to disable your computer protection and then download it. When you are done turn your protection back on. It worked for me and only took about 20 minutes.
Hello friend, do you know what these two cable entries on the bottom of the radio transmitter are for?
I can't see the 2 entries your talking about.
@@myrclifeyou find out out if you google the fs i6s manual instructions. The ports are usb port for simulator and ppm output port 👍🏼 nice video bud
Thank so much, always success
Thanks for watching and commenting.
Okay I just received my FW450 V3 AirWolf that I ordered from MotionRC. Do I need to do this on my brand new helicopter right out of the box?
Also can the FW450 V3 scale helis actually fly inverted? Or is that a bad idea to attempt with a scale heli?
I'm not sure on the inverted question. I would calibrate it just to be safe.
Hi, im fully registered. Drone pilot and i want one of theses Fw450's i have a few questions for you how long does the batteries last in the controller. Can you plug a battery pack into the controller Whats the plug underneath the controller. It looks like a printer plug do you have to calabrate every time you go to fly would it be ok to put normal AA batteries in or put Rechargeable ones in i am new new to this i want to up my flying experience would 1.2 volt AA be alright for the controller or does it need more Volts any help would be nice
I have 4 standard 1.2 volt AA batteries in mine. You can buy rechargeable AA's if you would like. I'm not 100% sure what the round port in the bottom of the transmitter is...I think it's a data cable for updating if you wanted to do that. Then there is a micro USB port to the left of the round port and I think that is for charging if you did decide to go rechargeable AA batteries. The transmitter lasts a very long time on a 4 set of disposable batteries. Probably like 10 flights or so. All of the info your requesting will be in the instruction manuals that come with the fw-450 if you happen to forget. Thanks for watching and messaging.
Bravo...!! Ti ho seguito e son riuscito perche sottotitoli in Italiano....spiegato bene io mentre lo facevo ho collegato trasmettitore....non so se andava fatto ma tutto ok e ho aumentato trotter da 75% a 80% ciao
I'm upgrading my GPS antenna to the new M10 version. Do I need to calibrate the new GPS antenna and if so, how do I do it? Thanks for yer time.
I'm unfamiliar with the m-10 version
Toll erklärt! thank you for explaining!☝
No problem
Does this controller recognize rx Tbs crossfire? good night
I'm not sure
Do u still have to gyro calibrat it from out the box I was told u don't have too like
I don't think you HAVE to calibrate it out of the box. I flew mine twice before I calibrated it. I would recommend calibrating it though.
h
Helped my neighbor with this so he could enable inverted flight and after downloading the software, doing the gps dance and turning on inverted fight, the gps will not sync to the copter. Tried gps dance again, clearing gps, factory reset with RX reconnect and no joy!! Gps blinks green but copter blinks yellow. Unplugged/replugged gps from copter, no joy!! Searched for gps not connecgting to fw450v3 but no help. Thinking I might try a firmware upddate but thought I would reach out for ideas before moving forward,
I'm just going to be honest with you, Im not a big heli guy. I don't know a lot about them. Sorry I couldn't help more.
The latest software is 2.0 Have you down loaded it and try it out
One Mini USB and one DIN input located on the bottom of the radio
I can not get on Flywings web site either to down load the 1.9v Something is going on with there site.
This is the incorrect download for the V3,the V3 uses the H1 Lite ,Not the H1 Heli ,this is incorrect information 😮
Yes, I have already made a follow up video explaining why I used this download. For some reason my computer would not download the software from flywings web site but i had no issue downloading from heli-directs website so that is why I used this software. It actually worked just fine for a simple Gyro Calibration though. My heli was able to fly/hover perfectly fine using this software to calibrate. The very next day I was able to reset my PC and download the correct software for the V3. If you would like to see that video it is the very next one on my channel. Thanks for the concerns. Thanks for watching and commenting.
@@myrclife There is no gyro calibration,you are calibrating the GPS system
I meant to say compass, or GPS. Thanks for the correction.
This is for the last two comments left for wrong post why don’t you post the right link download on your comments here 😂😂😂😂
Good point Jessy
You need to use 1.9v your using OLD INFORMATION.
Yes I have been told that, for some reason I could not get the info to software to download from the Flywing website. I had no problemd with the software on the heli direct website.
Thanks for the info though. Thanks for watching as well. Fortunately the software works just fine for compass calibration and my helicopter seems to work great.
Thank you for this vidéo its very cooool because in few weeks i Will bying this wonderful rc helicopter des toi soon for anither vidéos brunodu66
I'm glad it served you well. Good luck with your new helicopter, you will love it.