As an extruder manufacturer, I must say it's really helpful, sometimes we need to explain to customer how the extruder works, but it will be easy to understand if they look this.
It tells us the basic flow of material conveys, but copolymerization is a thing that needs to adjust many of the elements in a stable state. Basic elements include pressure, temperature, and time.
You can turn it on again depending of the type of polymer that was in the screw and cylinder. Some low melting temperature material like PVC tend to burnt and you'll get more problems if trying to obtain a decent product
I have a small extruder and the entire barrel moves in a circular pattern maybe 1-2mm or so - which makes it very difficult to maintain tolerances on the product extruded. I thought it was due to a screw that was broken and repaired and assumed might not be 100% straight, but the same thing happens also with a new screw... what could be the cause? The motor and the gear box? A bent shaft that connects to the screw? Maybe the extruded not being level properly on a hard surface (it is on a wooden pallet)? A bent or worn out barrel?
I know my comment may be a little late but sounds like you need to level out your barrel and make a mount on the front of the barrel and the rear of the barrel.
respected sir , i need your mentorship and gauide i am making a project for my client but he is demanding from me to show animation like this i mean to show him transformation of plastic into fluid sir its humble request with you .Would you please suggest me a software or tool which can this type of animation as you have show this animation is pretty awesome.
Your Videois an exerpt from our Extruder Operation and Control - Single Screw: Lesson 1 course. This program uses state-of-the art animation technology to teach the fundamentals of single screw technology Very Useful Sharing
Can anyone help me, i have issue on plastics recycling extruder. When i run hdpe material production is like 3 ton for 12 hrs but for PP material flow slow down and maximum production is 2 ton.
i am maintenance engineer in woven sack industry and also involved in erection of woven sack industry mail me if any interested work or join us-kultarsingh6@gmail.com or call +918954534744
hi, i have extruder machine and i have sheet thickness problem usually on the right side of the sheet is 3 mm and the left side of the sheet is 2.6mm. anyone can help me ?
Hello Parmar, we are the manufacturer of thermoforming making machine, you can add my Whatsapp: 0086 13386456156 so I can send more running vedios to you, tks
As an extruder manufacturer, I must say it's really helpful, sometimes we need to explain to customer how the extruder works, but it will be easy to understand if they look this.
So simple and so satisfying. It is always a good to see such a process that is directly connected to the basic principles of physics.
This is my favorite process. So simple yet so effective.
good evening sir show me how to t Dai sheet extruder Pp ps material penal hidar cantroel sir
i am going to both operate and control every single extruder i come across now
Thank u from Algeria ❤
used to work at wavin plastics on extruders we had top and bottom twin screws to start making plpes in 1973
It tells us the basic flow of material conveys, but copolymerization is a thing that needs to adjust many of the elements in a stable state. Basic elements include pressure, temperature, and time.
nice video...gives a good explanation of the single screw extruder.thanks
You can turn it on again depending of the type of polymer that was in the screw and cylinder. Some low melting temperature material like PVC tend to burnt and you'll get more problems if trying to obtain a decent product
Juan Ravines Lonzoy hi can i ask you some questions on extrusion
You can turn it off then set a time to heat again. You have to set 2 hours to run again for production.
thanks, it was very useful. i always study these things just theoretically
Great job showing how the extruder works, it's awesome🌹🌹🌹
Thank You. This was very helpful. I wonder how they generate so much shear heat...
turning from the screw generates pressure which translates to heat
Thanks I learned a lot
How will the rotation of the screw be in the extrusion process or in the injection process?
so cool and claify to show how the extruder machine running 👍
I want to explain how to change the cutter
Good information
please make a video all problems of the machine and how to solve please ! Please !!!!!!
Thank you
Bom dia Qual velocidade de trabalho das estruzoura plástico e alimentos com compressão Antônio Bueno brasil
good work
I need more information for mechanical parts please help me 😢
A giant nozzle that pushes melted plastic through the needle that forms at the end the desired shape.
I have a small extruder and the entire barrel moves in a circular pattern maybe 1-2mm or so - which makes it very difficult to maintain tolerances on the product extruded. I thought it was due to a screw that was broken and repaired and assumed might not be 100% straight, but the same thing happens also with a new screw... what could be the cause? The motor and the gear box? A bent shaft that connects to the screw? Maybe the extruded not being level properly on a hard surface (it is on a wooden pallet)? A bent or worn out barrel?
Check the bearing. If you not have a bearing, then that will be the problem.
I know my comment may be a little late but sounds like you need to level out your barrel and make a mount on the front of the barrel and the rear of the barrel.
respected sir ,
i need your mentorship and gauide i am making a project for my client but he is demanding from me to show animation like this i mean to show him transformation of plastic into fluid sir its humble request with you .Would you please suggest me a software or tool which can this type of animation as you have show this animation is pretty awesome.
How to calculate production per hours
We are professional in Extrusion Machine.
Hi sir !! Have any vacancy for the design and development field .
Your Videois an exerpt from our Extruder Operation and Control - Single Screw: Lesson 1 course. This program uses state-of-the art animation technology to teach the fundamentals of single screw technology Very Useful Sharing
if large flow is needed than increase temperature of screen pack
?!!
Super
THANK YOU FOR KNOWLEDGE VERY GOOD IDEA THANK YOU AGAIN SIR YOU ARE GREAT HERE KARISHNA
Nice informative video
Hey can you tell me which software you used for designing this machine? Is it AutoCAD or SolidWorks or something else?
Nice infometion video
I am tape plant dutec 1400 Opreter
Can anyone help me, i have issue on plastics recycling extruder. When i run hdpe material production is like 3 ton for 12 hrs but for PP material flow slow down and maximum production is 2 ton.
What polymers are used in home casting of AR15 recovers?
Thanks lot sir
We use in Saudi SABIC Double screw
بدر العتيبي
Textile machine
I’m looking for this Machine where can I find it
Tatendaishe Manzungu jiji.ng or konger
Michel Uduaghan Thank You
Hi, friend, we can help you about this machine,You can contact me directly on Mobile/Whatsapp/Wechat:0086-17051026627 Email:service05@lookingplas.com
ABS material is good
for Extruder machines
hansa ram parihar No, you should use PET plastic
Can anyone tell me the type of gear box oil used on a single screw 3.5" NRM Extruder machine and the type of lubricating grease
we have a single screw pp sheet extrusion line, but we have problem of unequal sheet length after cutting.
Its either the vaccum or the puller
good night sir you very honest sure b
Basell corp has one. I rebuilt it.
Good my job.Thanks
bravo
Krauss Maffei
Pralon pertama dan terbaik wkwkwkwkwk
polypropylene sheet and roll manufacturer from Dongguan
i am maintenance engineer in woven sack industry and also involved in erection of woven sack industry mail me if any interested work or join us-kultarsingh6@gmail.com or call +918954534744
very nice
What happens ive you once pushed plastics through it and then turn it off till its cold? Can it start then or what do you do?
hi, i have extruder machine and i have sheet thickness problem usually on the right side of the sheet is 3 mm and the left side of the sheet is 2.6mm. anyone can help me ?
Could be your sizer or the jets need cleaning and maybe the temperature and speed need adjusting?
Textbook plastics, important to know if you work with extruders
thanks for the video. nice one.
I have questions about extrusion
please send your enquiry to this email : firstecd07@oilfa.com
How would you make multilayer thermoform.
Hello Parmar, we are the manufacturer of thermoforming making machine, you can add my Whatsapp: 0086 13386456156 so I can send more running vedios to you, tks
how can i design seed oil exstruder
Very Informative.
Hi! we have static mixer. We can sale element to you, do you need ?
Nice
what extruder for extrusion PEAD ?
it single or twin screw ?
Emizan Aizan it was single screw...how do you know about that...i mean are u studing about that
it's single
Yeah that’s a mono screw design most likely used for compounded materials from my experience.
It is very informative
Good vidoe, thanks for posting.
extrusion profiles
que bueno...
how price
if you need any kind of rubber extruder machine,email zsyzd@yzrubmach.com
Plastic pellets
what is at firepa .com
Remove plastic and put cornmeal instead then BAM! You had cheetos for life
DUDE
Plz tell me how much demodiene use for cleaning of screw nd die of extruder to go for long tym Plz help me
👍
HOLA GENTE DE 3ºA DEL IES ALBAIDA, AJAJAJAJA
GOOD VIDEO MY FRIEND ;D
tenho q aprender inglês hem!!!
Like 👍
Tejas
I m a manyu factoring hdpe pipe printing laters
who else is here because of Professor Wilkins?
Hello friend, we are the supplier of PE and PS extruder, you can add my Whatsapp: 0086 13386456156 so I can send more running vedios to you, tks
Y'all ever have to work on one of these in a shitty factory
helo
Groeten van Ivo
Rakesh nag
@humantorch09 yeh burnt poly on material is a bitch
Thanks
ua-cam.com/video/ztT65WI_nE4/v-deo.html
nerds
Well paid nerds.
;d
????? says NOTHING about how to operate or control the d@mn machine 🙄
very nice
Nice