Suncast And Craftsman 4ft x 6ft Resin Storage Shed - Things To Know Before You Buy

In this video I talk about some things you might want to know before you buy the Suncast Or Craftsman 4x6 Shed.
How To Assemble This Shed: • How To Assemble A Craf...
Review Of This Shed: • Craftsman Suncast 4x6 ...
AFFILIATE DISCLAIMER PLEASE READ:
The links below are affiliate links. This means I will earn a small commission, at no additional cost to you, if you choose to click the link and make a qualifying purchase. As an Amazon Associate I earn from qualifying purchases.
Amazon:
Basic Safety Equipment - Safety Glasses On Amazon - amzn.to/3IDvbfU
Basic Safety Equipment - Nitrile Gloves On Amazon - amzn.to/3J6BUAx
Basic Safety Equipment - N95 Masks On Amazon - amzn.to/41BrTCy
Basic Safety Equipment - Earplugs On Amazon - amzn.to/3kFfj4u
Intro/Outro Music: RKVC - Tropical Thunder
DISCLAIMER PLEASE READ:
For reasons beyond the control of Todd’s Garage there is no guarantee of the information in this video and/or description. Use of the information in this video and/or description is at your own risk. Todd’s Garage recommends the use of proper safety equipment and taking all safety precautions when working with the tools, items, or other things seen or talked about in this video and/or description. The information in this video and/or description does not guarantee a certain result or warranty of any kind, expressed or implied. Under no circumstances shall Todd’s Garage have any liability or responsibility for any injury, damage, or loss of any kind that may result from the use of the tools, items, information, or other things seen or talked about in this video and/or description. Any Injury, damage, or loss of any kind that may result from the use of the tools, items, information, or other things seen or talked about in this video and/or description is the sole responsibility and liability of the user.

[@stephenbosco6265]

Thank you Todd. Very helpful and time saving.

[@thomasbrooks8534]

Thanks for addressing the one step in the manual that was 100% subpar! good video.

[@FamilyPickleball-dz7yn]

Thank you for the video. It helped a bunch.

[@bastienclarke1810]

Thanks!

[@colt5189]

If you make wood shelves for this, make sure to put two screws on the sides. My original shed, I didn't do the screws and had problems of the shelves crashing down causing the sides to eventually bow out. I then had to nail/glue some extra wood on the sides to make the shelves a little wider to make up for the side of the unit bowing out, and then I put a couple of stainless steel screws in. And it has held up since until it got replaced with a newer larger Suncast.

[@kennyloyolite]

Can you pls share the picture of the wooden shelf with the screw how it’s installed ?

[@DontbeAMoron1]

Did you ever anchor it down? I am just wondering if that is really needed, or if it is just to make sure it really does not work move.

[@colt5189]

When I try to mock up to see how things fit. I use Corel Draw, a vector program, and take the measurements and draw squares and see how they fit.

[@ArcHourGaming]

Hi, I was wondering if you have an update on this shed? Has it held up?

[@billmalec]

Put items on the walls, ceiling and doors and you'll have much more room.
Shelf or shelves on the back, vertical items on side walls toward the front.

[@pravinadubal937]

Do you have any video on building the base?

[@TheSmurfetteable]

Great Video, where there any issues with the shed not having a vent?

[@wfbtmcc]

Thanks a lot for your video. Do you have any other video to show us how to put the shelfs in it?

[@ToddsGarage]

Hi, thanks for watching, I don't have a shelf video yet but hope to in the near future. Thank you again!

[@GotSig1510]

Does it have vents?

[@tdc720]

I'm looking to purchase this. Do you happen to know the width of the largest panel? I know the box won't fit in my Jeep. I was hoping to remove the pieces from the box to transport it. Thanks for the video.

[@jeangibsonmedley]

I bought 2 and they fit the entire floor space of my 5x8 trailer. I would not have been able to get them in my car, a Honda pilot.

[@cinepost]

How much did you pay?

[@jonathanleung9540]

Any thoughts on this one vs the Suncast or are they pretty much the same?

[@ToddsGarage]

Hi Jonathan, there might be some differences but they are similar. I bought the Craftsman because I like that brand!

[@valthomassie4116]

there are no replacement parts for suncast sheds. those round things are bolts and suncast has no replacement for those, or the lock piece. i got a few things from ebay.

[@chardy304]

Do you have the dimensions the shelves I can make

[@wendymontie5660]

I’d say measure inside yours as it’s built and go from there.

[@Onebite11]

Seems kinda of convienant that ask the FBIs wray questions at the same time this trial is going on

[@papichulo7757]

Only takes 20 minutes

[@ToddsGarage]

Thanks for watching!