Im really enjoying your videos and i have a question. Im setting up a esc and winch and a light kit to my wpl c24 6 channel transmitter, what battery do i need?
I've got a tray of boards that are 90% complete. Finding the time to sit a finish them and put together a product page is proving a bit tricky. They will be available before long though, hopefully...
It's been a while, but if I remember correctly the stock LEDs are wired with 2 LEDs in series. If so pop a 100r resistor on the positive wire and connect it to the ground and power on a spare receiver channel. It'll power up with the radio and wont be controllable, but they'll light up ok
Now there's lots of aftermarket bit and bobs I'm thinking about upgrading the C14, or maybe just getting another WPL truck and fitting the upgrade while building
Thank you so much for your tutorial. It's a real pleasure listening to your step by step ya make things easier to understand. Best wishes.
Edward
i must say you are the only one that have a video showing what and how to do the build god bless you friend
Superbe réalisation.Le soin et la minutie apportée font plaisir.Bel ouvrage.Bravo
just seen your video, some great stuff going on. I've just got a wpl c24,totally new to this so will be watching more to get idea's.
Awesome man. Great job!
hello, where can i buy the light controller board? i was searching aliexpress but no luck, can you please provide link? thank you...
Nice upgrade,
Wkwk
Brilliant video. Im a newbie to rc, what light kits setup is that? I want to buy same one
Hello! Where can I find this RC light controller? Can you provide a link description? Thank you very much! You do such a great work! Congratulations!
Im really enjoying your videos and i have a question. Im setting up a esc and winch and a light kit to my wpl c24 6 channel transmitter, what battery do i need?
I see a new video from "RCMojo" and I click "Like" :D
nice video man :)
nice light, great work bro!
Hi man, great video, what resistors are you using for each LED? What battery voltage you are using?
The lights run from the BEC supply, so 5v or 6v. Most of the resistors are 220r with a couple being a higher value to keep the total current down.
Do you have a link for the lipo battery or a brand name and type.
Any updates on the mini light controller?
what is the name of the 2s lipo battery did you used for the c14
I do believe it was one of these - www.componentshop.co.uk/7-4v-800mah-25c-continuous-discharge-lipo-battery-giant-power.html
Love it , very well presented , oh did I mention I want that setup lol
Hi, I accidently cut my 2,4 ghz receiver antenna. I have the two part, can I weld them togheter? Thank
Rolf Recker ok thx, I did the 31mm or something like that method
This is exactly what i'm after. So how long until the board is available ? 74hc is not showing it.
I've got a tray of boards that are 90% complete. Finding the time to sit a finish them and put together a product page is proving a bit tricky. They will be available before long though, hopefully...
What value resistors did you use
Interior dashboard?
Does this board do taillights that light up further as brake lights?
It does indeed
Is there a way to wire the stock lights without this mod ?
It's been a while, but if I remember correctly the stock LEDs are wired with 2 LEDs in series. If so pop a 100r resistor on the positive wire and connect it to the ground and power on a spare receiver channel. It'll power up with the radio and wont be controllable, but they'll light up ok
any more improvements coming for this nice little Hilux? :)
Now there's lots of aftermarket bit and bobs I'm thinking about upgrading the C14, or maybe just getting another WPL truck and fitting the upgrade while building
Super!
very good work :-)
Size of led plz?
5mm everywhere except the lights in the bumper which are 3mm
RCMojoTV thanks
Shut up and take my money
Where can I get the light controller? Thank you