My 2002 Dodge Ram 1500 when bought brand new in 2002 had all this done before we drove it home,,, 207,000 miles 18years later still rides and drives like a dream
I have never in my life liked 2 door trucks until seeing this trucks stance! I have a 13 crew cab belltech 2/4.. awesome job guys you nailed that trucks look!
Suspension. Breaking. Power. The Top 3 Elements of a vehicle build one should NEVER compromise in! Do it right the first time or save the money so it can be right!
Can you guys please put out a kit for 3rd gen 2002-2008 Ram's? I have an '05 Ram and I'm looking to replace my McGaughy's spindles with something better.
Thats why they say anything over a 4", you c-notch the rear. Or you change the trajectory and pivot ratio. a 5/7 on a leaf sprung truck looks way lower than a 5/7 on a modern rear coil truck.
What can you do for a 2008 AWD NNBS DENALI? currently it has spindles and belltechs shocks over stock coil over strut and Belltechs in the rear with shackle kit and spacer removed. So like a 2/3.5 drop.
I want to get this done. Any place you recommend in Kansas? I'm willing to drive 8 hours or so if I have to, to get it done. Just trying to do it good once and forget about it.
I have this same IHC kit on my 2wd single cab 2014 ram but the ride quality isnt great, very bouncy, rear end bottoms out on every dip or bump riding on the highway is nerve wracking I always feel like im going to hit a low spot and rip my front bumper off. The frame is literally about 2 inches off the ground in the front. Curious what are some things I could do to improve this? At the moment the truck is on 245/65 R17 in front and 265/70 R17 in the rear, I have a set of 20" wheels but Im not sure on a size tires to run that will clear with the big drop kit. Any help is appreciated.
Just bought a 94 ram standard cab shorty do you guys have a kit for that old of a truck? Also it has a factory 5.9 if that makes any difference. Thanks & great videos
Heey maaan hows it upp in mountain Everest!!!!!! man hes talking like hes far up on top of someone or in a hurricane trying to get someone back in the house lol
Hey man my truck is dropped on 17" wheels and I had a hell of a time getting the bottom ball joint stud to clear the wheel without scraping. I want to correct the very sad engineering I had to do to make it work... I was trying to use a McGaughy drop spindle and it moved the stud further towards the rim, every time I cut the wheel it turned into a metal lathe. Ouch... Question is: Will the ball joint studs contact a 17" wheel with these fancy new control arms?
Hey boss I need help I have a 2018 RAM Rt single cab I have installed the Belltech 2/4 drop and I installed the Inez 4” relocation no cut relocation brackets but it bottoms out really bad I have the belltech nitro drop shocks i just wish I could put my atv with out bottoming out
Clean ass stance, I like that slight rake too, just gives it a very subtle aggressive look👌👌 again, Inez Hotrods, love u guys😘❤ Papi Ivan pls notice me😩🙌🙌 lmao
leonel buendia it has a nitrous system on it to go faster. What you are seeing is them purging the nitrous system. You purge to get air out of the lines. It also looks cool.
leonel buendia expensive 😂 depends on your budget 🤷🏾♂️ make sure you get someone who knows what they’re doing if not you could blow your engine or something else
So ima order your kit on eBay for the 4/6 does it come with the rear shocks to drop it 6 or do original ones have to get cut to achieve the 6”? Also does it include a shorter tie-rode or do I cut mine thanks in advance
Great videos Bro. I have a 2018 Ram Sport single cab 4x2. I dont want it slammed I just want a 2-4 drop. You said this kit on this 2014 Red Ram rides like crap. Is that because the kit was modified or because of the kit itself. What do you suggest I do to lower it 2-4. I would like to kit the ride quality the same or as close as possible. Stock wheels are 22".
@@johnstrawser420 I went with belltech 2-4 drop and viking double adjustable shocks on all 4 corners and IHC cut kit relocation rear control arm brackets. Running factory R/T 22" wheels
I have a question I have a stick 2012 ram 1500 4x4 4 door what kit should I get I want to drop it a little not to much like a 2/4 drop but don't want any issues like what brand and should I get just springs or shocks also and something I could install myself any info would be grate thank you in advanced
Great video my man awesome work, I just picked up a 2017 ram 1500 4x4 ecodiesel crew cab, just wandering if you have a lowering kit for that model, keep up these awesome vids.
Good looking truck 👍 how much do you guys charge to install this kit on a 2013 ram1500 express with the 2/4 drop I personally installed I'd hate to do it myself you guys do a great job ....
I had a shop install the 5/7 drop and they didnt install the short sway bar brackets or the pan bar relocation z bracket also my diff is shifted to the right about 3 inches how can i fix it ?
The only thing I would of done different on this truck was ran 22's instead with the same tire profile to fill in those wheel wells a bit. 295-40s in the front and 315-35s in the back. Other than that its perfect. Looking at a quad cab like this one on co-part right now.
I bought a bell tech kit for my 2015 ram 1500 quad cab it’s a 2” drop in the front an 4” in the rear is there any thing els you recommend I also change out when I get this kit installed????
You will need to re-install your front stock springs. You will achieve the 5" drop with our control arms. THe rear you need 4 link relocation brackets and drop shocks. $1060.00 shipped
Hello, our brackets are designed to be at 6" or 7" drop. Anything more will shift axle of to the side. Also make sure your running the drop down trac bar bracket to recenter your axle side to side. If everything is ok then recommend a spohn adjustable trac bar
Recommend to go with our 4/6 kit. You will need our control arms, 4 link brackets, and rear drop shocks. Any questions feel free to give us call 956-424-6901
There's other companies such as Mcgaughy's and Belltech that make kits for the 3rd generation Rams. A 4/6 drop for 3rd gens is quite common and easy. Trying to convert your leaf setup to a coil setup would be more trouble than it's worth.
My 2002 Dodge Ram 1500 when bought brand new in 2002 had all this done before we drove it home,,, 207,000 miles 18years later still rides and drives like a dream
I have never in my life liked 2 door trucks until seeing this trucks stance! I have a 13 crew cab belltech 2/4.. awesome job guys you nailed that trucks look!
Suspension. Breaking. Power. The Top 3 Elements of a vehicle build one should NEVER compromise in! Do it right the first time or save the money so it can be right!
Cannot wait for my kit to arrive! Ordered a 4/6
Post a video of the truck with the drop kit
@@7thkev519 in the shop homie, can try when shes back tomorrow!
@@HDMeh insta? So I can see the progress👀
@@lupelara9953 gav_5.7 havent been taking many pics. Workin too much to take it out and get some shots.
Single cab,standerd bed.4.7 with a 4:10. easy u-turns. This lil Mama gets down with that high compression.
Gheetoo Aass Jaalee On that shit "Un Compa Cobra Más Barato El Drop" 🤣
IHC= Da Best. Superb customer service, love my 4/6 drop on my Ram.
That truck is freakin gorgeous* man I want a ram dropped like that to load my bike in the bed
Can you guys please put out a kit for 3rd gen 2002-2008 Ram's? I have an '05 Ram and I'm looking to replace my McGaughy's spindles with something better.
Yeah it’s setting real nice I have the Roush stage two kit on my f150 2/4 drop kit rides really good to
That thing was hacked before y’all got to it. Thank god too. I can only imagine it was a disaster one bad bump from happening
Thats why they say anything over a 4", you c-notch the rear. Or you change the trajectory and pivot ratio. a 5/7 on a leaf sprung truck looks way lower than a 5/7 on a modern rear coil truck.
Would like to know what was pinion angle before and after.
What can you do for a 2008 AWD NNBS DENALI? currently it has spindles and belltechs shocks over stock coil over strut and Belltechs in the rear with shackle kit and spacer removed. So like a 2/3.5 drop.
cant wait to get mine installed :)
This will help me in the future
Hey brotha do know any shops in California that could do an amazing job like yours
Real mechanical work niiiice
Nice ride
I have s 94 ram single cab with a 4/6 which bounces a lot.
What would you recommend do it won’t bounce as bad.
Thanks
What is making the white steam like smoke?? It looks awesome!!!
I’m gonna buy the 3/5 drop for my ram I’m going with 22s could anyone tell me what tire size I should go with ??
285/40r 22 should fit good
@@donchuchort2296 thanks
I get a lot of wheel hop in my 2014 dodge ram is there anything i can do to fix that ? THANKS
I want to get this done. Any place you recommend in Kansas? I'm willing to drive 8 hours or so if I have to, to get it done. Just trying to do it good once and forget about it.
I have this same IHC kit on my 2wd single cab 2014 ram but the ride quality isnt great, very bouncy, rear end bottoms out on every dip or bump riding on the highway is nerve wracking I always feel like im going to hit a low spot and rip my front bumper off. The frame is literally about 2 inches off the ground in the front. Curious what are some things I could do to improve this? At the moment the truck is on 245/65 R17 in front and 265/70 R17 in the rear, I have a set of 20" wheels but Im not sure on a size tires to run that will clear with the big drop kit. Any help is appreciated.
If I got 24 inch rims with that drop, would it be rubbing issue when turning?
Very helpful!👊🏾
love your videos bro, i have a question how do you get the smoke to come out the ram??
That’s not a 2014 it got a facelift in 2013. It’s a 09’-12’.
@Ariel Robert ok
I think the people who own the truck know what year it is😭
Man you guy's are good!
Just bought a 94 ram standard cab shorty do you guys have a kit for that old of a truck?
Also it has a factory 5.9 if that makes any difference.
Thanks & great videos
Y’all still do drops i go back down in late January I’d love a good drop kit on my 2016
Heey maaan hows it upp in mountain Everest!!!!!! man hes talking like hes far up on top of someone or in a hurricane trying to get someone back in the house lol
Hey man my truck is dropped on 17" wheels and I had a hell of a time getting the bottom ball joint stud to clear the wheel without scraping. I want to correct the very sad engineering I had to do to make it work... I was trying to use a McGaughy drop spindle and it moved the stud further towards the rim, every time I cut the wheel it turned into a metal lathe. Ouch...
Question is: Will the ball joint studs contact a 17" wheel with these fancy new control arms?
Hey Mopar if you haven't done so, contact us at 956-424-6901 so we may assist you better. Thanks
Truck looks badass !
What kit do you have to blow out the fog/smoke from the sides ?
Front bump stops removed in the front?
Hey boss I need help I have a 2018 RAM Rt single cab I have installed the Belltech 2/4 drop and I installed the Inez 4” relocation no cut relocation brackets but it bottoms out really bad I have the belltech nitro drop shocks i just wish I could put my atv with out bottoming out
Did you remove the bumpstops?
IHC Suspension yes I removed the bump stops and the pockets
Armando Alfaro you find a fix? About to install same set up you have minus the nitro shocks. Curious if I’ll bottom as well.
Clean ass stance, I like that slight rake too, just gives it a very subtle aggressive look👌👌 again, Inez Hotrods, love u guys😘❤ Papi Ivan pls notice me😩🙌🙌 lmao
Hey what’s The White Vapor coming out the Front?? can you give me the name of the thing you put to make it work thanks
leonel buendia it has a nitrous system on it to go faster. What you are seeing is them purging the nitrous system. You purge to get air out of the lines. It also looks cool.
I'd like to know myself. Might be that NO2 purge someone mentioned above.
Yeah thank you I am gonna get it soon for my Ram aswell
leonel buendia expensive 😂 depends on your budget 🤷🏾♂️ make sure you get someone who knows what they’re doing if not you could blow your engine or something else
I have 97 chevy lowered 4/6 on 22s.... I just noticed it has those gaps. Why does the Axel move??? And how can I fix that???
I have a 2018 dodge 1500 ram quad cab I'm looking to lower it and need performance stuff it has vvt 3.6 engine & 8 speed automatic transmission
3.6? Wtf why couldn’t you get a 5.7
@ihcsuspension what kits do you have for the 4x4 trucks, Id like to 2/4 drop my reg cab 4x4 after doing the hellcat swap.
So ima order your kit on eBay for the 4/6 does it come with the rear shocks to drop it 6 or do original ones have to get cut to achieve the 6”? Also does it include a shorter tie-rode or do I cut mine thanks in advance
DO NOT ORDER FROM EBAY, IT COULD BE A KNOCKOFF!!!
Great videos Bro. I have a 2018 Ram Sport single cab 4x2. I dont want it slammed I just want a 2-4 drop. You said this kit on this 2014 Red Ram rides like crap. Is that because the kit was modified or because of the kit itself. What do you suggest I do to lower it 2-4. I would like to kit the ride quality the same or as close as possible. Stock wheels are 22".
What did you end up going with for the 2/4 drop?
@@johnstrawser420 I went with belltech 2-4 drop and viking double adjustable shocks on all 4 corners and IHC cut kit relocation rear control arm brackets. Running factory R/T 22" wheels
Will 305s tires rub on a 5/7 drop?
are these 22X9 inch wheels or 22X10?
Do you recommend replacing the front shocks with lowering shocks with this install?
No, you keep stock spring/shock because we lower by using control arms.
I love your kits , is there a shop in Florida that sells and installed your kits
Tires are just a tad too small.... nothing wrong with a bit more rubber. It’ll actually make the ride a bit better anyways
I have a question I have a stick 2012 ram 1500 4x4 4 door what kit should I get I want to drop it a little not to much like a 2/4 drop but don't want any issues like what brand and should I get just springs or shocks also and something I could install myself any info would be grate thank you in advanced
Great video my man awesome work, I just picked up a 2017 ram 1500 4x4 ecodiesel crew cab, just wandering if you have a lowering kit for that model, keep up these awesome vids.
One 2021 Ram where do I need to cut on the spindle to get better steer radius??
Will you drop a rwd ram 2500? And if you can how much would it be to also give it an airbag suspension?
Wouldn’t even a small bumpstop in the back help?
Good looking truck 👍 how much do you guys charge to install this kit on a 2013 ram1500 express with the 2/4 drop I personally installed I'd hate to do it myself you guys do a great job ....
Hey H. Garcia, give us a call at 956-424-6901
It doesn’t hit on the front ??? I wanna do a 4/6 on my ram but it looks like it would hit on the front
What’s a good wheel set up I got 22 hellcats on a 4/6 drop crew cab but I want it to be leveled what wheel set up should I do
Will a 5/7 drop clear the stock 20s with 275/60/20?
60 is to tall for the drop.
If I just want a 2/4 drop nothing more what's the best route to go?
I did a 4/6 drop kit on my 2019 crew cab ram 1500 one of my rear wheels is popping out more then my other is that normal or I need to adjust something
Why have two R/T badges on the front grill?
Do you guys do any 88-98 Chevy/Gmc c1500 drops??
Do you have a video on how to install a 2 4 lowering kit?
Sorry not on a 2/4. Belltech 2/4 is a real easy kit. Just replace springs
do you have suspension for. chevy
yes sir need a kit ?
@@ihcsuspension2758 yes how much are the kits
I'm going to need that discount code if I want a 5/7 drop
I had a shop install the 5/7 drop and they didnt install the short sway bar brackets or the pan bar relocation z bracket also my diff is shifted to the right about 3 inches how can i fix it ?
Hemi Life that sucks. Take it back to the shoo
Will be getting one soon
ANy questions feel free to give us call 956-424-6901
Good content. Really knowledgeable
Thank you sir
The only thing I would of done different on this truck was ran 22's instead with the same tire profile to fill in those wheel wells a bit. 295-40s in the front and 315-35s in the back. Other than that its perfect. Looking at a quad cab like this one on co-part right now.
What did you put on the side to throw out the Smoke ?? What’s the Modification called ?
leonel buendia nitrous
How did you achieve a 5" drop up front with the stock spring and shock, are the arms different than the 4/6 drop arms?
He mentioned they replaced the lower control arms, so it brings the wheel up and the frame down.
Do you recommend the bell tech 2/4 without cutting the springs?
Depends, if you want a 2/4 go ahead. But if you want to go as low as a 4/6. You need our kit.
I bought a bell tech kit for my 2015 ram 1500 quad cab it’s a 2” drop in the front an 4” in the rear is there any thing els you recommend I also change out when I get this kit installed????
Have you had problems at high speeds and bumps feels like the ass end is dancing all around
Nice it looks clean.
Can I still haul stuff in the bed or pull a boat if I lower my Ram
Jon Banks if the job is done right, yes. If it’s done like the beginning of the video, absolutely not.
Can y’all make a 5/7 kit for a 2004 Dodge Ram been wanting a 5/7 drop
Good job guys do y’all work on f150?? I got a 2013 f159 Crew cab I would like to drop
Hey Nacho, as of right now we don't but we are in the process of fabricating kits for Fords.
Thanks for the response I will keep following you guys hope y’all get can get would love to take my truck to y’all
I have the 2/4 drop belltech, how much to do the 5/7?
You will need to re-install your front stock springs. You will achieve the 5" drop with our control arms. THe rear you need 4 link relocation brackets and drop shocks. $1060.00 shipped
I have your rear brackets but one side of my tire is pushed out a lot more then the other side?
Hello, our brackets are designed to be at 6" or 7" drop. Anything more will shift axle of to the side. Also make sure your running the drop down trac bar bracket to recenter your axle side to side. If everything is ok then recommend a spohn adjustable trac bar
Ju wondering how wide are the rims
hey bro I have a 2014 Ram rt but I took off the 22s and put on the stock 20s with 275/35/22s, I want to do the 4/6 drop but will it rub?
hello eric, yes sir 4/6 would clear just fine with 275/35/22
IHC Suspension what about the 5/7?
Wher can i lower my 09 dodge ram 1500 in the bay area?
Military discounts?
How did you achieve the 5inch drop in the front?
I like that t shirt EL PASO TX
Awesome stance!
Is that Inez haven't seen him in a while
That's a 2014? In 2013 they changed the front end... That looks more like a 2012...
I was about to say that lmao its like a 10 or 11 at most
Don’t forget the lights gavevit away
It's a 2009 to 2012, need to see interior to tell exactly, nice lowering kit but it's not inexpensive at all.
An I also plan on putting 24” wheels!?
Recommend to go with our 4/6 kit. You will need our control arms, 4 link brackets, and rear drop shocks. Any questions feel free to give us call 956-424-6901
Hey. Bud love your videos quick question tho what the lowest drop you can do on a 4x4 ram 2012
Hey Mathew, lowest we offer is a 4/6 kit. Our kit is 1200 plus shipping.
Inez Hotrods and will work on a 2009 crew 4x4 sport ? Complete front and back? If not how much sir ?
Would this feet 275/60/20 tires
Bro do u also work on 1st gen 300c
I have an 03 Hemi Ram 2wd reg cab..want to do a complete swap to parallel 4 link, Panhard bar & coilovers...how much?...I live in Harlingen
Your 2003 uses traditional leaf springs in the rear.
I want to do away with the stock leaf springs
There's other companies such as Mcgaughy's and Belltech that make kits for the 3rd generation Rams. A 4/6 drop for 3rd gens is quite common and easy. Trying to convert your leaf setup to a coil setup would be more trouble than it's worth.
Do you guys have that kit for a 2015 gmc sierra
Are you in California?
Love your work man where are you located ? How much would this cost to lower on dodge ram 2014 2wd?
We located in Palmview TX. Give us a call and well get you set up with your closest dealer
Where can I call you at? #?
Ruben Ortega it’s in the video at the end and description
@@ihcsuspension2758 hi bro do you have c notch for ram pickups
Good job ,
I got a 2/4 on a crew cab. What do i need to get for a 5/7
very nice truck
Love it