0:00 Automatic light with adj sensitivity 2:20 Auto cutoff 12v battery charger 5:03 Auto cutoff pump when tank is full 6:52 Short Circuit protection circuit using relay 8:56 Why diode is mandatory in relay
This video is very neat... clean visual setups of tasks, helpful. The written explanations / identifications were to fast, much to fast, I'm probably just a slower reader, hummmm. I thank you for the information that I did gather from this video. I need to sharpen my skills and mean no ill will in my learning how to interpret one who instruct others in something they know very well. I know you hit a homerun with more aggressive readers, working on getting there, thanks.
How to make the circuit on minute 5:03 ....but Reversed ?? I need the light (aka motor) to turn ON when yellow cables touch the water ?? This i need for monitoring any water spills !! Like a faucet tubing breaks while you sleep and put a siren and this already happened to me and lost money on carpets etc etc Please tell me if it is easy to do ! Good job with your simple awesome videos !!! Thanks
Nice circuits, made in a special style! Maybe you should out some warning in there about safely working with line voltage. You know, just so that the kids don't have to find out by themselves that it hurts when you touch that... ;-)
excellent. bro. can you pls make " surge protector" (MOV) for electrical extention board 3(switch)+3(Socket)+1(fuse)+1Indicator / 3+3 / Switch socket combined for general 220 - 240 v. home use
@@internetlivestream1 true. But when you draw the water slowly after the pump has stopped, the motor would be switched on. But it would turn off soon, when the water touches the wires. The cycle repeats. A slow discharge of water can result in pump turning on/off in short intervals, that can cause stress to the motor.
6:55 My relay doesn't have any label to tell you how many voltage to activate the coil. It just says SRD-05VDC. It tried with 5v. Nothing happened. Then i tried 6v finally the coil activated.
2:30 This circuit is not effective for turning on and off a space, for example, indoors or outdoors, because it needs to be either dark or light! If the sun is setting, the lamp will flash continuously until the weather is completely dark or completely bright! Please teach him a circuit so that this does not happen to him, thank you
Hello, do you have a example of intermittent switch circuit to 2 different loads using one or two relays? For example light on the AC lamp A, then after some seconds (time adjusted by potentiometer) light off the lamp A and light on the lamp B, then light restart the cycle... light off the lamp B and light on the lamp A entering in a cycling routine)
I love the electronic circuits. They are educational and we teach the young ones. Thank you.
Cool life hacks 😎👍👌❤️💋
0:00 Automatic light with adj sensitivity
2:20 Auto cutoff 12v battery charger
5:03 Auto cutoff pump when tank is full
6:52 Short Circuit protection circuit using relay
8:56 Why diode is mandatory in relay
Thank u
Components ki value to batao video me
Which Transer you used for water cutoff.,...pls reply
bala krishnan
I didn’t make any of these things, I just made a time stamp list.
@@balakrishnan-er5pn
Bc547
Cool life hacks 😎👍💋❤️
This video is very neat... clean visual setups of tasks, helpful.
The written explanations / identifications were to fast, much to fast, I'm probably just a slower reader, hummmm.
I thank you for the information that I did gather from this video.
I need to sharpen my skills and mean no ill will in my learning how to interpret one who instruct others in something they know very well. I know you hit a homerun with more aggressive readers, working on getting there, thanks.
Bạn ơi bạn làm rất hay mình rất thích cách làm của bạn
Good idea 💡👍👌❤️
Good idea 💡👍👌❤️💋💋
Good Circuits ................ Thank you for Sharing expertise....
muy bien, que bueno todo estos proyectos gracias
Very good, you know your job.
Awesome, brilliant idea bro
Very nice...!
Nice little gizmos. But please, add those. SCHEMATICS so it would be much more clear and easier to understand the function.
Best idea 💡👍❤️👌💋
Все что не смотрю все нравится и дублирую как Автор делает. И все работает 👍👍👍👍👍👍👍👍
amazing project,bro
Love you video's I find them interesting & very fascinating. Thank you for posting.
How to make the circuit on minute 5:03 ....but Reversed ??
I need the light (aka motor) to turn ON when yellow cables
touch the water ??
This i need for monitoring any water spills !!
Like a faucet tubing breaks while you sleep and put a siren
and this already happened to me and lost money on carpets etc etc
Please tell me if it is easy to do !
Good job with your simple awesome videos !!!
Thanks
Thanks, I did notice the use of the diode, but yes, good showing of the use
Спасибо!👍
Полезные схемы, просто, наглядно👍
Very helpful specially to those electronic hobby.
wow Nice video
Very Thanks to Circuit Nubber 1. Very USEFUL. Like...
As you said ... Awesome! Thanks for sharing.
Very good projets!
Great idea 💡👍👌❤️💋
自製利害……！
好手……！😁😃
usefull video like friend
I like the one with the cup of water and the live wires dipped into it.
Informative
Super 👌😍👍❤️💋
VERY GOOD KNOWLEDGE THANK YOU AGAIN SIR YOU ARE GREAT VERY GOOD IDEA THANK YOU HARE KARISHNA
can I use a 12 volt relay instead of this 6 volt relay?
Great work
good video. thanks💪💪💪
Excellent....
Too good sirji
Excellent...
.. great....well done........
Thanks for the video. Very interesting. I love electronics. Keep posting more videos!
Thank you very much
Beautiful 😍❤️💋👌👍
Hello my friend! I want to make this lightsensor circuit, but with 12v relay, can I use the same parts except from the relay? Thank you!
Very good ideas thanks
Perfect 👌❤️👍💋💋
Nice💡
Nice circuits, made in a special style!
Maybe you should out some warning in there about safely working with line voltage.
You know, just so that the kids don't have to find out by themselves that it hurts when you touch that... ;-)
Iti is very interesting and useful , just find the aplication..thanks sir.!!
Well done. Thanks.
Can it work if I have 2kO potenometer
Здравствуйте. В реле отключения насоса при заполнении бака какой резистор используется? Судя по маркировке 220 Ом?
Cool) Like!
Baik dan bermanfaat kepada semua sebagai rujukan.
you are creative
Sigue así !!!
What size of diode did you use?
Really very good
good idea
Hey nice !!!
Can you do the Water cut off with 12 v?
Because I need to do something like this for my car in the antifreeze reservoir.
How to make solar panels single axis sun tracking circuit using linear actuator of 12v DC please reply
Luar biasa 👏
You're the king !. As always , you make circuits that are easily understandable....just keep up the good work!.
Blessing from Malta.
Thank you
Nice 👌👍💋❤️❤️
excellent. bro. can you pls make " surge protector" (MOV) for electrical extention board 3(switch)+3(Socket)+1(fuse)+1Indicator / 3+3 / Switch socket combined for general 220 - 240 v. home use
The master.
Gracias excelente trabajos
Dose it have to be a certain relay I have to use
Any relay will work
Bro which relay u r using
Very good
Number 1 Circuit.
Goodlux💖💖💖
useful video! thumbs up! :)
Bacana parabéns ajudou muito!!!
if the relay load is connected between emitter and ground does the transistor going to face any kind of damage?
The water pump one is not practical. The pump will keep staring and stopping. You need it to start only when the level goes down much lower
thats the idea it shuts off the pump when the water level reaches the wire and when you use water from tank pump will com on to refill
@@internetlivestream1 true. But when you draw the water slowly after the pump has stopped, the motor would be switched on. But it would turn off soon, when the water touches the wires. The cycle repeats.
A slow discharge of water can result in pump turning on/off in short intervals, that can cause stress to the motor.
What transistor use
great job! really educational
Jacob Vad YES pin
Thanks.very nice. Thank 4 you
Next of your coming video pls put full Name details what components do you use on each of your projects do.
nice work
Vai kotu amp bettarry charge dite parbo.are kotu amp transfoma
hi! just want to ask if what is the value of the transistor in auto cut off 12V video? I'm gonna buy the components, thanks :-)
Bc547, NPN transistor
@@TechIdeasAG thanks, very appreciated
Good afternoon, on your circuit 03 "Auto cutoff water pump when tank is full", what is the battery's advantage? Thank you very much.
Sir G koi auto on off sumbr water pump starter ke bare me video bnao
Is it bc 547 at battery charger circuit?
Good
what is the voltage of relay used in to make battery charger?
Thanks for the awesome video, your video cleaned a lot of doubts except one.
Why we are using transistor with relay?
Galing...
bhai D718 transistor kha milega..
or kya iske jageh pe koe transistor use kr skte h kya ?
very usefull video
6:55 My relay doesn't have any label to tell you how many voltage to activate the coil. It just says SRD-05VDC. It tried with 5v. Nothing happened. Then i tried 6v finally the coil activated.
great film
2:30 This circuit is not effective for turning on and off a space, for example, indoors or outdoors, because it needs to be either dark or light! If the sun is setting, the lamp will flash continuously until the weather is completely dark or completely bright! Please teach him a circuit so that this does not happen to him, thank you
Hahaha Perfect project!!!
Congratulations
good
Hello, do you have a example of intermittent switch circuit to 2 different loads using one or two relays? For example light on the AC lamp A, then after some seconds (time adjusted by potentiometer) light off the lamp A and light on the lamp B, then light restart the cycle... light off the lamp B and light on the lamp A entering in a cycling routine)
Bro components ki value bhi show kiya kro to thora easy ho jae samajhne me
thank you my name eko from situbondo jatim indonesia
I Like you thanks my tech