Це відео не доступне.
Перепрошуємо.
Part 6 - Ridge Cap - Greenstone Slate / SlateTec slate roof Installation system video series
Вставка
- Опубліковано 22 лют 2017
- Ridge Cap - Part 6 of Greenstone Slate video introduction to the SlateTec slate roof installation process.
Roofer for 22 years , do not rely on silicone or sealants for anything
Or dpm🤣
equals diy
Slater for 32 years, the silicone’s of yesteryear do not compare to what’s available nowadays, but like everything: they only work if they are used correctly.
Hi! Great video, what is the black sheet material you have used underneath the slate ridge? Is that roofing felt or somthing else?
Dpm by looks of it
Hi need help can you buy ridge caps for slate roofs. SO FED UP WITH MORTAR KEEP FALLING OUT.
Just get a roll of lead and do it the right way
That is not much coverage and will leak. Sorry.
putting good slate on the roof then relying on dpm and silicone
at the ridge not good
I would respectfully suggest you review this and take it down- it really doesn't look right with the 'slipped' slates and wonky overlaps.
Well you obviously don't know how to install slate ridges. Your giving 8" exposure on a 14" slate which is wrong. If it's a 14 " slate the most you can give for exposure is 6 1/2". Then the correct sequence is right side with left side over ,then left side again with right side overlapping both and continuing with the same sequence.
Can you expand on this a little please.
This is just a made up method of slating what a strange way of capping the ridge line .Traditional ridge methods work well and have stood the test of time
Don't use a caulking gun on a slate roof.
I hate to see silicon used ‘ it will eventually break down and leaks will happen ‘ better to use a ridge the way it was always done
Wont matter. Nails are in place
How not to ridge
9
What an awful bodge.
Terrible system
please stop