Coyote Swap New Edge #3 - Removing the 4.6 walkthrough and remaining parts overview.

In this video I go over the process of removing the 4.6 engine from the car, i also show more of the new parts that have arrived for the swap such as the exhaust, control pack, brakes, and trans/clutch components.

[@glenndiorio8967]

If you're changing the K-member, you'd be better off putting the engine, incl. exhaust on the K-member and install it from the bottom. If you go the top route, pull the electric connector off the master cyl. reservoir and watch carefully so you don't damage it. I'm not sure you can put the exhaust on and install from the top. Remove that steering shaft too.

[@MillennialDad92]

Engine is already in the car this video was made a couple weeks ago. Went thru the top then put the k member on the motor mounts then lifter it all to put the k member bolts thru the frame. We did end up having to remove the sensor from master cylinder to keep from breaking. I left the steering shaft hanging then fished it between the headers once we got it down in place. I installed the engine trans and headers all as one piece

[@glenndiorio8967]

@MillennialDad92 Glad it worked out.

[@TheToo87]

sweet stuff us coyote swap guys gotta stick together good stuff shes gonna be a bad one!!!