4165 & 4175 Carburetors

Поділитися
Вставка

КОМЕНТАРІ • 8

  • @3rdGenGuy
    @3rdGenGuy 12 років тому +3

    I put one of these 4175 on my trucks 350 after my older carter 625 died,
    i got SO much more power across the power curve.
    when the HUGE secondaries kick in it hauls off and keeps pulling past the 110mph mark
    i also got better around town mileage due to the small primaries.
    you can also hear the air rushing into the carb.
    note that my old carb could have been a bottle neck to my 5.7 350
    id say it increased my horsepower by at least 30+ and the torque by 50+ it pulls so well now.

  • @tabasco7915
    @tabasco7915 2 роки тому

    I have one with mechanical secondary's (double pumper) on my hotrod. Prefer it over a square bore as the throttle response is right there without a stumble from a dead start. I have had 4 or 5 square bores over the years and a dead spot at takeoff was common with every one of them. Tried tuning it out but never was successful. I have really been pleased with the spread bore.

  • @dumpgrump
    @dumpgrump 11 років тому

    That was helpful Holley!!

  • @roberturias3843
    @roberturias3843 Рік тому

    I just bought a Holley carb that looks exactly like the 4175 but all the butterfly’s are the same size.does anybody know what this is?

  • @kermets
    @kermets 4 роки тому

    While this is good info its a very Bad assumption that there is not Humans outside of the USA
    that use a Holley Carb.....so when you say this part is on the "Passengers side" that makes no sense at all
    especial coming from a world wide company......you need to sort the shit out.......

    • @harmankardon478
      @harmankardon478 Рік тому

      get over yourself

    • @kermets
      @kermets Рік тому

      @@harmankardon478 you should with your full of helpful video channel.......Not