How many turns pls...and how do you turn the copper coil....does it have a specific method or style? Mine doesn't power up even after using a diode..what could be the problem??
Master, could you please tell me how many turns you made and what number of wire you use? I have a diesel generator staor and it shows 54 ohms, maybe it is overheated, by the way it uses 0.6mm 22 gauge wire
On rewinding my gen, I counted 590 "loops" each side. Given, mine is a 10K watt gen and with 22 gauge wire. There is a website that you can estimate how long the wire is by checking the Ohms and add the gauge- given, the wire is not broken\open loop like mine was originally.
Can anyone tell how to check that style armature with an ohms meter I did the brush tracks and had continuity but I also had continuity when I went brush to shaft is this armature grounding out from the windings to the base please let me know if its good still
Hello, I'm very curious. Does that rotor have a permanent magnet. If there is no magnet, where is DC current given to the rings on the rotor. Greetings. I am from Turkey. Do you know Turkey.
Yes they have...look carefully 0:07 sec in video. They are small rectangular peaces at the and of the core. But they are only for the excite then you have an AVR (automated voltage regulator) electronics for DC current to the rotor
The AVR is supplied from the stator and it takes voltages information from the main 230V of the stator ...if voltage drops when you load the generator it push more DC current to the rotor
This man keeps bothering me with subscribe graphics. No narration or explanation. Spent too much time on cutting paper. Thumbs Down from me for irritating me with onscreen graphics.
buen trabajo
Good job, congratulations 👌.
Good work
Отлично!
Number of wire gauge? How much weight of wire
🤞🤞🤞🤞🤞🤞
Good work rewineding alternator
Thanks
what"s the name of that liquid substance u pour on the body of that windind?
Ok but you need to show routing of connections.
Good but you have present connection of terminals direction of winding starting!
Thanks for advice
Thanks for what you doing, please I have a question: how do I determine the quantity of coil needed for rewinding. Thanks
How many turns pls...and how do you turn the copper coil....does it have a specific method or style? Mine doesn't power up even after using a diode..what could be the problem??
how many ohms one of 8kva and 10kva with wire 23
Master, could you please tell me how many turns you made and what number of wire you use?
I have a diesel generator staor and it shows 54 ohms, maybe it is overheated, by the way it uses 0.6mm 22 gauge wire
On rewinding my gen, I counted 590 "loops" each side. Given, mine is a 10K watt gen and with 22 gauge wire.
There is a website that you can estimate how long the wire is by checking the Ohms and add the gauge- given, the wire is not broken\open loop like mine was originally.
@@h.mandelene3279 what is the Webside? I have a 3K Generator. How many loops i must have?
Can anyone tell how to check that style armature with an ohms meter I did the brush tracks and had continuity but I also had continuity when I went brush to shaft is this armature grounding out from the windings to the base please let me know if its good still
minmum 45 ohm
maximum 70 ohm
if wire is 25 swg
Sir yekada andi shop
Sir aarmechr me Tirn ke heesab se dalege kee vajn ke heesab se
Brass lass router diode canacktion
ভাই ধন্যবাদ আপনাকে। আমি বাংলাদেশ থেকে দেখছি।আমার ৬৭০০ ওয়াট জেনারেটর আর্মেচার বার বার পুড়ে যাচ্ছে।তারের গইজ নম্বর এবং প্যাঁচ সংখ্যাটা বলবেন প্লিজ।
Brother i believe resistance should remain between 5-15ohms
Noup...is around 30-50 ohms depending of kVA
For this type of rotors...
Hello, I'm very curious. Does that rotor have a permanent magnet. If there is no magnet, where is DC current given to the rings on the rotor. Greetings. I am from Turkey. Do you know Turkey.
yes l know Turkey
Yes they have...look carefully 0:07 sec in video. They are small rectangular peaces at the and of the core. But they are only for the excite then you have an AVR (automated voltage regulator) electronics for DC current to the rotor
The AVR is supplied from the stator and it takes voltages information from the main 230V of the stator ...if voltage drops when you load the generator it push more DC current to the rotor
Yes some have as an added advantage for establishing quick initial excitation.
How many ohms of resistance should one of 8kva and another of 10kva have?
75.
1100 of turns to supply you a 220v
just as I expected: some small piece of paper drop into the wires and can not take it out.
Good
After rewinding my generator rotor there's no power so how did you make the connection
What genertor
Number of turn sir?
what is the size of the wire sir? If for example, using 0.8 millimetres, is it possible?
2kw to 3kw swg 25
5kw 6kw swg 24 and 23
@@abdulqayyum446
Yesterday I rolled up the wire, but the current hasn't come out yet, sir, is there any input?
Kodėl nenasako kaip pajungti apvijas irkaip pradėtj vinioti ačiū
Can you please give number of turns and wire size,I'm trying to rewind a brushless rotor as the fan broke the wires.
Bhai 7 kw Generator h tar no.
Bhai app bolo bol ke batao sab kucch
People will give him thumbs down.
गूंगे हो कया?
Winding finishing is poor...
Undetailed useless...
This man keeps bothering me with subscribe graphics. No narration or explanation. Spent too much time on cutting paper. Thumbs Down from me for irritating me with onscreen graphics.