I’ve got one had apart to repair twice first was circuit board slamming in lower gear fixed second issue was sticking low or high solenoids packed with filter debris or something plus mush in bottom of pan almost like aluminum jelly now it’s like it’s in sand fighting itself to move what should I do
So I am in the process of reassembling mine at the moment. However, I am stuck. I can’t get the case back on because it seems like the K3 clutch drum won’t align with the B2 Drum in the back of the case. Do you have any advice
Hi I purchased liquid moly fluid designed for this transmission but I just realized that it doesn't have an official Mercedes approval although it does meet the specification. Pentosin Afe has an approval. Do you thing transmission fluid that meets the specification and is designed to only use in the 7gtronic with no MB approval is safe or risky?
Hello bill I'm working through an issue on my 722.9 / I found this piece of information in a forum but the image of the port layout wasn't accessible. "If you have the valve body out you can air pressure test the K1 by putting air to the hole in the trans case for K1" do you know how I could complete this test or have a picture of the port layout?
Thanks mate . You save my time and money. Thanks soo much
Very informative thanks alot now I know exactly how the process is
❤❤❤❤
Looking forward to next video
The Series is located on our VTS Channel... members.atra.com/
ماشاء الله لا قوة إلا بالله
فنان
I’ve got one had apart to repair twice first was circuit board slamming in lower gear fixed second issue was sticking low or high solenoids packed with filter debris or something plus mush in bottom of pan almost like aluminum jelly now it’s like it’s in sand fighting itself to move what should I do
Excelent tutorial...thumbs up
So I am in the process of reassembling mine at the moment. However, I am stuck. I can’t get the case back on because it seems like the K3 clutch drum won’t align with the B2 Drum in the back of the case. Do you have any advice
Good job 👍
Super Video
Hi I purchased liquid moly fluid designed for this transmission but I just realized that it doesn't have an official Mercedes approval although it does meet the specification. Pentosin Afe has an approval. Do you thing transmission fluid that meets the specification and is designed to only use in the 7gtronic with no MB approval is safe or risky?
Anyone knows if a broken aluminium bolt of the k2 can give P0717 DTC? Thanks
Hello. I have some problems with 722.9 transmission. Is jerking from 2nd to 3rd. What can be?
Hello bill I'm working through an issue on my 722.9 / I found this piece of information in a forum but the image of the port layout wasn't accessible. "If you have the valve body out you can air pressure test the K1 by putting air to the hole in the trans case for K1" do you know how I could complete this test or have a picture of the port layout?
What transmission is in the 2013 sl 550, is it considered a dual clutch transmission? Thank you👍
ماشاء الله لا قوة إلا بالله ربنا يعطيك العافية
من فضلك ممكن كتالوج وترجمة للعربية
ولك جزيل الشكر
Any training that I can enroll for rebuilding transmissions. Am highly interested
I realize it is kinda off topic but does anyone know a good website to stream newly released series online ?
Hi !! Torque for bolt Bellhousing ?? Please
the 45mm bolts are 90 inlbs, the 32 mm bolts are 96 inlbs
Hi, I can't find the next video?
The Series is located on our VTS Channel... members.atra.com/
Anyone who can work on this 722.9 4matic transmissions in Columbus ,Ohio?
Yes we do, check here: www.atra.com/ShopFinder
y u erase the whole series
The Series is located on our VTS Channel... members.atra.com/