I do like that last shot, starting it up on what looks like to be a carpark. A well known place for there to be loads of grass to be cut. Oh, wait a minute, maybe not!
What kind of drive shaft is that called ? I think they call it 2 lobed spot shaft?? I need same thing for my kubota snowblower . Wasn’t sure if there’s a name to search for it. They never show the insides of the protective plastic. All the ones I’ve seen are trilobed . Thank you
Nice. You should think about screwing the workbench to the wall with some tapcons. It'd be a really quick fix for the shaking. Either that, or put some diagonal bracing between the legs.
oh my god the PTO is the same that me have! Is it made in poland because we also got that little booklet hanged with those white things (dont know how its called in english) . we use it on t30a80 tractor, google it if you want, it has 35 hp, and 148 hours :D im very proud of my farm in Lithuania . Greetings from Lithuania!!
I like this video, Daggerwin! You could have made it a bit more educational by explaining what a topper is used for. Maybe just even a little peak underneath the hood would have been fine. Anyway, I did learn something today about PTO shafts :-)
If you're putting anything other than metal in a metal-faced vice, I would recommend using some wooden blocks. That way you avoid damaging the thing you're clamping against. Bet your neighbours love you driving that thing around though.
Personally I would have taken 2 inches more of because well you lift the machine the pto will shorten and if it can't shorten anymore you I'll do damage to the pto shaft on the tractor or mower I found this out well I broke a pto form wear and lucky had a the male part but to long by about 4 inches and tried to not take to much off so it fits the other machine and bent the thing when I lifted the topper luckily i could still use it when taken off a couple inches it's about 1 inch out of line for the bend but still dose its job
A PTO transmits power from the tractor to an implement. Power Take Off is the full name for it....or Please Turn Over if things are going badly wrong lol
Johnny 4 As for PTO shafts the length dose not really matter once when it's at it's operating length the 2 shafts are roughly 50/50 inside each other. Like it's only driving a set of blades not a mower so it don't really matter if it's cut too short like fuck all stress is put on it
Sorry daggerwin I can't accept this without you showing us some mowing. Good video look forward to the next.
Haha sorry I will try to get some footage of that
Daggerwin Vlogs We really do need to see her in action!!
I do like that last shot, starting it up on what looks like to be a carpark. A well known place for there to be loads of grass to be cut. Oh, wait a minute, maybe not!
dagger can you show us a yard tour?
That's really funny because daddy and I were making one longer yesterday for the baler
"WE NEED MORE POWER!!!"
Jeremy Clarkson springs to mind
Now you mention it!! POWER!!!!!
Jack that is what I thought to
SPEED AND POWAH
Jack that's brillliant!
Daggerwin Vlogs love the beacon on your compact tractor
What kind of drive shaft is that called ? I think they call it 2 lobed spot shaft?? I need same thing for my kubota snowblower . Wasn’t sure if there’s a name to search for it. They never show the insides of the protective plastic. All the ones I’ve seen are trilobed . Thank you
Dagger is the best youtuber ever you are the best
aboustly brillant,excellent job and every well explained
Great to see some great content on this channel again. Good luck in the future with this channel
Love this channel very interesting for a kid like me I what to be a mechanic when I grow up this is very intresring!!! For me!! :D
I heard you say one time that you are an agricultural engineer and I would be interested in knowing what type of work you do. Good video as usual.
hey daggerwin. we just got a ford 5610 and the break lights keep blowing the fuse, any suggestions on how to fix this problem?
Nice. You should think about screwing the workbench to the wall with some tapcons. It'd be a really quick fix for the shaking. Either that, or put some diagonal bracing between the legs.
Remember to always protect your shaft😂😂
Did you cut it 16cm or more? Or did you lift the mower when you messured the length. Ps. Sorry for bad english im from finland
oh my god the PTO is the same that me have! Is it made in poland because we also got that little booklet hanged with those white things (dont know how its called in english) . we use it on t30a80 tractor, google it if you want, it has 35 hp, and 148 hours :D im very proud of my farm in Lithuania
. Greetings from Lithuania!!
Ignizas no 1 cares
yeah, we bought it with 99 hours :D
Hey daggerein what is the car park thing at the end is that part of your garage?
Oh and I saw daggerwins hand omg lol
Can you show us a video of the finishing mower in use?
Hi daggerwin great video
dagger could you tell me some thing? is the American out back series gunna continue?
farmer 2005 no
Nice vid Daggerwin!
Good vid daggerwin keep it up
he looks so young for his voice and knowledge
Harper Adams have taught you well, good job
I didn't go to Harper Adams
Daggerwin Vlogs
😂 I thought you did, but nevermind
Nope, thank you for liking my work though :)
I like this video, Daggerwin! You could have made it a bit more educational by explaining what a topper is used for. Maybe just even a little peak underneath the hood would have been fine. Anyway, I did learn something today about PTO shafts :-)
Great video
how much costs in uk this pto?
If you're putting anything other than metal in a metal-faced vice, I would recommend using some wooden blocks. That way you avoid damaging the thing you're clamping against. Bet your neighbours love you driving that thing around though.
Nice advice. Luckily there are no neighbours :)
Notification squad!!
Personally I would have taken 2 inches more of because well you lift the machine the pto will shorten and if it can't shorten anymore you I'll do damage to the pto shaft on the tractor or mower I found this out well I broke a pto form wear and lucky had a the male part but to long by about 4 inches and tried to not take to much off so it fits the other machine and bent the thing when I lifted the topper luckily i could still use it when taken off a couple inches it's about 1 inch out of line for the bend but still dose its job
Is that your garage daggerwin
Hi dagger do you work on a farm
No he doesnt work on a farm
rob doig he has a large garden or a small acerage
great video I do videos of tractors at work 😁
Whats the deal with wobbling tires on the tractor??
Is it not more efficient and more tidy to use a push lawn mower. I can imagine that old Massey uses a lot of fuel
No. This things is 4ft a push mower is 1ft
Daggerwin Vlogs you are correct
Awesome!!
what brand is the mower ?
can you get muffler going up the side of the tractor.
Witch colij do you go to
Daggerwin good PTO
the back tires for the massey look like they are low because they are wobbly on the contents camera
we have a 2 meter long pto for our tedder lol
Dagger u should really try n fix ur desk to the wall as its shaking when your cutting n could cause ya to make a mistake
When will u do a face revel
real quick tip I've always been told cut pto shafts shorter than needed to reduce stress
Thanks, yes that's true. Near the end of the video I zoom into the slack I have left :)
Daggerwin Vlogs yes did see that just for people who view the video and don't pay attention to what been said but see comments
Brilliant idea :)
Daggerwin Vlogs have you got a beacon on the Massey now? 🚨
Yes
We do this all the time we don't measure it tho we also just use a grinder
Whats wrong with the tires at 5:21
Vibrations
what does a pto shaft do
Mansour Sulaiman hahaha
A PTO transmits power from the tractor to an implement. Power Take Off is the full name for it....or Please Turn Over if things are going badly wrong lol
What youtuber do you think is the best??????????
can u just do a full face reveal
Dylan G ye
Anyone from India would know how late the time is right now .
it is 11 p.m in the netherlands
are any of the fs17 server yours or fakes
None are mine
What's your name
Why make such a big deal over a 5 minute job with a ruler and a angle grinder like ?
I like to do jobs carefully
Daggerwin Vlogs Better to be safe then sorry....ehhh
Johnny 4 As for PTO shafts the length dose not really matter once when it's at it's operating length the 2 shafts are roughly 50/50 inside each other. Like it's only driving a set of blades not a mower so it don't really matter if it's cut too short like fuck all stress is put on it
Kaylem Russell Im talking about the safety lol
of the grinder not the PTO and the quality of the job
Hi
100th coment
Just show us ur face lyk
daggerwin do u have a girlfriend
1st
first