Розмір відео: 1280 X 720853 X 480640 X 360
Показувати елементи керування програвачем
Автоматичне відтворення
Автоповтор
Nice work and great footage! Thanks for throwing that up here for us. And thanks for stopping by the live today!
Not a problem. I kind of like talking to people anyhow.
Nice work and awesome camera work. Thanks for sharing. Take care and God bless.
I appreciate you coming over today. Stay safe it there
Some good camera angles on this one👍🏻 I like how you’re hogging out those lowers!
I’m actually doing more of a case match, then trying to hog them out.
He did good on this one. Sure doesn’t hurt to gasket match.
Thank you, I try not to just gut the crap out of ‘em. That’s all the 51-55 gets from me on the lowers.
@@JKSawShop that’s all any saw should get on lower transfers 😂👌
@@cajun3197 When you go to the closed port your volume goes down anyhow from the open design. Just what I have seen. So I still should have a fairly good velocity.
Looking good buddy! Let’s see it in the wood! 👍👍👍👍🇺🇸🇺🇸🇺🇸🇺🇸🙏🙏🙏🙏
It will happen before too long
@@JKSawShop looking forward to it!
A nice setup for your timing wheel. Whatever works eh..
It worked very well
Looks good buddy it'll run good!!
Hopefully
Gonna be Awesome!
Hope so
Bless your kind soul JK:)
Just trying to show a little bit of what I do. Thank you for watching, and being an integral member of this community
Some guys put 028 super Pistons in those
I might have to try that.
Piston swaps? No way it won’t be balanced! 🤣🤣🤣🤣
He may be onto something
Inside joke 😂
@@JKSawShop yessir best route for guys without a lathe sometimes
New sub here !
Thank you
Does it make it out to be 55cc's?
I don’t think it makes 55cc it is a 46mm piston, the 51 has a 45mm piston stock. Should be closer to 53cc.
@@JKSawShop gotcha
Kinda sucks on the squish still should be a good runner👍👍
One of these days I’m going to have the cylinder machined
@@JKSawShop alot of time an aftermarket piston can have shorter crown height you may wanna compare it to an oem...ive seen some .100 shorter...
I don’t have a oem 55 piston
Can you take the cylinder gasket out to reduce the squish? Or is it too much?
@@ryanpaasch7464 I didn’t use it, for any of the measuring or finished assembly.
Nice work and great footage! Thanks for throwing that up here for us. And thanks for stopping by the live today!
Not a problem. I kind of like talking to people anyhow.
Nice work and awesome camera work. Thanks for sharing. Take care and God bless.
I appreciate you coming over today. Stay safe it there
Some good camera angles on this one👍🏻 I like how you’re hogging out those lowers!
I’m actually doing more of a case match, then trying to hog them out.
He did good on this one. Sure doesn’t hurt to gasket match.
Thank you, I try not to just gut the crap out of ‘em. That’s all the 51-55 gets from me on the lowers.
@@JKSawShop that’s all any saw should get on lower transfers 😂👌
@@cajun3197 When you go to the closed port your volume goes down anyhow from the open design. Just what I have seen. So I still should have a fairly good velocity.
Looking good buddy! Let’s see it in the wood! 👍👍👍👍🇺🇸🇺🇸🇺🇸🇺🇸🙏🙏🙏🙏
It will happen before too long
@@JKSawShop looking forward to it!
A nice setup for your timing wheel. Whatever works eh..
It worked very well
Looks good buddy it'll run good!!
Hopefully
Gonna be Awesome!
Hope so
Bless your kind soul JK:)
Just trying to show a little bit of what I do. Thank you for watching, and being an integral member of this community
Some guys put 028 super Pistons in those
I might have to try that.
Piston swaps? No way it won’t be balanced! 🤣🤣🤣🤣
He may be onto something
Inside joke 😂
@@JKSawShop yessir best route for guys without a lathe sometimes
New sub here !
Thank you
Does it make it out to be 55cc's?
I don’t think it makes 55cc it is a 46mm piston, the 51 has a 45mm piston stock. Should be closer to 53cc.
@@JKSawShop gotcha
Kinda sucks on the squish still should be a good runner👍👍
One of these days I’m going to have the cylinder machined
@@JKSawShop alot of time an aftermarket piston can have shorter crown height you may wanna compare it to an oem...ive seen some .100 shorter...
I don’t have a oem 55 piston
Can you take the cylinder gasket out to reduce the squish? Or is it too much?
@@ryanpaasch7464 I didn’t use it, for any of the measuring or finished assembly.