#1 THE LENZ EFFECT (BEMF)
Вставка
- Опубліковано 15 вер 2024
- As my coil for the HV project is not yet done, I'm try to do an attempt to replicate from a Chinese guy's experiment which is very interesting stuff. Could be one of the main spices in Kapanadze device. The effect seems similar to one of my Bedini experiment, the shorting coil/winding.
#Kapanadze
#Lenz_Effect
#BEMF
Try experimenting with larger size caps (20 microF - 100 microF). In my setup, I use a large toroid transformer in series with the cap on one side and a dimmer switch on the other. The secondary side of the transformer can be connected to a full-bridge rectifier (this setup worked best for charging batteries) or to another bifilar air transformer connected to a load (resistive load worked best in this case). The purpose is to have circuit tuning ability. The circuit power factor (it changes with the load) needs to become 0 or negative. This would mean that your load is consuming reactive power. No real power is used from the grid. To notice this, you need a power analyzer. Consumer household watt-meters are not properly built to show negative power factor. The best case scenario I saw was 70 watts of power running through the load, while returning 5 watts back to the grid. Once a wise man said: "Tune your circuit to the load". A power analyzer is a must.
Thanks you so much sir for the nice input. At the moment I don't have those power analyzer. Wishing I could have one to soon.
Where was the original Chinese one?
Thanks
I put the link on my second video.
0:43 the police va a buscar a éste muchacho
Who's boy you are referring to brother? The Chinese one?
There is no back emf its induced a.c wave. It travels in both directions.
Maybe...
@@JB-20 do you have oscilloscope?
Yeah, but I need isolation transformer to do this for more safety.
@@JB-20 right well if you ever do check it out you will see that it is nothing more than a.c wave.
Ok bro, thanks.