![JB-N107Lab](/img/default-banner.jpg)
- 105
- 175 023
JB-N107Lab
Australia
Приєднався 10 лис 2014
Free-Energy Devices Research and Experiments (replications and innovations)
www.paypal.me/JBresearch20
www.paypal.me/JBresearch20
Inverter and Tesla Coil Integration test
#OneWireTechnology
#RadiantEnergyGenerator
#TeslaTechnology
#LongitudinalWave
I'm just testing for the effects of combining the inverter with the TeslaCoil, the low-voltage low-frequency with the high-voltage high-frequency section.
This is not efficient yet, the video is not focusing on efficiency although I am monitoring them everytime doing an experiment. Looping the circuit makes the system efficient or possibly to get O-U(hopefully), but the first target is getting the effects based on ideas, then modify for better performance. Looping will replenish the lost energy with the help of ambient energy sources.
This effect is like pumping energy between the Space and the Earth using the TeslaCoil.
There are several functions of TeslaCoil, one of those is acting like a receiver, harvester or collector. It is also a transmitter and a communicator between Space and Earth and many more.
I will be using most of the TeslaCoil's functions as much as possible for the benefits of the system. So a long journey on this experiment.
#RadiantEnergyGenerator
#TeslaTechnology
#LongitudinalWave
I'm just testing for the effects of combining the inverter with the TeslaCoil, the low-voltage low-frequency with the high-voltage high-frequency section.
This is not efficient yet, the video is not focusing on efficiency although I am monitoring them everytime doing an experiment. Looping the circuit makes the system efficient or possibly to get O-U(hopefully), but the first target is getting the effects based on ideas, then modify for better performance. Looping will replenish the lost energy with the help of ambient energy sources.
This effect is like pumping energy between the Space and the Earth using the TeslaCoil.
There are several functions of TeslaCoil, one of those is acting like a receiver, harvester or collector. It is also a transmitter and a communicator between Space and Earth and many more.
I will be using most of the TeslaCoil's functions as much as possible for the benefits of the system. So a long journey on this experiment.
Переглядів: 482
Відео
The Inverter Section(Low-Voltage/Low-Freq Side)
Переглядів 4873 місяці тому
#OneWireTechnology #RadiantEnergy #LongitudinalWave #TeslaTechnology #FreeEnergyResearch #OverUnityExperiments This is all about the inverter section(Low-Voltage/Low-Freq Side). Using the same concept of my HV voltage section using class E type circuitry and using the same oscillator controller board except without GDT and having different oscillating freq.
Testing the HV Driver board with the Small Scale Tesla Coil.
Переглядів 4463 місяці тому
#TeslaCoil #LongitudinalWave #RadiantEnergyDevice #OneWireTechnology #WirelessEnergy Testing the HV driver and it seems ok. Next will be the LV driver or might be the step down transformers. This is a continuation of my experiments from 2020.
Ongoing Project
Переглядів 3674 місяці тому
#Tesla_Coil_Experiments #Tesla_Coil #Radiant_Energy_Device
UCC27524 tests (wrong markings/weak signal/no signal)
Переглядів 1394 місяці тому
#UCC27524 #UCC27525 #GATE_DRIVE_CHIPS #SSTC_Gate_Drive Gate Drive chips(Chinese) fails. Tips are in the last part of the video.
SSTC as HV Source generator for the solid state generator project.
Переглядів 2875 місяців тому
#SSTC #Class_E_TC #HV_Generator Not the final TC design, this is one of the old coil in past experiments. I just use them for testing the new controller board and it seems having a positive results. Just the gate drive section has that problem, recently purchased chips are faulty. So I try to purchase again and still hoping. These are the Chinese made gate drive ICs.
Spectrum Analyzer 2024 - a quick test.
Переглядів 2618 місяців тому
Music: A View to a Kill - by Duran Duran Music: Winter Wonderland - A Holiday Season's project using a new kit version(breakout board). Controlled by an Arduino Nano microcontroller board. All LEDs are directly hooked up to the Nano terminal itself without any MOSFET or Bipolar transistor driving those LEDs in parallel for each spectrum band. Not advisable, just a quick test. You need a driver ...
E-Torch 23 The Basic Operation -1
Переглядів 3728 місяців тому
The Basic Operation showing SW's as the MOSFETs There are two types of MOSFET in the device, one is the N-Type driving L1 and the other one is for P-Type driving L2. But, here in PART-1, I'm using SWitches to make it simple to understand. Some other components are missing and will be added in the next coming series. Disregard the components value. Capacitor value like 1000uF can be of any betwe...
Eternal Torch 2016 update (new version)
Переглядів 1,5 тис.8 місяців тому
This is not actually running eternally and is not belong to free energy devices. This is an updated version of my old project back in 2016. Still pushing by a BATTERY(CELL) and a SUPERCAPACITOR. Enxtending battery's charged energy. At the moment I'm making another projects outside free energy field and have sell them, the proceeds will go to my free energy projects. I'm making plasma reactor an...
Bi-directional Motor Controller (4-relay ver.)
Переглядів 213Рік тому
Still collecting parts for the radiant energy and motorized experiments, and at the moment while researching I come across this little projects that need to run. This is a DC motor controller that can run forward and reverse direction and a stop/reset function with LED indicators. I knew it can be done in just only two relay combination but there are a given items that must be used. But, maybe,...
#2 THE LENZ EFFECT(BEMF)
Переглядів 918Рік тому
Here's my second attempt using function generator to help me making a quick connect and disconnect the shorting wire. This effect is similar to my Bedini experiments. Here's the link of my Bedini experiment and the orignal link of the said Chinese stuff: ua-cam.com/video/5bpBeQ1Gik8/v-deo.html ua-cam.com/video/wLL_H1ZrKcA/v-deo.html ua-cam.com/video/6wM62LydLd0/v-deo.html
#1 THE LENZ EFFECT (BEMF)
Переглядів 811Рік тому
As my coil for the HV project is not yet done, I'm try to do an attempt to replicate from a Chinese guy's experiment which is very interesting stuff. Could be one of the main spices in Kapanadze device. The effect seems similar to one of my Bedini experiment, the shorting coil/winding. #Kapanadze #Lenz_Effect #BEMF
#2 NEON SIGN TRANSFORMER Test 2 with Diode and Capacitor (0.5mm and 3mm gap)
Переглядів 660Рік тому
NST Test 2 Still no signs of any problem. Probably due to lower input Voltage. I don't need great sparks so this would match my need. •NST: 5kV 30mA •VARIAC: •Capacitor: 100pF (doorknob type) •Diode: 12kV(microwave oven HV diode) Gap Distance: 0.5mm and 3mm Tested with 0.5mm to see if it will shut down. #Neon_Sign_Transformer #RadiantExperiments #Don_Smith #Kapagen
#1 Neon Sign Transformer +Variac/Bulb (unboxing and testing)
Переглядів 1,2 тис.Рік тому
#Neon_Sign_Transformer #Don_Smith_proj #Kapanadze_proj #Tesla_experiments #Unboxing
(!)TDA8425 Digital Tone Control + Arduino Nano
Переглядів 1,3 тис.Рік тому
(!)TDA8425 Digital Tone Control Arduino Nano
Kapanadze/Akula Controller (Scopeshots) -my own version.
Переглядів 841Рік тому
Kapanadze/Akula Controller (Scopeshots) -my own version.
2ch SignalGen/Controller- with schematic + XY-LPWM3
Переглядів 900Рік тому
2ch SignalGen/Controller- with schematic XY-LPWM3
Circuit use to extend cell/batt energy.
Переглядів 7322 роки тому
Circuit use to extend cell/batt energy.
Current Boosting Project- lead-acid charging device
Переглядів 1 тис.2 роки тому
Current Boosting Project- lead-acid charging device
#21-6 Harvesting Energy(first layer coil)
Переглядів 5703 роки тому
#21-6 Harvesting Energy(first layer coil)
#21-4 The Ferro Resonance Effect -w/ Scopeshots
Переглядів 7413 роки тому
#21-4 The Ferro Resonance Effect -w/ Scopeshots
#21-2 Update and Preview of my controller
Переглядів 2103 роки тому
#21-2 Update and Preview of my controller
Dear if you are getting 40 W output driving a bulb then what is the actual input power being consumed at that moment? Is it giving you COP>1??
Estimated about 50% efficiency. This is just a proof of concept...to see the effects. Not the final setup. I used cw tesla coil driver...so dissipated more heat. I switched to interrupted driver.
Instead of moving the camera along the bulbs, wires and coils, it would be better to post a clear diagram of the whole thing.
If you watched my videos... you will understand that doing so is redundant and more boring. Experimenters easily understand what it is and knew it. Also, tons of schematics were posted in google. Kacher or what the correct spelling is, is the same as Slayer Exciter. The setup and ideas were uploaded many times. My last series of videos are also using the same concept, just trying to improve the performance and have some minor twist.
... and I believe you only watch the intro not the whole video.
Puede bang malaman ang component at circuit diagram?
@@reyantonio578 Hindi kailangan ang mga iksaktong component at circuit diagram sa ganitong proyekto. Kasi hindi ito gumagamit ng matinong mga pyesa na nabibili sa palengke at wala itong arithmetic na kasali. Na pwede kayong maligaw nang landas. Ang mahalaga ay ang konsepto na maintindihan. Nang sa ganun kahit kayo kung kaya nyong magbasa ng mga pyesa at alam ang mga trabaho nila ay kaya nyo ring makagawa ng kaparehong epekto. Ang proyektong ito ay batay parin sa mga lumang proyekto na mapanood uploaded sa mga taong nakalipas. Simpling inverter at basic solid state tesla coil gaya ng slayer exciter ay pwede na.
@@JB-20 thank you for your reply
May napag-umpisahan kana po ba?
The answer to all this free energy is 90deg. Thats is it the andwer. Stop` learn to collect magnetic waves not electro waves
I love the idea but its too com-plicated. Donn smith shows you the way very. Bsic and cost effective. ✌️❤️🤘
Здравствуйте а какая осылографа сигнала на выходе импульсы благодарю
Sory brother, during those time I never had a HV probe. But based on some of my experiments and analysis it's a series of sharp pulse with high freq sine ringing that gradually dampen.
And HF. The Don Smith device. HV and HF for magnetic resonance energy crafting.
Wow you are so good man
Thanks bro!
Falta la coneccion a tierra
@@user-dg3un2up8b Yup, but it works without ground. However, more effective having Earth ground connection. The more important thing is idea. Also, not all the time you need an Earth ground and be dependent on it. We need to think more than that. What if you want a device that is compact and portable?
Это ты напряжением с трансформатора теслы толкаешь ток?
Yeah.
Нічого взагалі не зрозуміло.... Головне, що музика б'є по мозку...
I'm just trying to get the effects of stepdown tranformer from teslacoil.
whatever assembly you do and no matter how much power you have to apronde a light bulb, two or ten, the secret is in connecting to the ground and how to extract energy from there to go self-sustaining even just Tesla coil without putting consumer on it if you want self-sustaining need to know how to use the earth as an energy source because Tesla that Discover radiant montages are dozens but self-sustaining few have succeeded and understood
Agreed. I made my own configuration based on my self understanding on this matter. In short, I do my own system. So, this is not totally a problem. I don't rely on what others do, it will only help experimenter more confused. Earth ground really more important but I'm doing together in my experiments for studying a system that is more compact which doesn't need physical Earth ground cable. Time comes my system can run nicely without Earth.
@@JB-20 yes, it is best to go on your own ideas and tests because many movies on youtube is only for views I'll try your idea with inverter and Tesla coil and use the air and earth to see what they get anyway super What You do tests help you understand the mistakes and get the results👍
Do u talk about this schematic at any forum , plz share the link , i also have same setup, i will share my experience and schematic, and talk about this technology at your given forum
I don't have involved in any forum but the schematic is already there.
@@JB-20 do u talk about topruslan schematic?
It didn't work as what is expected on the schematic. Yes it run but only to light up bulb or any DC load. Not self running device.
but Assembly with flyback and inverter and not worked he that seemed more ok
Can use flyback but in different way like cap dump. But at higher resistance/impedance inverter output transformer.
Kinda hard to make out.. please post a schematic
Great setup. I was thinking that you could change to pulsed DC and fill a cap and then use a trigger transformer to convert to 50 or 60 hertz and use a commercial iron core transformer for the output. I have not tried it yet but I believe it should work.
Yes, that's the reason I study myself for a long time how to configure this to make the output 50 to 60Hz. Although we can still make it at higher freq by converting to DC then to full-bridge like conventional pure sine wave inverter. This is just another way and thinking if possible. I can directly use with a 50-60Hz transformer but it seems they are consuming more than this since this one is chopped a hundred times per 50% than a continues 50% duty.
@@JB-20 Fantastic! I am going to have to see how much that iron core transformer eats in my system. Thank you for the heads up. I might have to build what you have built. I will be in touch my friend. I may have to ask some in depth questions. thanks again.
Any diagram please? Is amazing this setup.
Its not final yet but I put the basics in some of my previous video.
Hello, it is a small receptor with antenna, condensator and diode?
Yup! You're correct.
aus ang reciever ah working well.cgrdo lht ng conductive jn within range ng tesla transmitter mo my charge narin
Yes bro. Conversion nalang para makinabangan. Collect pa ako para sa next move.
boring
Sorry.
The more I see Don Smith replications, the more I am confused ask to why there is a step up if the same frequency is retained from the originating high voltage to the step up and then to the step down . The more Zilano's simplified makes sense. In addition to that Don always spoke of Marx generators as well as Cockcroft Walton multipliers. So if we are only going for more voltage (pressure) to fill the caps then certain parts are unnecessary. If you know what I mean...He did say that there are parts in there because people expect them to be in there. This follows perfectly my line of thinking. I would love to step up frequency and voltage however that never seems to be the goal.
I do not use Marx nor Cockcroft in any of my system. That, will allow the slower speed of electricity to flow. The more stages with cap(s) charging/discharging especially with those metioned above which have lots of series caps are a no-no to me. Step-up transformer is I believe much better and faster. My reasons to use HV is to permit the use of SG which is the main element for recuperation or in any system with feedback or looping circuitry and also to communicate between the air and earth(I do not follow what exactly Don's system is). It was only before that I wanted to try those two mentioned systems but after my several experiments, I learned that fast charging is also important but, not restricted on that. There are some possible ways that need to experiments. Zilano's simplified version(the reversed tesla as what late fellow researcher said) is good. But you cannot achieve good result if your high voltage source is too weak. It sometimes a reason why you should need another step up stages. But in that case you're sacrificing the speed of the process. The more charging and discharging the slower it will be. In order to eliminate this, you concentrate on the first stage to have voltage that is enough for cap dumping with a SG(depends either purely solid state or not). So just in the very beginning of the circuit, obviously showing the possible outcome if the efficiency will be good or not. However, there are possibilities that can be refine and retune at the following stages. Frequency figure mentioned in Don's is not so important since SG will dictates the final frequency going to the output. It is only needed to be high enough to have greater discharge on primary(I may be wrong). *Freq on the input side then to the output side is sometimes important to maintain the transfer of energy, a give and take, transfer of water bucket to bucket ...to make it balanced and in harmony avoiding shortage of energy at the output. But, sometimes not necessary. Don's, like other's, some parts are just there to confused viewers. [This experiment is a bit older. I am still refining this.]
Man, this beat is so nice I can’t even focus on your content.. lol
Sorry about that mate. I've turned it down when I started talking.
@@JB-20 haha I’m just messing around
Ok
engineers never invented these things. Those were from technicians, and they have time and attitude. Thats all. Its works when experiment it from scrap than thinking from what we learned.
Yes, might be. But they may trying different things with almost similar concept secretly. Or maybe another concept but similar outcome. I don't know, just my thought.
Hello do you have the diagram the drawing thank you ❤
I'm preparing...
well iterated!
👏
this is 10 000K ???
No, just 5kV/30mA model. There are other model that are higher kV.
I understood perfectly well what purpose you are pursuing in the generator. Who Is Your Idol?
No other than Nikola Tesla, and I'll stick to what the basic principle.
I've looked through all your experiments. What are you aiming for?.Do you have a final solution? Thank you.
It's all about the electric generator. I tested most of the stages/section by section. Some may gave me good if not perfect results and some may not(reasons could be due to the inappropriate components). But at least I tried and learn by myself thru correct and error moves. I might not arrived the final solution but atleast I have those several ideas that need to try. Once I made a complete prototype, probably that's the right time to say.
@@JB-20 TThere is a scientific applicant like ROSEMARY AINSLEY. She also has very good results and solutions. In particular, she works with Tesla bifilar coils. I repeated her experiments and received super-single devices. Thank you for your efforts.
@@user-hp8qw2yl4j Thanks for the info, I believe I heard about her somewhere in the PJKbook pages and might be here in YT. Seen some of her works but maybe not really gave good attention to me that time that I maybe need to come back and see. For the moment, I need to focus in what I've started, although I have a few different devices and concept around. I also need to revisit some of my past experiments and maybe it can be integrate with my new stuff.
@@JB-20 OSEMARY uses a second OED, which returns it back to the power supply. And this can be obtained thanks to Tesla's bifilar coils. Please note that in addition to the reactive currents that light the lamps from the bifilar coils, there is also a huge electro-static field around the installation. This field can similarly be collected on a capacitive antenna and sent to a power source. This reduces the current consumption, in particular if powered by a battery (rechargeable batteries). For example, this is what Donald Smith does, he said at the conference that he has a generating system and a collecting system. It converts the electrical component into an electrostatic field and energy. returns the fields to the battery. Bifilar coils based on the Rosemary principle fit perfectly. In fact, it is the same as the Tesla transformer, only the winding is wound in two wires and the second bifilar circuit is wound along the top, also in two wires. The energy is very huge coming out.
This is what I did in the past experiments that I need to recreate. I may achieved OU but may also not. I temporarily stop after one of my batteries died during the test and kept them until typhoon destroy them.
Always fantastic builds on the bleeding edge of technology!!! Just incredible....
0:43 the police va a buscar a éste muchacho
Who's boy you are referring to brother? The Chinese one?
Miito legal voce pode compartilhar o esquema?
Yeah sure I'm preparing for the video. But this setup is in development.
،👍🏼👍🏼👍🏼
We need to revive this technology
That's what I'm trying... Just a mini size, though.
@@JB-20 agreed, that's the key to gain from the ambient
@@elgroovy That's based on my experiments.
What is the diraction of current? It seems goes back to power supply? Measurement with such shunt resistor at 12Mhz can give huge error, since it has inductance.
Honestly, I'm no expert about all of these. I don't have any idea what's the best way of measuring current in this kind of setup. I ask different individuals and from any groups but I failed getting the best and correct answer. But I believe this is the best way I can using this what you called shunt resistor. When we talk about high frequency, especially this one wire technology is only seems open circuit physically...but not in reality. There is an unseen virtual capacitor there. Sometimes they called parasitic capacitor... actually an LCR across the open terminals. So speaking of electricity, they are still connected thru those parasitic elements(LCR). And by using this shunt resistor isn't actually giving huge error, but giving as close as possible and is the best way(I will accept, I could be wrong). My only guess that could be wrong is the resistor value used. Please share if you have idea that favor to the precise measurements regarding this setup. Thanks for the input. Note: the PSU reading was almost closed to the results using the shunt resistor. Digital display on my PSU wasn't accurate due to the speed of extraction of current so this shunt method could be ok.
@@JB-20 You can use analog ampermeter it will show avarage value. Regrding of readings of PS, on your video the reading of power supply displays shows 0A.
chematic
Will post sooner. It's not finished yet. It's under development. But will post a short video.
@@JB-20 спасибо
😂😂un grillo
A lot in my area, 😅.
I can answer that now... Tesla system is a "ground break" for higher altitude currents to flow through your disturbance and to ground ;)
You're amazing buddy, I'm hoping to meet you there.
Thanks mate.
Aus ah
Salamat tol. Lilipas narin yan...parang ads lng.
aus nb basement lab mo idoll..
Hindi pa rin po, pangit yung nagdala dito, bagal ang trabaho ng rip-rap. Naging pending kasi delikado sa tubig kapag lumakas ulan, umapaw ang tubig mula sa ilog na nasa tapat ko lng. Parang basura pa ang sitwasyun ko dito diko ma arrange mga gamit.
Thanks for sharing Keep up the good work
Thanks for continued support.
un oh.actibo nnmn c idol hahaha
Minsan ganyan para malaman na hindi pa tuloyang bagsak ang karera.
ang pagbabalik
nabuhay din s wakas..
Buhay pa tol. Nag ipon lng lakas.
haba ng pahinga mo idol..
@@dapakers Nag-iipon para sa ginawang projects.
anu ung bagong gadget mo idol n laser etching.. gawan mo din sana mg video.prng unboxing
Sana makita kopa yung video na ginawa ko, wala nga lang salita doon.
Hi, very good experiment ,i know this effect, i make lead acid battery charger same as you described in this video , this charger consume less current when charging the battery and when open circuit this consume more current due to LC circuit resonance
Yeah, right!
use another circuit to pulse it with capacitor discharge. Like high voltage primary of nikola tesla.use here as pulser for secondary.remember primary circuit of nikola tesla capacitor discharger whn dischgr create powerfull magneticfield that can couple to the primary of this transformer and captured by caoacitor.
Before some sort of shortingbthe secondary. Why not add magnets in the surrounding area of tranformer. To strenghten magnetic field collapsing tht is captured by caps
@@dapakers Can be added with magnets but not suitable if you want higher frequency.
@@JB-20if i can remember floydsweet run his device 50 to 60 hertz only. No high frequency. With Bar of magnets and bunch of coils.i think 50 to 60.maybe tesla HF style is irrelivant for this to work.on this setup
show MOT transformer consumption...
There are another videos showing MOT consumption with loads. This coil don't give benefit to the system. There will be another configuration that will hopefully be upload soon.
nice ! got most of the components it looks like ! well done. now have you got an earth ground somewhere ? the earth ground is one of the things that completes the system in my experience. you can see the influence of the ground if you attach a light to the l2 and then the other end of the light to an earth ground. just by trying all sort of different contact points i often fin out where the earth ground works best. and im not convinced that we need to spend loads of money to get results, i think its more to do with understanding. at least for a proof of concept. i think first step is to get good amounts of energy coming off L2 and figuring out how to channel/store/flow/ground it ! : )
Yes, you're right! Understanding the system is really more important. No, during the experiments, I didn't find ways to get good ground in my position, and I used my bench PSU, which was just repaired at that time, which spoiled my Tesla coil. My observation is to better use batteries for these types of experiments. This is to avoid bad electrical loops that damage equipment. Yes, I have had some experience with how having good ground improves performance. When I was on the rocky hill, I used trees as a good path to the ground, using #4 nails.
How you synchronized the two generators with each other?
I made an oscillator to drive the first coil thru MOSFET 1( the low freq squarewave) then half of its cycle taken (from the same oscillator) and chop many times and sent to the MOSFET2. In other words one osc for the two MOSFETs. One used the full cycle, and the other one for only half the cycle but the time had been chopped to make more shorter squarewave pulses.
I made another controller that is easier. 1 with scheme: ua-cam.com/video/itmTX4iMfkg/v-deo.htmlsi=6x5va7YqILEo15yx 2 with scopeshots: ua-cam.com/video/jkeccI4qZm4/v-deo.htmlsi=JUZ8cjF_O91We8o1
it means that the kapanadze coil is just a passing coil, all the secret is in the transformer and in the storage
I only tried to learn this stuff and found out this configuration doesn't work. This version is coming from someone not from the original T.K. It is hard to replicate from the original design since there were no any means of something to copy. All you've seen in the internet are all proposed scheme from different individual. Still, I am working on different configuration but based on my own understanding. The ideas are mainly from N.T.
@@JB-20 I just got hold of Kapanadze's original schematic drawn by him with his pen on a notebook ...
@@TitiProsopel Wow, how lucky you are! The coil may give some benefits but I believe there's something more important.
anu ng balita brad..bgla kng nag stop.kala ko pa nmn nala breakthrough kna. o tulad krin ng ib.n pg alam n ang sikreto e bgla nalang rin nwwla.kasi iniisip nila nanakawin s knila ang k alaman nila..heheheheh3
Nag iisa akong gumawa brad sa sarili kong experimento, kaya minsan makagawa ng series minsan naman mawala. Sanhi yan ng kawalan ng pundo. Mag- iipon. Buti sa inyo maraming donation. Any time pwede makagawa.
Yung mga ginagawa ko exposed napo'yan mahigit sangdaang taun na. Kaya walang dapat nakawin. Gumagawa ako ng mga preparation para makagawa ng ibang series of videos. Kailangan ko rin kumain kaya kailangan ng sariling pera at yung ibang para sa projects.
Sa mga seryuso at totoong experimenters namimigay ako sa kanila. Kaya paano maging takot nakawin? Kathang isip lng po yan sa mga ibang desperado na mga spoon feed.
Pero totoong nanakawin rin. Kita mo naman sa mga online selling. Iba nyan kinuha lng sa nakita sa YT at benebenta ginawang produkto at pinagkitaan.
ua-cam.com/video/aqy5fORozHM/v-deo.html aralin mo yan brad. Di po 'yan sekreto.