How to Properly Drill into a Windshield Chip for Repair
Вставка
- Опубліковано 26 лис 2015
- Drilling into a windshield is a delicate process, but we show you how to get it right with the right tools and process. This means teaching you how far to drill, how to anchor a long crack, and how to use the spring hammer to create a bullseye for long cracks.
To purchase tools and equipment mentioned in this video or to purchase easy to use windshield repair kits to get started with windshield repair visit www.clearsolutions.ca
Reach out to us on
Twitter: / clrsolutions
Facebook: / clear-solutions-canada...
Google+: plus.google.com/u/0/100035390...
Clear Solutions Canada has been serving windshield repair technicians since 1984. Our technical service personnel have decades of windshield repair experience. Please reach out to us if you have any questions or concerns about windshield repair or auto glass repair.
Our goal is to enable technicians, consumers, and businesses to repair windshield chips in-house.
Thanks for sharing your experience!
I did it like that with a bulls eye and all and it still spread again!
probably didn't drill deep enough or it was already spread past your drill point but was not visible.
I've seen other videos where they intentionally drill all the way to the laminate layer and don't use a spring tool at all. Is one method better than the other?
Details from this video with units of measure: .042 inch minimum hole depth. .060 inch maximum hole depth.
Bloggers elsewhere said the top glass layer is usually .078 inch thick.
I'd done a few hundred chip repairs and can answer that.... for sure, 90% of top glass layers is between .068 and .079 inch thick (1.75mm and 2.00mm).
I think what this video is saying is, yes they are definitely that thick but you NEVER drill that deep as you'll hit the laminate layer. .050" is probably good and .060" is getting damn close to the LL.
Unless that's what you were pointing out?? IMHU
@@Initechsystems do you use depth guage or just got an eye for it?
@@Initechsystems looks like the idea is to leave enough of the glass thickness, before the laminate layer, to create a conical 'bullseye' crack as a stress relief to prevent the crack propagation..
just starting out repairing glass and found your video educational, where did you buy your depth gauge at ?
Stupendous.
Perfect
perfect!
Stuff works.
Qual a melhor resina pra fazer esse trabalho
I cant afford a new windshield right now, I am going to attempt to stop mine from splintering, I have used repair kits in the past to fill small cracks and bullseyes but was wondering if I successfully stop the spread, can I drill a hole or two along the crack to help fill the splinter with resin or is that too risky?
What size drillbit do you use for that?
Great video! Do you guys sell the drill depth guage used on the video? If so, I'd like to purchase one, thanks!
Hi Carl- we do! The depth guage is part of the Spring Hammer multi-tool clearsolutions.ca/product/spring-hammer
Your link does not work
What type of bits did you use in the Dremel?
What dremel bit number are you using?
It works try it again.
❤️👍👌💐😍🤗😋
I can easily drill without using the tool to measure the depth. Thanks for sharing.
Spring wat ?
I need an email to write??
Do you have to make a bulls eye
It stops glass from further spread. Without it, you have 50/50 chance that spread will progress in the future.
Such dramatic music lol
What size drillbit do you use for that?
Tapered Carbide Burs .047.