Manual Swapping My R34 Skyline!

[@neutraldown6271]

manual conversion:
gearbox
clutch/pressure plate
clutch master
clutch alignment tool
flywheel + hardware
driveshaft
clutch pedal + dust boot
b stamp cross member
gearstick rubber boot
rear main seal
clutch fork bearing
sandwich plate
brake pedal cover
penetrating oil
degreaser
steps
1. lube necessary bolts
2. drain auto trans
3. remove exhaust
4. remove driveshaft
5. cut lines
6. remove auto
7. remove flywheel
8. degrease back of motor
9. head drain?
10. remove spigot bush
11. remove rear main seal
12. install new main seal
13. install new spigot
14. install sandwich plate
15. install flywheel (loctite)
16. clean flywheel
17. install/align clutch plate
18. install pressure plate
19. remove alignment tool
20. remove/install clutch fork bearing
21. install cross member to gearbox
22. install clutch fork to gearbox
23. install clutch for dust boot
24. remove interior (auto shifter)
25. install gearbox
26. combine drive shaft front/rear
27. install driveshaft
28. cut firewall for clutch master
29. install clutch master
30. install clutch pedal
31. bleed clutch
32. cut brake pedal down
33. fill gearbox with oil
34. install shifter boot
35. cut auto loom inhibitor
36. splice reverse lights
37. install cluster sticker
38. check list
test drive

[@ebenn733]

Isn't the speed sensor in the gearbox? I am currently undergoing a manual swap with the small box. Also the RB20DET gearboxes (Which is the N/A box) comes with a cable sensor?

[@chayyboi]

Rb20det boxes and na rb boxes are different. The gears are thicker on the turbo boxes

[@DaxReihana-RFB]

Hey guys I forgot to mention the R33 front half Manual driveshaft that I used was from an ABS model 🙂

[@neutraldown6271]

hey bro mean video, just wondering roughly how many hours this took you? cheers

[@SoldierOfFortune900]

Wow love your work! If I could do that, I'd buy an auto 4-door Skyline in a heartbeat. They are cheaper and less beten up

[@billyflavell5295]

Great job mate!

[@Brax267]

for a home job and by yourself fuck you did a clean job new sub !!

[@DaxReihana-RFB]

Cheers thanks man! 💯

[@strike_420x]

Good shit man!

[@DaxReihana-RFB]

Thanks man cheers for the support! 💯

[@omarhuerta260]

Should list out what you bought to help us out 😅

[@kaydenplayle4232]

Great vid bro! Quick question for ya, what sized drill bits did ya use for clutch pedal?

[@daveboyo920]

Hi bud, can you give me the info for the overlaid cover for the dash, gotta get one !!....great upload and new sub.....👌👌👌

[@DaxReihana-RFB]

Hey bro I brought it on Trade Me NZ. Was under R34 Cluster Facia! Thanks man 💯

[@daveboyo920]

@@DaxReihana-RFB much appreciated bro, will look it up hopefully they ship to the UK.....🤙🤙

[@teawherangicassidy-whiu5716]

Love the mahi bro 💯💯

[@DaxReihana-RFB]

Cheers bro appreciate it! 💯

[@traceereihana9960]

Awesome

[@thepoliticalpatty9184]

Hey bro, how did u go abt auto trans light? Mines constantly got auto trans on

[@bpi537]

sick! where you from man?

[@DaxReihana-RFB]

Thanks man! From New Zealand 👌

[@imCylo]

Hey, just curious, how much did this swap cost?

[@professorsecret4960]

You don't keep your 34 covered outside?

[@stevenlarkin2869]

Where is the cluster cover from

[@gpgaming2136]

I wanna do a manual swap on a primera p11 so bad

[@jamieoreilly2064]

Does that cluster stick on cover the auto bulb that comes on after removing the trans?

[@ebenn733]

You can just take the globe out. It is really easy. But by jumping the wire the ECU should think that it is neutral

[@harmonymaniapoto4877]

Kia Ora, how much did this cost you all up for all the parts? Can you list the parts please

[@DaxReihana-RFB]

Hey! Sorry I’m not good at replying on YT 🤦‍♂️ Message me on insta 😊

[@avinashsingh76]

What gearbox u use from what car?

[@ebenn733]

Looks like an RB20DET trans they mainly came out in the R33 N/A (RB25DE motors) cars and the R34 HR models (RB20DE motors)