I have the same exhaust, love it! I took the baffle out and it sounds better, IMO, and didn’t make it much louder. The +1hp is a nice freebie too, lol.
I just installed the same exhaust on my ‘23 XSR900, it fit perfectly. Looks and sounds great. I actually cut the baffle 2 inches shorter than it’s original length, made it louder than with full length baffle but not as loud as no baffle at all. Really liking it. Good video
I know the xsr900 has a little different swing arms than your bike, but on my exhaust there is much better gap between it and the swing arm. The LV came with a couple of aluminum spacers, one 30mm and one 50mm. Are you sure you used them? Look at my review video - at the 5:50 mark and again around 8 mins when I run it: ua-cam.com/video/TILy8F7CbKo/v-deo.html
@@rickychan8160 there are a little bit on deceleration in gear but not obnoxious at all. I’m not sure how much of it is contributed by the FlashedByVCyclenut ECU flash. I just got an Insta360 and a Zoom H1N audio recorder. Still experimenting with them but expect to have some more video with much better audio of the exhaust up in the next 3 weeks or so. I absolutely love the tone of this LV1 exhaust with the CP3 engine
@@rickychan8160 I should add that I had VCycleNut’s ECU flash even before putting on the LV Exhaust. There were no pops but that was with the stock exhaust which of course has the catalytic. From what I understand it, the pops are present even with OEM exhausts, but between the cat and their baffling the pops are not audible.
I think that exhaust looks really good and sounds good not too loud and you can still take out the baffle. I like the underbelly exhaust just haven’t plunged yet,but it’s on the 🔥 for sure. Definitely load a small clip on the track to hear the potential of the exhaust. Thank you for your content
The baffle is in the main underslung unit before you fit the pipe that directs the heat away from the tyre its in there very snug but take that out and she'll sing brother think I found it on 'Moore mafia' while he was remapping 👍love the bike dude ❤ stay safe
Hey man what brand did you get all your carbon pieces from including the side panels? And also where did you get your integrated tail light? I have the same bike and everything you did makes this thing look dialed brother👌
I have a 2023 XSR900 and just ordered one and it arrives Wednesday. Will be putting up a video soon. Based on a Moore Mafia video it does fit. I also texted him and he confirmed when they installed it on a ‘22 it fit with no issues or modifications
Respect for getting the rear tire in that condition
Exactly the one I want on my new SP
I have the same exhaust, love it! I took the baffle out and it sounds better, IMO, and didn’t make it much louder. The +1hp is a nice freebie too, lol.
I just installed the same exhaust on my ‘23 XSR900, it fit perfectly. Looks and sounds great. I actually cut the baffle 2 inches shorter than it’s original length, made it louder than with full length baffle but not as loud as no baffle at all. Really liking it. Good video
I know the xsr900 has a little different swing arms than your bike, but on my exhaust there is much better gap between it and the swing arm. The LV came with a couple of aluminum spacers, one 30mm and one 50mm. Are you sure you used them? Look at my review video - at the 5:50 mark and again around 8 mins when I run it: ua-cam.com/video/TILy8F7CbKo/v-deo.html
Any pops from the exhaust? I also have a 23 XSR900
@@rickychan8160 there are a little bit on deceleration in gear but not obnoxious at all. I’m not sure how much of it is contributed by the FlashedByVCyclenut ECU flash. I just got an Insta360 and a Zoom H1N audio recorder. Still experimenting with them but expect to have some more video with much better audio of the exhaust up in the next 3 weeks or so. I absolutely love the tone of this LV1 exhaust with the CP3 engine
@@raisingcane225 nice yea that’s kinda what I’m looking for… still deciding what to get but probably going with the Same one.
@@rickychan8160 I should add that I had VCycleNut’s ECU flash even before putting on the LV Exhaust. There were no pops but that was with the stock exhaust which of course has the catalytic. From what I understand it, the pops are present even with OEM exhausts, but between the cat and their baffling the pops are not audible.
I think that exhaust looks really good and sounds good not too loud and you can still take out the baffle.
I like the underbelly exhaust just haven’t plunged yet,but it’s on the 🔥 for sure.
Definitely load a small clip on the track to hear the potential of the exhaust.
Thank you for your content
I need your mod list bro, the bike is aesthetically perfect with your after market tweeks. Like "OEM+".. very clean, not over the top.
Hey there do you notice a difference in the Performance to the stock exhaust? Is it better or worse?
The baffle is in the main underslung unit before you fit the pipe that directs the heat away from the tyre its in there very snug but take that out and she'll sing brother think I found it on 'Moore mafia' while he was remapping 👍love the bike dude ❤ stay safe
can you put it back again after you remove it?
Hey man what brand did you get all your carbon pieces from including the side panels? And also where did you get your integrated tail light? I have the same bike and everything you did makes this thing look dialed brother👌
hi ... repeating WIll's message ... would like to know where you got those side panels carbon covers please ? brand name ?
Maybe you found it but it looks to be Powerbronze Infill Panels
Better and louder than the Akra ?
Hey man what brand did you get your carbon side panel ?
The exhaust has the Db killer installed? Or is it without Db killer?
0:33 hast du einen Internetseite für mich wo du dir Carbon Teile gekauft hast?
ok I have the same Bike what steering damper is that exactly
Where did you buy your windbreaker (bubble)?
hi, does it have a catalytic converter? is it removeable?
How do you fastend your plate all the way in there?
Which tank pads are you using?
Do you have to tune for this exhaust?
As well as your stabilizer?
Wo hast du das Rücklicht her ? Ich danke dir vielmals
Good look very good sound less performance than akrapovic with no ecu remap
I’m not worried about a .5 hp difference, plus it looks much better than either of the Akro’s
anyone tried this on the 2023 xsr900?
I have a 2023 XSR900 and just ordered one and it arrives Wednesday. Will be putting up a video soon. Based on a Moore Mafia video it does fit. I also texted him and he confirmed when they installed it on a ‘22 it fit with no issues or modifications