It's base on your card and the reader, event the joint is look bad to me. And the question this what's the fking point of he doing this. Bro just remove it ability for nothing
It is a quicker path for electricity to travel with less resistance. That homemade flash drive is going to be, "blazing," fast! It will be the new, "hot," way to make a flash drive!
yea..... but you can just put the micro SD card in and use it as a usb stick. And that way you could also pull it out if you needed..... also that way it would AT LEAST WORK.
Why do you need to remove the the gray plastic piece when you were going to put it back into the green case anyway. Wouldn't soldering overheating the micro sd card ans kill it?
It doesn't have point, dude can't even solder.. But u can easily solder wires to microSD without overheating it. I made two of them, first one after less then week of soldering and a lot of plastic melted, but card is working 4 years know without any issue But normal ppl will solder micro SD > SD adapter, not card itself
@@jovialcupid9687 Didn’t know it was was an easy task to solder without damaging the chip. By the way I believe normal people doesn’t know how to solder.
Same thing as having a pineapple and a knife but this guy would solder the knife in the pineapple and say boom life hack never need a knife to cut a pineapple ever again 😅
you could directly use the reader😅 atleast youll be able to replace the SDCard if it got corrupt,put it in a phone or anything you just removed functionality of both of them 😑
Question... Why??? Those TF cards are Piece of Crap When it comes to reliability... They fail very often.. it's better to buy a proper USB Drive.. or Better an External SSD
@@barbarosaliyilmaz5066 ok hate me, you talking 30 IQ me? i doesnt like english, my have 113 IQ good. world everything peolle hate me, i hate it lot all world, i want leave this world, i hope future sooner.
after properly heat soldering iron...plug it out and then solder on sencitive parts like memory card....because that way no lekege ac volts can come from iron
This is the dumbest thing I ever seen it already was flash memory. So you removed the part where you can swap out SD cards and instead of being able to swap out SD cards you know when you run out of space and you don't want to delete nothing you want to head and soldered it to the contact points this was the dumbest most pointless thing I have ever seen now if you took an SD card and hooked it up to a USB type a port that has a cord on the end that was cut off you know like the end of a charger cord and then made a sort of flash drive out of that that would have made sense but dude that was an SD card adapter already you just made it lose functionality so stupid
Leaked footage of online retailers making $50 8tb drive
🤣😂🤣😂🤣 only the weak buy that stuff.
😂😂😂😂😂
Fr
can they do that really
😂😂
i bet every piece of solder shorting all the pins will make it read & write super fast
Same as a amplifier on sub woofers , called “bridging “not only faster but that SD card gonna bass harder, ☝️😌dude knows his shit..
xD gg@@ayeeffkay
It's base on your card and the reader, event the joint is look bad to me. And the question this what's the fking point of he doing this. Bro just remove it ability for nothing
It is a quicker path for electricity to travel with less resistance. That homemade flash drive is going to be, "blazing," fast! It will be the new, "hot," way to make a flash drive!
@@indridcold8433bro made that flash drive under 1 dollar
lmfao you destroyed an SDcard reader to... read an SD card... genius
That is so true but most people would never pick up on what they're seeing
There was literally a slot for the SD card 😮
Thanks
And that's for illitrates to modify it 😂
Plus, the connections are all bridged, that's a short-circuit guaranteed 😂
@@user-fv4np3cr3k ironically it’s *illiterates*
Bro is like, how to not lose car keys!! Super glue them to your ignition 👍
Thinks for the idea 🧐
😅
yea..... but you can just put the micro SD card in and use it as a usb stick. And that way you could also pull it out if you needed..... also that way it would AT LEAST WORK.
He broke the sd card reader to read the sd card😂
This isn’t a story irs a life hack, he didn’t have a usb drive
@@Hankyuh8if he plugged the sd card in it would still be a usb
@@Hankyuh8 he could have just plugged it in instead of doing that botched soldering job. it would just be a usb drive with expandable storage 😆
Bro giving tips for AliExpress retailers
It had an SD input to begin with😂
This Is Genius!
Making it do exactly the same thing except you can’t take the SD card out, how useful!
Bro fixed a problem he created himself
very true! go “do” this guys!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!1!11!
what happens when dat cheap card reader stops working 🤣😆
Wow xavier
Exactly
Broken flash drive
💀
U fix it
Wow what a genius. You made the SD card reader into a "hey I can only read this one particular drive in future" 😂😂😂
Who else noticed every peace of soldier touching
👇
Bro memory card is waste when you using soldering iron
Bro just get a micro SD card to USB adapter, then you keep the old flash drive as well.
It WAS an SD reader...
Why do you need to remove the the gray plastic piece when you were going to put it back into the green case anyway. Wouldn't soldering overheating the micro sd card ans kill it?
It doesn't have point, dude can't even solder..
But u can easily solder wires to microSD without overheating it. I made two of them, first one after less then week of soldering and a lot of plastic melted, but card is working 4 years know without any issue
But normal ppl will solder micro SD > SD adapter, not card itself
@@jovialcupid9687 Didn’t know it was was an easy task to solder without damaging the chip. By the way I believe normal people doesn’t know how to solder.
Very nice Kamal ki video banae ha
Flash memory comes with EMMC ic not with card😁
This has to be a joke. Like seriously i find it peak comedy
I am confident that there were solder bridges
I think they were just the gloss from hot flux
Yup you're right
all the bridged connections definitely make the card faster
Same thing as having a pineapple and a knife but this guy would solder the knife in the pineapple and say boom life hack never need a knife to cut a pineapple ever again 😅
Isn't that shorted?
Just use an sd card slot and solder it instead of soldering the sd card itself
It already had an SD card slot
Oh i mean why soldering the sd card itself when it already has an sd card slot for it
*Insert Khaby Lame video meme here* 😂
you could directly use the reader😅
atleast youll be able to replace the SDCard if it got corrupt,put it in a phone or anything
you just removed functionality of both of them 😑
Extremely slow but yeah it sure does the work for the moment.
No it doesn't. The solder is shorting itself
Bro really solved a problem he created himself
You can just put an sd card in a card reader whithout soldering,,
Use industrial level sd card relience ones
Ya… because you always want to bridge solder joints like that… 😂
Why not just buying a sd card reader 😂😂😂
The solder pieces are touching
Amazing trick bro
Diwhy
Koi bht hi bara bewafos huga hi jo aesa kryga is lyn k card reader ki life zada nhi huta bht jldi khrb hujata han 😂😂😂
How to ruin a card reader (which could be used for other future memory cards)!🤣
now make a transistor from scratch
an SD card is flash memory already 🤪
Just put some superglue for sd card and put it to reader. Wow u got the usb drive 😂
Multiple solder bridges
I see that the tin is making the wrong contact with the body/is it close together? Is that possible?
Wtf was the point of that? It was a card adapter to begin with
Question... Why???
Those TF cards are Piece of Crap When it comes to reliability... They fail very often.. it's better to buy a proper USB Drive.. or Better an External SSD
yeah right! indoa brain 70 IQ xd
@@Blue_Yaotsna umm you ar wrong they are 30 iq or smthing like that
@@barbarosaliyilmaz5066 ok hate me, you talking 30 IQ me? i doesnt like english, my have 113 IQ good.
world everything peolle hate me, i hate it lot all world, i want leave this world, i hope future sooner.
@@Blue_Yaotsna ok srry
@@barbarosaliyilmaz5066 wait! im sorry you too :(
You could leave it in the port😂
Bro is your thumb okay?
Bro it easy to do and can use as pendrive and format as pendrive / sd card ....
Bro maked a usb drive from a sd card reader💀
'lan jiao' said the taiwanese sdcard manufacturer
memory card tar punga mara jak (Tai NA)😠😠
Ah yes irons touching each other, good for wasting an new sd card reader
Just put it into the slot-
Hold bridged solder
bro first side pront are in last how that work
what in the 5 minute crafts is this!
OK very good ❤❤❤Iran 🇮🇷
Why not just plug the SD card into the card reader?
At what cost bhai ?
Bohat Khub 👍👍👍
الغباء فطره سبحان لحضور كيف خله جميع الاسلاك متلامسه
He shorted all of the joints💀
Why do this
100% use of brain
@@paxant077 india brain 70 IQ 😂
😮👍👌
Isnt that an sd card reader, did you just solder an sd card in an sd card reader
Yeah, cool... BUT WHY????
SD CARD DAMAGE 😂😂
Nice
But u can insert the memory card. Why solder it ? 🤭 I must say youtube get czary while this days😂
Tutorial on how to ruin card readers
*tries to boot from the usb drive* huh I can’t boot a windows installation?
भाई इतना मेहनत किया
क्यों
वैसे भी डायरेक्ट लगता तो भी वही मतलब होता
इसलिए तो कार्ड रीडर बना है
चमचे वाला काम कर गए
Its an adapter why would you ruin it by soldering the thing its made to adapt on to it
To everyone who asked... Soldering does not destroy electronics. How do you think it is made in the factory? They solder everything.
after properly heat soldering iron...plug it out and then solder on sencitive parts like memory card....because that way no lekege ac volts can come from iron
Isse Achha to pendrive hi khareed leta 🤔
Amigo tienes dos adaptadores y decides hacer eso??.😂😂
That was pointless wasn't it?!
Well.... emmm....
well done ✅ (Work hard bro)
where you buy this sd reader i know how to do more memory
How fake drives are made
7 wire 4 inch 3.1 right. :-)
USB of tv laptop mobile ready :-)
💐🌸🌻🌼🌷⚘
._. ¿amigo estas bien? ¿necesitas ayuda?
Wow great invension
Bro bridged the contacts☠️💀☠️💀
I get what you're doing. But why would you want to?
U can't change card reader hehehe
Whyyyy
Lo mismo pero más barato😂
Impossible.
And why people need to do that????
Bro what r those nails💀💀💀💀💀
noice and good luck
ye kam karega ya barbaad ho gaya
w😮
What is flash memory?
🤣🤣🤣🤣🤣
This is the dumbest thing I ever seen it already was flash memory. So you removed the part where you can swap out SD cards and instead of being able to swap out SD cards you know when you run out of space and you don't want to delete nothing you want to head and soldered it to the contact points this was the dumbest most pointless thing I have ever seen now if you took an SD card and hooked it up to a USB type a port that has a cord on the end that was cut off you know like the end of a charger cord and then made a sort of flash drive out of that that would have made sense but dude that was an SD card adapter already you just made it lose functionality so stupid
Hlo bhaji mera memory card crack hoya aw tuci sahi kr dunge
Very nice