Aaron Haliena me too! I just need to replace a front wheel bearing, subframe and diff bushings, clutch, and new intercooler piping. Then i can finally drive it on the track. 😅 PS i saw the footy of you, looking good man!
Sorry for the delay. On an S4 you will likely have to create your own wiring harness or buy an aftermarket harness and wire the lights yourself. You'll also need a switch installed inside to activate them. Meaning running wiring inside the cabin to the switch.
You're absolutely right, I am missing it too! lol In 2018, life gave me a punch in the gut, and all other things were put on hold. Things are getting back on track however and I intend to get back to work this month. I still have a lot to do!
Hi Alex, How are you doing? Is this relay the H270 DC 12V20A N.O IMASEN 8D-01? I could not see the part number on the video. I am preparing to install the Fog lights on my RX-7. I will need to rewire because EU spec RX-7 doesn't have fog wiring. Do you have the schematics for S5 fog lights? Thank you.
I'm doing well thanks for asking. If you are starting from scratch and doing your own wiring you can install any 4 pin relay. I only used an old Mazda relay, the H270, so I can directly connect it to the OEM harness and clip. Since you don't have that, you can select any 4 pin relay. In all honesty, you can probably just buy a universal fog light wiring kit, it should come with the relay, switch and everything you need. The only thing you may have to do is find a way to connect the fog light to the new harness (aka splice the OEM fog light wires into the universal harness) and tap into a 12V ignition source. You can see that universal wiring diagram I posted in the video or the OEM service manuals are available for download online. Good luck and let me know if you have any other questions!
@@AlexFranceschithanks Alex I will get back to you soon. Let me digest your information. I brought last year a 5 pin Mazda relay from Ebay. I went back to you UA-cam video and Mazda manual and saw the 4 pin relay. Now I am looking for a 4 pin relay. A friend is helping with this. I uploaded a video.
I have an S5 conv. last owner sold me car with the fog lights and their brackets, but not the harness. Is there anywhere I can pick those up without buying a whole new set of headlamps?
Eric Wolfe, I don't have the stock brake ducts. Those have been long gone for many many years. So, there is no concern about blocking airflow to the brakes. The aero, however, I do not know how much impact it may have. But, you know, someone will always say something on the internet lol.
I don't think it has any real effect on aero frankly. I remember somewhere someone posted that their top speed with headlights up was only 3 mph less than with the headlights down, and the headlights are much larger than the fog lights and in a worse place for aero (in my opinion). It probably has no effect.
Hi Alex I'm having Problem with my fc3s every time I put my foot down it stars bubbling when driving unplugged the amf connection then plugged it back in it start working for couple of miles then again can you make a vid on that please
I would, but I typically make these videos when I actually need to do it on my own car. So, it may not be for awhile. If you need help send me a message on IG. Thanks!
I actually get this a lot. Brazilian, Persian, Armenian, Italian, Greek or all types of Latino lol. I love Brasil, but I'm half Puerto Rican and half...white basically lol.
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
Your content is absolutely amazing and helpful. Dear god please never stop making rx7 fc tutorials. Respect and applause !
Thank you! I will do my best!
Dope I have an S4, and I also have some fog lights 😊
Alvin Ameyaw nice, so you can vouch for the fact this is an easy install to do lol.
Great video and instructions!!
The wiring is also not available on the EU spec. FC. So I will have to do the wiring myself. This video helped alot. Thnx.
If I need to simply replace a fog light bulb, do I need to remove the whole fog light assembly on that side of the car?
Thanks man, this is real helpful!
Vic Kanis no problem, goodluck!
Want to see you drifting the FC!!
Aaron Haliena me too! I just need to replace a front wheel bearing, subframe and diff bushings, clutch, and new intercooler piping. Then i can finally drive it on the track. 😅
PS i saw the footy of you, looking good man!
I have an s4 what do I need to do what do I need to buy
@AlexFranceschi
@Alex Franceschi
Sorry for the delay. On an S4 you will likely have to create your own wiring harness or buy an aftermarket harness and wire the lights yourself. You'll also need a switch installed inside to activate them. Meaning running wiring inside the cabin to the switch.
Super helpful thank you 🙏
Bro been missing this build.when is there going to be a Dyno session
You're absolutely right, I am missing it too! lol In 2018, life gave me a punch in the gut, and all other things were put on hold. Things are getting back on track however and I intend to get back to work this month. I still have a lot to do!
Hi Alex, How are you doing?
Is this relay the H270 DC 12V20A N.O IMASEN 8D-01?
I could not see the part number on the video. I am preparing to install the Fog lights on my RX-7. I will need to rewire because EU spec RX-7 doesn't have fog wiring. Do you have the schematics for S5 fog lights? Thank you.
I'm doing well thanks for asking. If you are starting from scratch and doing your own wiring you can install any 4 pin relay. I only used an old Mazda relay, the H270, so I can directly connect it to the OEM harness and clip. Since you don't have that, you can select any 4 pin relay. In all honesty, you can probably just buy a universal fog light wiring kit, it should come with the relay, switch and everything you need. The only thing you may have to do is find a way to connect the fog light to the new harness (aka splice the OEM fog light wires into the universal harness) and tap into a 12V ignition source. You can see that universal wiring diagram I posted in the video or the OEM service manuals are available for download online. Good luck and let me know if you have any other questions!
@@AlexFranceschithanks Alex I will get back to you soon. Let me digest your information. I brought last year a 5 pin Mazda relay from Ebay. I went back to you UA-cam video and Mazda manual and saw the 4 pin relay. Now I am looking for a 4 pin relay. A friend is helping with this. I uploaded a video.
I have an S5 conv. last owner sold me car with the fog lights and their brackets, but not the harness. Is there anywhere I can pick those up without buying a whole new set of headlamps?
What is the model number of the H270 relay?
Ok what do you think this is restricting airflow through that channel the of the cooling the brakes or negative air pressure causing down force
Eric Wolfe, I don't have the stock brake ducts. Those have been long gone for many many years. So, there is no concern about blocking airflow to the brakes. The aero, however, I do not know how much impact it may have. But, you know, someone will always say something on the internet lol.
I don't think it has any real effect on aero frankly. I remember somewhere someone posted that their top speed with headlights up was only 3 mph less than with the headlights down, and the headlights are much larger than the fog lights and in a worse place for aero (in my opinion). It probably has no effect.
Chris Barbati yeah, and truth be told, I'm not focus on the aerodynamics of this car, it will mostly be setup for mechanical grip anyways.
Hell yeah.
Hi Alex I'm having
Problem with my fc3s every time I put my foot down it stars bubbling when driving unplugged the amf connection then plugged it back in it start working for couple of miles then again can you make a vid on that please
Hi, I'm not sure what you mean by "bubbling"? What is the condition of the wires to the AFM?
Can you do a video about replacing injectors on the rx7 fc? There's no video in existence!
I would, but I typically make these videos when I actually need to do it on my own car. So, it may not be for awhile. If you need help send me a message on IG. Thanks!
Unbolt the rail, unplug the injector, installation is reversed...
Taaaaakuuuumi
Are you from Brazil?
I actually get this a lot. Brazilian, Persian, Armenian, Italian, Greek or all types of Latino lol. I love Brasil, but I'm half Puerto Rican and half...white basically lol.
@@AlexFranceschi cool lol. I'm Brazilian. You got a lil of bit of Brazilian accent
@@arlokkkk Nice! Maybe I should practice some Português! lol ✌🏽
You can just put a jumper in that plug, saves money and are you ever really going to want your badass fog lights to not be on?