Great tutorial! Thank you so much! To prevent the metal from warping you can use the disc cutter and stamping tools before you saw out the metal and flatten the piece again if you have to. Thank you for a wonderful tutorial!❤
A quick little tip that MAY be a little less accurate if one does not have calipers or is just lazy, is to take a string and set it behind the stone when you go to trace it and mark the string right where the edge of the stone is, then fold it up and over the stone and mark right at the length you need the prong to be then use that as your prong size. Even paper will work
You are terrific and a joy to watch and learn from. May I ask you a question? What size letter stamps do you use. I want to purchase, but have never used them before, so I am out to lunch on that one. Thank you.
Hi Carol. That stamp is 11.5mm x 3.5mm. Here is a link www.beaducation.com/p/5152-metal-stamping-tools-symmetrical-branch-border-metal-design-stamp-beaducation-original?product_category=98-metal-stamping-tools-metal-design-stamps. Thanks! If you haven't already, subscribe to to learn more :)
Without a doubt, your tutorials are really top-notch. Thank you for what you do.
Thank you for your feedback. Very appreciated. We're glad you are enjoying them!
Very pretty…simple and elegant!
Glad you like it! Give it a try! Have fun :)
Great tutorial! Thank you so much!
To prevent the metal from warping you can use the disc cutter and stamping tools before you saw out the metal and flatten the piece again if you have to. Thank you for a wonderful tutorial!❤
Great tip! Thanks!
A quick little tip that MAY be a little less accurate if one does not have calipers or is just lazy, is to take a string and set it behind the stone when you go to trace it and mark the string right where the edge of the stone is, then fold it up and over the stone and mark right at the length you need the prong to be then use that as your prong size. Even paper will work
This was such a helpful video! Just the help I needed to make my brooch!
Great now I can make use of all these resin cabochons I’ve made ~ Thank You so much and I really appreciated this!!
Thank you for you helping me & praise the Lord! you do a great job sister!
💝 tip with the packing tape on sharpie pen!
Absolutely beautiful. I find I keep gravitating to bead weaving, but love wirework as well.
Am definitely going to give this a try. Thank you so much.
GO FOR IT! Have fun :)
tap the black dot with a pointy tool and then the punch will sit in that divot and then the screw down can poke the hole.
great tip! thank you!!
I liked the tutorial, thank you! I only would to know what kind of metal is best for this technique: dead soft/half hard/hard metal sheet.
Nice job I like the measuring technique
Thank You for this great tutorial and the pendant is Gorgeous!
+Sylvie Dufour Thanks Sylvie! :)
Just what I have been looking for...Thanks!
Great! Glad we could help!
Great job ❤
Thank you! Cheers!
Very pretty. Thank you for the tutorial and inspiration.
+Patricia DelMercado Absolutely!
Great video, nice piece!
I was taught to hit the die one or two strong hits, not several because multiple hit can move the metal in the cutter
For a details list of tools and materials used in this class, check out the class page on the site.
www.beaducation.com/online_classes/190
Love this!! Thanks so much for the tutorial!
thanks for watching and commenting!!
Lindo y minucioso trabajo. trabajo
Gracias!
You are terrific and a joy to watch and learn from. May I ask you a question? What size letter stamps do you use. I want to purchase, but have never used them before, so I am out to lunch on that one. Thank you.
You are welcome. Thanks for the feedback! :) The most popular letters are 3/32" or 1/8th". They are pretty close in size. Hope this helps.
Another fine video!!!
Thanks for watching
Gracias
Wonderful thank you so much for your informative video 🙏🏽
What gauge metal is best for this type of work? Thanks
for this design, we recommend 22 or 24 gauge
Thanx for you tutorial, about tools for make this piece.
Well done!
Coolness beautiful piece
Thanks for the video.
You are very welcome :)
How big is the stamp you used? Thanks
Hi Carol. That stamp is 11.5mm x 3.5mm. Here is a link www.beaducation.com/p/5152-metal-stamping-tools-symmetrical-branch-border-metal-design-stamp-beaducation-original?product_category=98-metal-stamping-tools-metal-design-stamps. Thanks! If you haven't already, subscribe to to learn more :)
thank you for answering my question it really helps
Where did you buy the stamping leaves tool .
On beaducation.com :) www.beaducation.com/pc/98-metal-stamping-tools-metal-design-stamps?utf8=✓&qry=&choices%5B90%5D=on&sort_order=Newest
Love it
Thank you.
How thick is copper ?
This is 22 gauge sheet. To see a full materials list, check out the link below:)
www.beaducation.com/online_classes/190-tab-set-pendants
wish you had said what grit is medium or fine
For a complete tools and materials list, check out this page
www.beaducation.com/online_classes/190
Like this is pretty thanks
💯👍
😎💝👍🏽