#83 | ASRock B650 AM5 CPU Socket Replacement

Поділитися
Вставка
  • Опубліковано 15 січ 2025
  • Feel free to shoot me an email if you have questions or need a repair.
    blackhorserepairs@gmail.com
    You can find me on Discord
    / discord
    If you would like to order a repair you can do so on eBay
    (Not listed yet, this listing is for IC608 resoldering)
    www.ebay.com/i...
    blackhorserepa...

КОМЕНТАРІ • 11

  • @mm0077
    @mm0077 Місяць тому

    Thank you for sharing and Thank you to the person who advised you of this too, as I read comments. This is well known in the BGA community that the bottom glass of this machine strongly advisable to be removed and in comparison to the jovy system e.g re-8500, which do not need removal of glasses.

  • @alexgreis
    @alexgreis Місяць тому

    Good job! Thank you.

  • @stoptheirlies
    @stoptheirlies Місяць тому +1

    Hi Raff, did you see that damaged cap on Vcore Phases? Bob

    • @blackhorserepairs
      @blackhorserepairs  Місяць тому +1

      good eye Bob, yes I did see that :)

    • @stoptheirlies
      @stoptheirlies Місяць тому

      @@blackhorserepairs 😁 Also just for information see this. "The melting point of lead-free solder is approximately 217 °C. But you cannot solder at this temperature! The soldering temperature should be approximately 100 ° C above the melting point. That means a total temperature of 317 °C."

    • @blackhorserepairs
      @blackhorserepairs  Місяць тому

      @@stoptheirlies Interesting, on my hot air gun I use 380C for lead-free solder. The max temp I can set on the IR station is 260 but at 235 the socket drops pretty well. It also works well for desoldering and the original solder from the factory should be lead-free right?

    • @stoptheirlies
      @stoptheirlies Місяць тому

      Well done Raff, looks like it's all coming together. Bob

  • @afk_jacob2433
    @afk_jacob2433 Місяць тому

    GREAT! Do you think its remotly possible to replace a LGA 1851 cpu socket?

  • @formhubfar
    @formhubfar Місяць тому

    Is this a board review or a socket repair? 🙄

    • @blackhorserepairs
      @blackhorserepairs  Місяць тому

      A little bit of both, I find it interesting to examine the board not to mention useful 😉