Not having a Mini 4 pro I can relaxe..... Both the Mini 3 pro and Mavic 3 pro happily fly having who knows what version of software. Thanks for keeping a sharp eye on DJI!
As always very good work Nobbygreen. You see, I am having a problem with the last two updates, I thought this last one would fix it but it has not. The problem is that I can't perform Hyperlapses. When I hit the record and start button, it stalls it does a loop back on the red sphere of the picture and then the picture crashes, goes black and white and goes back to video mode. This is always the case. It is a real despair all this. Anyway, I hope you can help me, although I think it will have to be dji who finally does it. Best regards and thanks in advance.
Sorry to hear you are suffering with the problems you are having. Ive not heard of any other with this issue, one thing you could try is to refresh the update. Failing that, you should contact DJI and get their opinion. They are very good with their after sales service. You could just have a fault with your Mini 4 Pro. hope this helps? Thanks 🙏
Its still a bit hit and miss at the moment. Mainly overcast as late, but we did have a good weekend last weekend. Need to get April out of the way i reckon haha Thanks
Before this update suddenly one of my mini 4 pro motors was stopped without any reason and crashed..! My drone now at local workshop for checking and solving the problem. I hope this new update is for the problem that’s I got.
hi nobby do you know if you could make a waypoint mission with two way points on top of each other say one at 100 foot and the other one at 400 foot in the same position before planning to go to another one?
Not between two points. You would have to add another point at each end to tell it to climb to 400 on point 3 then back to the 4th which would be a couple of feet beyond the starting point. If that makes sense 👍
@@JustinWillerton There will be another firmwre for the RC2 in due course, which hopefully will fix things. The P mode is nothing to worry about, that sometimes happens after new releases.
@@nobby-green Thanks for the reply. Just noticing lots of people on other channels complaining about the very slow start up time of the RC2 . I noticed the problem since the update in line with Avatar 2 release. I'm not the only one, so I can relax
@@JustinWillerton I think that P mode thing is a typo in the software, cause I've never heard of P mode. But I only got mine this week and haven't read the manual yet.
"Fixed some issues" is like saying we don't know what we fixed but they are fixed. If they needed to type it out, they need to tell us what they fixed. Mine seems to be perfect for now, but seriously. I learned long ago not to update firmware unless there's a problem fixed, but how are we supposed to know what's fixed?
You and thousands of others have no problems however there are some that have issues that report to DJI. I have folks report to me that this and that don’t work properly and it’s those that are getting a fix 👍 thanks 🙏
I haven't updated past the 1.12.8 fly app and whatever aircraft firmware is older... lol I'm gonna wait till the 1.13.1 finally comes out or if they release a new one altogether then I'll just update it all at once... Yes, I'm a slacker... lol
This video did not cover the actual changes. It is a tutorial on how to update. People who don't manage without this video should not operate a drone. Don't waste people's time please.
You obviously missed the fact that several times during the video I stated there were no changes. You can’t show changes that are not there. That said some pilots have been having issues with their mini 4 pro. This aircraft firmware could potentially fix the issues that they have been having 🤷♂️ not everyone’s drone flys perfectly without issues. Again this was mentioned a few times in the video 🤷♂️
@@nobby-green Well, you could argue for the need for this video. I do too. I have heard that updating should make everything slower and that is why I watched this video, guess I’ll see now I’m updating it.
Hey Nobby. File transfer for me Seems rather broken. Having a nightmare getting footage from the drone today to transfer to my phone. Not even attempted to get screen recordings from rc2 to phone yet. Somehow, things seemed a lot simpler on my mini 2 se :/. Got a weird warning re transfer that it's experiencing high levels of interference. Washing machine is on in the house but moved drone to another part of the house. Switched off drone and RC now. Will try again in a bit. To get screen recordings from rc2 (have SD card in RC). Is it best to take out RC card and put in drone and try file transfer from that?. Cheers bud
@@nobby-green I don't have a reader. Thought I could get around that by putting in drone. It's done my nut in. Giving up for now. It's a fag paper away from being booted out in the garden with my foot!. I can see today's vids on RC, I can (after faffing about in files on RC) see my screen records on RC but getting either of them onto phone (which was child's play on 2 se) seems impossible:/
@@nobby-green last flight it was in p mode and I wanted to zoom with the wheel, and a popup said „not in this flightmode“ (mini4 with rc2). I’ve not tested it in any other mode was a short flight for a sphere
@@DavidinEssexUKRight, but laserlock is referring to P mode, not pano photos which don’t support zoom due to it being digital zoom on the mini drones.👍
A question for a lot of drone pilot who fly in EASA countries is, if the green rear lights are blinking while the camera is recording. The rules ask for a constant blinking. Otherwise night flights are not allowed. Another thing to may mention: Third party batteries Plus are not anymore working after the newest update. The original DJI battery Plus is fine.
Thanks for the update Nobby. DJI squashing them known bugs and preventing others from even seeing them. Have a great day Nobby.
Cheers Bob. And you’re welcome ☺️ 👍
Not having a Mini 4 pro I can relaxe.....
Both the Mini 3 pro and Mavic 3 pro happily fly having who knows what version of software.
Thanks for keeping a sharp eye on DJI!
They will sort them out soon 👍 thanks 🙏
Thanks for the update Nobby - I'll check mine out. Good advice
Good idea 👍
As always very good work Nobbygreen. You see, I am having a problem with the last two updates, I thought this last one would fix it but it has not. The problem is that I can't perform Hyperlapses. When I hit the record and start button, it stalls it does a loop back on the red sphere of the picture and then the picture crashes, goes black and white and goes back to video mode. This is always the case. It is a real despair all this. Anyway, I hope you can help me, although I think it will have to be dji who finally does it. Best regards and thanks in advance.
Sorry to hear you are suffering with the problems you are having. Ive not heard of any other with this issue, one thing you could try is to refresh the update. Failing that, you should contact DJI and get their opinion. They are very good with their after sales service. You could just have a fault with your Mini 4 Pro. hope this helps? Thanks 🙏
Nice one mate how's the weather been your end? been ok up here for a change lol
Its still a bit hit and miss at the moment. Mainly overcast as late, but we did have a good weekend last weekend. Need to get April out of the way i reckon haha Thanks
With V01.00.0500 firmware does the 120m altitude limit apply in the UK or can you set it to 500m.
Yes you get the 500m limit in the uk 👍
Thanks for the heads up, Ive just this second updated mine
Great stuff 👍 and you’re welcome
Thanks for the information
Cheers Terry 👍
Before this update suddenly one of my mini 4 pro motors was stopped without any reason and crashed..!
My drone now at local workshop for checking and solving the problem.
I hope this new update is for the problem that’s I got.
Sounds like a faulty motor. That should be covered under warranty 👍 hope you get sorted 🙏
Thanks Nobby!
You’re welcome ☺️ thanks 🙏
How to use my non brand DJI Plus battery in my Mini 4 Pro?
I’m not sure you can tbh. But cannot be sure as I don’t have any. I’m sure someone on here will confirm 👍
@@nobby-green I see, thanks anyway
hi nobby do you know if you could make a waypoint mission with two way points on top of each other say one at 100 foot and the other one at 400 foot in the same position before planning to go to another one?
Not between two points. You would have to add another point at each end to tell it to climb to 400 on point 3 then back to the 4th which would be a couple of feet beyond the starting point. If that makes sense 👍
@@nobby-green thanks
This update is being pushed on my mini 2 SE - 30mb to allow remote ID, I won't bother until it becomes mandatory.
I have noticed the RC2 takes longer now to power up the screen live to camera
Interesting 🤨 mine seems just fine 🤷♂️ thanks 🙏
Same here. I'm on the air 3 and my RC2 is very slow to start up as well. And the P mode is still showing instead of N mode
@@JustinWillerton There will be another firmwre for the RC2 in due course, which hopefully will fix things. The P mode is nothing to worry about, that sometimes happens after new releases.
@@nobby-green Thanks for the reply. Just noticing lots of people on other channels complaining about the very slow start up time of the RC2 . I noticed the problem since the update in line with Avatar 2 release.
I'm not the only one, so I can relax
@@JustinWillerton I think that P mode thing is a typo in the software, cause I've never heard of P mode. But I only got mine this week and haven't read the manual yet.
Downloaded the firmware update. Tested it. Didn't fix my issue of the gimbal pointing down on the way back from a quickshot (dronie)
There will be another one soon with the latest fly app 👍
Forgot to ask. When doing file transfers from RC/drone to phone, should I turn offy phones mobile data? Or is this irrelevant ?
I don’t and have no problems at all 👍
@@nobby-green I'm an idiot, turns out it was because I had my VPN switched on!
@@markkempster7367 at least you found the answer ☺️👍
Do you know how to fix Vision sensor error sir, for mini 4 pro? Thank's in Advance
What’s the error?
"Fixed some issues" is like saying we don't know what we fixed but they are fixed. If they needed to type it out, they need to tell us what they fixed. Mine seems to be perfect for now, but seriously. I learned long ago not to update firmware unless there's a problem fixed, but how are we supposed to know what's fixed?
You and thousands of others have no problems however there are some that have issues that report to DJI. I have folks report to me that this and that don’t work properly and it’s those that are getting a fix 👍 thanks 🙏
I haven't updated past the 1.12.8 fly app and whatever aircraft firmware is older... lol I'm gonna wait till the 1.13.1 finally comes out or if they release a new one altogether then I'll just update it all at once... Yes, I'm a slacker... lol
You’re not a slacker Kevin just a little slow haha. Could be a good shout to wait for the 1.13.1 could be a while I guess 👍
This video did not cover the actual changes. It is a tutorial on how to update. People who don't manage without this video should not operate a drone. Don't waste people's time please.
You obviously missed the fact that several times during the video I stated there were no changes. You can’t show changes that are not there. That said some pilots have been having issues with their mini 4 pro. This aircraft firmware could potentially fix the issues that they have been having 🤷♂️ not everyone’s drone flys perfectly without issues. Again this was mentioned a few times in the video 🤷♂️
@@nobby-green Well, you could argue for the need for this video. I do too.
I have heard that updating should make everything slower and that is why I watched this video, guess I’ll see now I’m updating it.
@@henrikcarlsen1881 nothing slow my end 👍
@@nobby-green - you were lucky, it broke 3 batteries, crashed the app a bunch of times and is slower..... big fail on the release of such code.
@@ChadSteele_Video seems it proper broke yours 🤷♂️ check your other comments 👍
Hey Nobby. File transfer for me Seems rather broken. Having a nightmare getting footage from the drone today to transfer to my phone. Not even attempted to get screen recordings from rc2 to phone yet. Somehow, things seemed a lot simpler on my mini 2 se :/. Got a weird warning re transfer that it's experiencing high levels of interference. Washing machine is on in the house but moved drone to another part of the house. Switched off drone and RC now. Will try again in a bit. To get screen recordings from rc2 (have SD card in RC). Is it best to take out RC card and put in drone and try file transfer from that?. Cheers bud
No don’t put the sd card in the drone. Just pop in pc or reader 👍 not sure why you having problems with the file transfer?
@@nobby-green I don't have a reader. Thought I could get around that by putting in drone. It's done my nut in. Giving up for now. It's a fag paper away from being booted out in the garden with my foot!. I can see today's vids on RC, I can (after faffing about in files on RC) see my screen records on RC but getting either of them onto phone (which was child's play on 2 se) seems impossible:/
so no fix for p-mode and not be able to zoom :/ sad. waiting, thx for your video
The fix for P mode will come in the fly app update or firmware that is only cosmetic and doesn’t affect the flight 👍 which zoom are you referring to?
@@nobby-green last flight it was in p mode and I wanted to zoom with the wheel, and a popup said „not in this flightmode“ (mini4 with rc2). I’ve not tested it in any other mode was a short flight for a sphere
@@LaserlockNo problem with zoom in P mode here. I didn’t test this prior to latest firmware update though. Try it after updating the firmware.👍
@@Laserlockyou cant zoom in the pano modes.
@@DavidinEssexUKRight, but laserlock is referring to P mode, not pano photos which don’t support zoom due to it being digital zoom on the mini drones.👍
A question for a lot of drone pilot who fly in EASA countries is, if the green rear lights are blinking while the camera is recording. The rules ask for a constant blinking. Otherwise night flights are not allowed.
Another thing to may mention: Third party batteries Plus are not anymore working after the newest update. The original DJI battery Plus is fine.
They still go out when recording 👍 I had heard about the batteries. Thanks 🙏
@@nobby-green The strange thing is, if someone applies for a C1, the Mini 4 Pro changes the blinking lights.
@@allegriach that will be handy for our EU users 👍 can’t see why they don’t keep them on all the time as they are on the back anyway 🤷♂️ thanks 🙏
"The original DJI battery Plus is fine."..... big deal!!
DJI Assistant thinks I own something called "Inspire" so I am doing an RMA and will let them update the drone.
How bizarre 🤷♂️
It causes way more problems than it solves, its a zero firmware..... give it a miss if you don't want problems.
No problems here 🤷♂️