Case looks well with the loader, set of front fenders would finish her off nicely. I know you’re happy with the speed of the loader but it should be faster than it is, somethings not right somewhere but if you’re happy with that’s all that matters 👍
I wish I still had my father around to give me a hand out. I often gave out because he would insist on doing it his way but we got on great and he was always full of crack and messing, he was an enormous help go for ing and the bit of advice and encouragement, treasure the time it doesn't last forever.
Tidy job. Loader will make your life so much easier. It will save your back and no end of time. Nice full pit of silage to get her to work this winter👍
Very nice. You'll ask your self why didnt we do this years ago. So handy rondcthe yard. You can just build the attachments up over the years. You'll find it's the brackets that cost the most. Farm sales are always a good buy for attachments. Small muck grab pallet forks not sure if you do round bales but a single spike works well. Top job and looks very tide workmanship now its fitted. Keep the videos rolling.
Lovely looking job Adrian. The rear weight is a must. Your sorted now for winter feeding when it starts. The 6ft bucket is a good job. We bought a 4ft when we put the new Rossmore on the Ford a few years ago and its too small.
Good video quicke are good loader's I have one done plenty of work pins wears have to replace quicke do s good strong bale handler I have one and would recommend them might be more expensive than other makes but worth it
Aye the farmer busy time ,I know a old buck beside me ,tied up the yew while he was clipping her ,so he could stop for a smoke of the pipe ,he had lot of yews ,he 100 years old in ages months,stress free lol 👍👍👍
I bought a prodig bale handler this year. I would recommend one. They are really well made and the strength in the steel is very impressive. I would say they are the best on the market at the minute.
I bought a 1989 685,with 4wd and the xl cab but no front loader,found a complete loader with brackets to just bolt on. did the same as u,cab slightly up,out with one tank and also tap the holes for rust.
Great video as always I would strongly recommend the prodig bail squeeze the barrels over the spikes r bigger and stronger dan any of the rest a Super Super machine
I was the same to putting a light bar on my my jeep got the number plate mount and all and when all the work was done it looked fantastic and was prod of it
Hi Adrian, Well done with the fitting of the loader. She's looking well now. I'd say you won't know yourself with all the work you will do with it around the farm. It's really going to up the value of the case around the yard. Fergie will be getting jealous come next winter 😂. Best of luck with it. Great video.👏
Mchale bale handlers are brilliant. If you were to get a bale spike or something similar I recommend you to get a grab as you can stab into bales and also muck out you barns with them etc
Really enjoying your videos, only recently subscribed. We have mchale bale handler. It's ok. Quickee can open n close more due to position of ram. Doesn't have solid back so better view. We now use TR4 (tr3) for tractor loader. Great handler and easier to use in my opinion. Less chance of tearing bales and can grab bale from any side.With the way you mind your gear it's a life time investment.
Whatever you do when you’re buying a bale handler is the plate on the other side of the brackets. Prodig and Fleming do a bale handler with no plate which gives you great vision of the bale.
Bale handler would be handy for stacking bales etc but would be hard on the tractor, we have a McHale bale handler for the past 20 years and has been bulletproof, can also take off the pipes and just use the spikes so can use them for 4x4 bales of straw etc. Loader is a great bit of kit but just need to keep an eye on front bushings etc as they will need to be replaced a lot more.
Great video, please go for a Fleming bale mover, way more visible and design is way better compared to the others, we have had others and we find the Fleming way ahead of the other ,
A lot of people make the mistake with kill switches. They should be on the earth cable not the positive. Mchale bale handler great machine. Have thousands of bales stacked with my one and not a bother to them. Have a tr-4 (elephant trunk bale stacker)for the jcb which are even better again but as u siad u want it for more than stacking bales. So would not be suitable for you. Loader looks well on tractor. U will get used to it don’t think u need to put a camera on it Adrian.
Give a look at the quickie flexibal bale handlers .iv two of them here at bales on hire drawing up to 10k bales a year a great handler first one since 08 and never cracked or needed weld .when your wiring that joystick switch it on the earth instead of the positive it stops the buttons burning out on the joystick.u might need to turn up the relief valve for the hydraulics if its not lifting enough weight u can put a gauge on the hyraulics to check the psi output of the pump first
Fleming bale handlers are best, prodig are a very strong handler, mchale aren't too bad either, will you get soft ride for her? Makes a huge difference. To speed up the hydraulics I think you can get a higher geared pump for a 4200 series (same backend) I know you said you were happy with the speed of it but an extra bit of flow is no harm. Great video adrian 👍
Hav a look at tanco bale handlers. Worked with them a peedie bit and there as heavily built as mchale I would say. But you’ll not want to get sumthin to heavy for liftin as you’ll just plumit the size of bales you can lift if you buy sumthin to heavily built
I'm looking to buy abit of land in the near future. And your my man for advice of how to go about it and what to look for. I will b in touch with ya in the near future..
Quickey flexibal with big tube a great bale handler . I think a loader on the Massey would have been a better tractor with power shuttle a must for loader work only my opinion .best of luck 👍
Sean Collins want to keep the Massey free for hedge cutting, big to big and awkward around the yard as well, if the case can’t handle the work we’ll upgrade it for a bigger machine with a loader fitted
I'd recommend that you put a soft ride on the loader. It makes for safer operation and less stress on the machine and the man due to loader bouncing going over rough roads and fields. Cost around €200 / €250. Well worth it.
Great videos. Fair play. Fleming handler is the way to go. Have had one for 10+ years. Extra bar on top so bale can’t fall back onto bonnet. Don’t think the other males have that. Are you going to put the bale splitter on the loader?
Drew bales for hire for a good few years prodig bale handler all the way. Every other model are too weak steel not in them. 👌Tidy tractor now credit to ya.
get longer bolts to screw up into the 2 half shafts ......where the stablisers go ............ trust me ...........also make a simple plate to go underneath at the bell housing to tie the 2 brackets together ........again trust me on this one ........
You deserve more credit your one of the best you tube chanells I've ever seen keep up the work!
agree up there with tom pemberton and George saunders
Jamie Whelan cheers lads
So true
Agree, love the content and attention to detail put into the videos. Some achievement whilst running a dairy farm!
I realize Im quite randomly asking but does anybody know of a good site to watch new movies online?
Case looks well with the loader, set of front fenders would finish her off nicely. I know you’re happy with the speed of the loader but it should be faster than it is, somethings not right somewhere but if you’re happy with that’s all that matters 👍
I wish I still had my father around to give me a hand out. I often gave out because he would insist on doing it his way but we got on great and he was always full of crack and messing, he was an enormous help go for ing and the bit of advice and encouragement, treasure the time it doesn't last forever.
Hello from Yorkton, Saskatchewan, Canada. Thanks for sharing your great video’s please keep them coming.
She looks a right good job Adrian, I'd say you won't know yourself come winter time this year, a loader pays for itself 100x over!!
Good luck with the loader, you won’t know yourself with it around the place, such a handy piece of equipment
Quicke a super job! Very handy for all jobs around the yard
Great sound of that engine, loader is a tidy job, very handy
Tidy job. Loader will make your life so much easier. It will save your back and no end of time. Nice full pit of silage to get her to work this winter👍
Very nice. You'll ask your self why didnt we do this years ago. So handy rondcthe yard. You can just build the attachments up over the years. You'll find it's the brackets that cost the most. Farm sales are always a good buy for attachments. Small muck grab pallet forks not sure if you do round bales but a single spike works well. Top job and looks very tide workmanship now its fitted. Keep the videos rolling.
Agree totally. We borrowed neighbours loaders for years and finally bought a NH 6635 with a Quicke 415 loader, best thing we ever bought
Give prodig a look savagely well made
Lovely looking job Adrian. The rear weight is a must. Your sorted now for winter feeding when it starts. The 6ft bucket is a good job. We bought a 4ft when we put the new Rossmore on the Ford a few years ago and its too small.
Fleming bale handler is excellent no swaying when you have the rollers closed.
Great job, love this wee tractor, loader makes it look even better!
Great video Adrian, I recon the case and loader will be worth their weight and save you a load of time, effort and neck ache. 👍🙂😄
Good video quicke are good loader's I have one done plenty of work pins wears have to replace quicke do s good strong bale handler I have one and would recommend them might be more expensive than other makes but worth it
Great video! Glad to hear there are more coming!
Aye the farmer busy time ,I know a old buck beside me ,tied up the yew while he was clipping her ,so he could stop for a smoke of the pipe ,he had lot of yews ,he 100 years old in ages months,stress free lol 👍👍👍
we have an alo "flexibal" one same make as the loader. Very solid/strong spike. also comes with rollers for lifting wrapped bales.
I bought a prodig bale handler this year. I would recommend one. They are really well made and the strength in the steel is very impressive. I would say they are the best on the market at the minute.
I bought a 1989 685,with 4wd and the xl cab but no front loader,found a complete loader with brackets to just bolt on. did the same as u,cab slightly up,out with one tank and also tap the holes for rust.
Nice case and loader Keep up the good work👍👍
Great video as always I would strongly recommend the prodig bail squeeze the barrels over the spikes r bigger and stronger dan any of the rest a Super Super machine
The case looks good. Thanks for sharing
Case is looking just tidy with the loader on now Adrian done a cracking job of it!Next you’ll be getting yourself a telehandler 😉👍🏼
I just bought a johnston bale stacker. Heavy duty and very good
I was the same to putting a light bar on my my jeep got the number plate mount and all and when all the work was done it looked fantastic and was prod of it
Hi Adrian,
Well done with the fitting of the loader. She's looking well now. I'd say you won't know yourself with all the work you will do with it around the farm. It's really going to up the value of the case around the yard. Fergie will be getting jealous come next winter 😂. Best of luck with it. Great video.👏
Thomas Loughlin cheers lad 👍
Turned it into a good looking piece of kit👍
Mchale bale handlers are brilliant. If you were to get a bale spike or something similar I recommend you to get a grab as you can stab into bales and also muck out you barns with them etc
The McHale bale handler will lift pallets with the spikes so you don't need a separate pallet fork. Really useful attachment.
Mchale bale handler is great we’ve had it for years so handy you can take off the round bars and use the spikes for hay etc
Great video as always the tractor looks great with the loader on it Adrain
Our mchale bale handler is used for everything like logs, palets,fert bags and bales sometimes machinery
Nice job keep a eye out loader brackets for the massey u could swap loader between tractors then
Best of luck with her. Its nice & compact even with loader on.
Really enjoying your videos, only recently subscribed. We have mchale bale handler. It's ok. Quickee can open n close more due to position of ram. Doesn't have solid back so better view. We now use TR4 (tr3) for tractor loader. Great handler and easier to use in my opinion. Less chance of tearing bales and can grab bale from any side.With the way you mind your gear it's a life time investment.
Twose is a good bale handler. My uncle’s was on his John Deere loader and it handled a lot of bales over the years. Good and reliable. 😄
The Prodig Bale handler is brilliant.
Great job Adrian...video idea..taking off and putting on implements with loader euro brackets, would be very popular.
Also my dad last year baught a tr3 great yoke but I’d say quite heavy on the case but it’s only a bale handler
tidy job adrian it looks well with loader
Whatever you do when you’re buying a bale handler is the plate on the other side of the brackets. Prodig and Fleming do a bale handler with no plate which gives you great vision of the bale.
It looks the business very good work
Bale handler would be handy for stacking bales etc but would be hard on the tractor, we have a McHale bale handler for the past 20 years and has been bulletproof, can also take off the pipes and just use the spikes so can use them for 4x4 bales of straw etc. Loader is a great bit of kit but just need to keep an eye on front bushings etc as they will need to be replaced a lot more.
Loader looks well, good job!
Great video, please go for a Fleming bale mover, way more visible and design is way better compared to the others, we have had others and we find the Fleming way ahead of the other ,
I would recommend a Fleming bale squeeze. They make one where you can take the caps off and make it just a spike
Looks great. Well done.
Nugent bale handler all the way Adrian... I bought one a few months ago very well built
Another nice video be great to see another in the week but times hard got in farming. Pallet toes fierce handy and can handle bales too 😂
we have a mchale bale handler and with our one you can take of the soft hands and use spike for like hay or straw
We have a lasy 🐕 and good video too.
Fleming bale handler have it myself very strong well built would highly recommend.
Attention to detail is unreal from ya.. The neatness and pride you have unreal..
You should get a Fleming bale spike because they have rollers what slide on and if when you need to lift bales
A lot of people make the mistake with kill switches. They should be on the earth cable not the positive. Mchale bale handler great machine. Have thousands of bales stacked with my one and not a bother to them. Have a tr-4 (elephant trunk bale stacker)for the jcb which are even better again but as u siad u want it for more than stacking bales. So would not be suitable for you. Loader looks well on tractor. U will get used to it don’t think u need to put a camera on it Adrian.
7710 johndeere we’ll c how it goes for this winter
Quickie bale handler is very good the bolts that hold on the rollers are back out of the way an you can’t catch the plastic like a lot of other ones
David Porter never knew that, great info to have. Definitely don’t want the plastic to get torn
Give a look at the quickie flexibal bale handlers .iv two of them here at bales on hire drawing up to 10k bales a year a great handler first one since 08 and never cracked or needed weld .when your wiring that joystick switch it on the earth instead of the positive it stops the buttons burning out on the joystick.u might need to turn up the relief valve for the hydraulics if its not lifting enough weight u can put a gauge on the hyraulics to check the psi output of the pump first
Fleming are very well built 👍
Fleming bale handlers are best, prodig are a very strong handler, mchale aren't too bad either, will you get soft ride for her? Makes a huge difference. To speed up the hydraulics I think you can get a higher geared pump for a 4200 series (same backend) I know you said you were happy with the speed of it but an extra bit of flow is no harm. Great video adrian 👍
Case looks very good, well done. Regarding the amount of vids, I would say quality over quantity. Keep up the good work. 👍🏻
I remember an old man in castlerathan here always started his zetor on the hill 😂😂
Great idea to get a weight for the back by the way, counter weight is vital
Hav a look at tanco bale handlers. Worked with them a peedie bit and there as heavily built as mchale I would say. But you’ll not want to get sumthin to heavy for liftin as you’ll just plumit the size of bales you can lift if you buy sumthin to heavily built
U may get a set of mudguards for her looks a smart tractor Adrian tidy job 👌🚜
I'm looking to buy abit of land in the near future. And your my man for advice of how to go about it and what to look for. I will b in touch with ya in the near future..
It is a great job. Health to enjoy. 👌👌
Quickey flexibal with big tube a great bale handler . I think a loader on the Massey would have been a better tractor with power shuttle a must for loader work only my opinion .best of luck 👍
I’d agree with you, I would have put the loader on the Massey as well
Sean Collins want to keep the Massey free for hedge cutting, big to big and awkward around the yard as well, if the case can’t handle the work we’ll upgrade it for a bigger machine with a loader fitted
I think you need 100hp tractor for loader and newer tractors are very manoeuvrable around yards. Only my opinion . Great video as usual.
Quickie Flexi - bale great multi-use machine and it’s a quickie brand = enough said
tanco a vary good bale handler and love the vids
Another great vid. Cheers.
Nugent make a good bale handler aswel real heavily made
You need to get a pro dig bale handler . Highly recommend it
Looks grand young man!
Hi I had a case 695 it was slow on hydraulic pump you can buy a kit to speed up the hydraulic pump with Gears if you need it 👍
Hi Adrian, great video, would you have pictures of what pipes you connected to under the seat to get a direct feed for the loader, thanks
Would you have the pictures of the pipe for feed and return
Fleming do a good bale handler great job we got one a couple of years ago never give any bother
Love the T-shirt 😊
Enjoying the content keep up the good work 👌👌
Love the vid mate you keep you farm and ect nice 👍
I'd recommend that you put a soft ride on the loader. It makes for safer operation and less stress on the machine and the man due to loader bouncing going over rough roads and fields. Cost around €200 / €250. Well worth it.
The rossmore handlers are a great job very durable and well made
Visibility isnt the best with them unless theres a new version of them
If shes not blue she'll not do It’s a jcb teleporter we have them on to be honest so you could be right
looks fab . will come in handy
Concrete weight for back off tractor is a great job.i have one 👍
Can you show a picture how you plumbed in the hydrolics? I have thw same but 3 hoses.
You should have a look at the Fleming bale handler as well.
The Fleming bale handler are good and strong
Get the rossmore bale handler becouse I live 5 minutes away from them and I would like you to support my local business 😉
Visibility isnt the best with them, unless theres a new version out
Ross more all the way good man to get that loader on
Great videos. Fair play. Fleming handler is the way to go. Have had one for 10+ years. Extra bar on top so bale can’t fall back onto bonnet. Don’t think the other males have that. Are you going to put the bale splitter on the loader?
Gerard Minehane not at the minute, but we may as time goes by
Drew bales for hire for a good few years prodig bale handler all the way. Every other model are too weak steel not in them. 👌Tidy tractor now credit to ya.
Nice vid looks well on it
Bale handlers with spikes are the best great for anything
Buy the Mchale it’s a great handler
Hard to beat a McHale bale handler/spike
get longer bolts to screw up into the 2 half shafts ......where the stablisers go ............ trust me ...........also make a simple plate to go underneath at the bell housing to tie the 2 brackets together ........again trust me on this one ........
Can you lock the rear linkage in constant pumping on that tractor? If available it will make the loader work far faster at low revs.
Roy McLean no linkage can’t be locked unfortunately
Does that work on almost all tractors?
Johnston’s are a great bale spike
Mc hale all the way u can take off the bars and then u have bale forks under the bars nice set up